LEXUS LS460L 2016 Owners Manual

651
8
8-1. Specifications
Vehicle specifications
LS460/LS460L_GE (OM50G06E)
■Year of manufacture and coun try of origin (GCC countries*, Yemen
and Lebanon)
The year of the manufacture and country of origin are shown on the
Certification Regulation label.
*: Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar,
Kuwait
■Engine number
2WD models
The engine number is stamped
on the engine block as shown.
AWD models
The engine number is stamped
on the engine block as shown.

6528-1. Specifications
LS460/LS460L_GE (OM50G06E)
*1: For vehicles with model code*2 that has “V” as the last letter
*2: The model code is indicated on the manufacturer’s label or the Certification
Regulation label. ( P. 650)
Engine
Model1UR-FSE1UR-FE
Type8-cylinder V type, 4-cycle, gasoline
Bore and stroke94.0  83.0 mm (3.70  3.27 in.)
Displacement4608 cm3 (281.2 cu. in.)
Valve clearance
(engine cold)Automatic adjustment
Drive belt tensionAutomatic adjustment
Maximum vehicle speed*1250 km/h (155 mph)
Maximum torque (NET)*1493 N•m@4100 rpm455 N•m@4000 rpm
Maximum power (NET)*1285 kW@6400 rpm260 kW@6400 rpm
Fuel
Fuel typePremium unleaded gasoline only
Research Octane
Number
For Brazil95 (Octane rating 91) or higher
Except for Brazil95 or higher
Fuel tank capacity
(Reference)84 L (22.2 gal., 18.4 Imp. gal.)

653
8
8-1. Specifications
Vehicle specifications
LS460/LS460L_GE (OM50G06E)
*: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check
the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the fol-
lowing grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade engine oil
Lubrication system
Oil capacity (Drain and refill—
reference*)
With filter
2WD models
AWD models
Without filter
8.6 L (9.1 qt., 7.6 Imp. qt.)
9.0 L (9.5 qt., 7.9 Imp. qt.)
8.4 L (8.9 qt., 7.4 Imp. qt.)

6548-1. Specifications
LS460/LS460L_GE (OM50G06E)
Recommended viscosity (SAE):
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures, the
engine may become difficult to
start, so SAE 0W-20, 5W-20 or
5W-30 engine oil is recom-
mended.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity (one
with a higher value) may be better suited if the vehicle is operated at
high speeds, or under extreme load conditions.
Temperature range anticipated
before next oil change.

655
8
8-1. Specifications
Vehicle specifications
LS460/LS460L_GE (OM50G06E)
How to read oil container labels:
Either or both API registered marks are added to some oil containers
to help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN”
means the oil quality designation by
American Petroleum Institute
(API).
Center portion: “SAE 0W-20”
means the SAE viscosity grade.
Lower portion: “Resource-
Conserving” means that the oil has
fuel-saving and environmental pro-
tection capabilities.
ILSAC Certification Mark
The International Lubricant Specifi-
cation Advisory Committee
(ILSAC) Certification Mark is dis-
played on the front of the container.
1
2

6568-1. Specifications
LS460/LS460L_GE (OM50G06E)
*1: For the Philippines, Vietnam, Hong Kong, Thailand, Singapore, Malaysia, the
Republic of Indonesia, Brunei, Macao, Taiwan and Korea
*2: For countries other than those listed above
Cooling system
Capacity
2WD
models
11.0 L (11.6 qt., 9.7 Imp. qt.)*1
11.8 L (12.5 qt., 10.4 Imp. qt.)*2
AWD
models11.1 L (11.7 qt., 9.8 Imp. qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology
Do not use plain water alone.
Ignition system
Model 1UR-FSE 1UR-FE
Spark plug
MakeDENSO FK20HBR11DENSO SK20HR11
Gap1.1 mm (0.043 in.)1.1 mm (0.043 in.)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

