LEXUS LS430 2003 Factory Repair Manual

Remove the 2 clips.
Fig. 26: Removing 2 Clips (W/O Special Utility Package)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
i. w/o Special utility package:
Disengage the 4 claws and remove the trim cover.
3.REMOVE REAR FLOOR FINISH PLATE
a. Using a clip remover, remove the 5 clips labeled A.
b. Using a screwdriver, disengage the 4 clips labeled B and remove the plate.
HINT:
Tape the screwdriver tip before use.

Fig. 27: Removing Rear Floor Finish Plate
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4.REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSY LH
a. Remove the tool bag.
b. Remove the side trim tool bag cover.

Fig. 28: Removing Side Trim Tool Bag Cover
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Using a clip remover, remove the 2 clips and trim cover.

Fig. 29: Removing 2 Clips And Trim Cover
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. w/ Special utility package:
Usin
g a clip remover, remove the 3 clips and trim cover.

Fig. 30: Removing 3 Clips And Trim Cover (W/Special Utility Package)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Remove the 3 bolts and tool box.

Fig. 31: Removing 3 Bolts And Tool Box
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5.REMOVE FUEL LID LOCK CONTROL ASSY
a. Remove the nut.

Fig. 32: Removing Fuel Lid Lock Control Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Disconnect the connector.
c. Remove the nut and control.

Fig. 33: Removing Nut And Control
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6.INSTALL FUEL LID LOCK CONTROL ASSY
a. Install the control with the nut.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

Fig. 34: Installing Control With Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Connect the connector.
c. Tighten the nut.
Torque: 11.5 N.m (117 kgf.cm, 8 ft.lbf)

Fig. 35: Tightening Fuel Lid Lock Control Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
COMPONENTS