657
8
8-1. Specifications
Vehicle specifications
LS460/LS460L_GE (OM50G06E)
*: The fluid capacity is a reference quantity.
If replacement is necessary, contact your Lexus dealer.
Electrical system
Battery
Specific gravity reading
at 20 C (68F):
1.25 or higher
If the specific gravity is lower than the standard value,
charge the battery.
Charging rates
Quick charge
Slow charge
15 A max.
5 A max.
Automatic transmission
Fluid
capacity*
2WD
models10.3 L (10.9 qt., 9.1 Imp. qt.)
AWD
models10.7 L (11.3 qt., 9.4 Imp. qt.)
Fluid typeToyota Genuine ATF WS
NOTICE
■Automatic transmission fluid type
Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterio-
ration in shift quality, locking up of your transmission accompanied by vibration,
and ultimately damage the transmission of your vehicle.

6588-1. Specifications
LS460/LS460L_GE (OM50G06E)
*: Your Lexus vehicle is filled with Toyota genuine gear oil at the factory. Use Lexus
approved Toyota genuine gear oil or an equivalent of matching quality to satisfy
the above specification. Please contact your Lexus dealer for further details.
*: Your Lexus vehicle is filled with “Toyota Genuine Differential Gear Oil” at the fac-
tory. Use Lexus approved “Toyota Genuine Differential Gear Oil” or an equiva-
lent of matching quality to satisfy th e above specification. Please contact your
Lexus dealer for further details.
2WD models (vehicles without paddle shift switches)
2WD models (vehicles with paddle shift switches) and AWD models
*: Your Lexus vehicle is filled with “Toyota Genuine Differential Gear Oil” at the fac-
tory. Use Lexus approved “Toyota Genuine Differential Gear Oil” or an equiva-
lent of matching quality to satisfy th e above specification. Please contact your
Lexus dealer for further details.
Transfer (AWD models)
Oil capacity0.70 L (0.74 qt., 0.62 Imp. qt.)
Oil type and viscosity*Toyota Genuine Transfer gear oil LL 80 or
equivalent
Front differential (AWD models)
Oil capacity0.75 L (0.79 qt., 0.66 Imp. qt.)
Oil type and viscosity*Toyota Genuine Differential gear oil LT
75W-85 GL-5 or equivalent
Rear differential
Oil capacity1.35 L (1.42 qt., 1.19 Imp. qt.)
Oil type and viscosity*Toyota Genuine Differential gear oil LT
75W-85 GL-5 or equivalent
Oil capacity1.35 L (1.42 qt., 1.19 Imp. qt.)
Oil type and viscosity*Toyota Genuine Differential gear oil LX
75W-85 GL-5 or equivalent

659
8
8-1. Specifications
Vehicle specifications
LS460/LS460L_GE (OM50G06E)
*: Minimum pedal clearance when depressed with a force of 500 N (51 kgf, 112 lbf)
while the engine is running.
When performing the brake pedal inspection, also be sure to check that the
brake system warning light is not illuminated when the engine is running (If the
brake system warning light is illuminated, refer to P. 605).
Brakes
Pedal clearance*147 mm (5.8 in.) Min.
Pedal free play1.0 - 2.0 mm (0.04 - 0.08 in.)
Fluid typeSAE J1703 or FMVSS No.116 DOT 3 or,
SAE J1704 or FMVSS No.116 DOT 4
Steering
Free playLess than 30 mm (1.2 in.)

6608-1. Specifications
LS460/LS460L_GE (OM50G06E)
18-inch tires
*: A rating closer to “1” indicates higher performance.
Tires and wheels (for Korea)
Tire manufacturerBridgestoneDunlopMichelin
Tire rolling resistance
rating (5 levels)*434
Tire wet grip rating
(5 levels)*333
Tire sizeP235/50R18 97V
Tire inflation pressure
(Recommended cold
tire inflation pressure)
Driving under normal conditions
Front: 230 kPa (2.3 kgf/cm2 or bar, 33 psi)
Rear: 230 kPa (2.3 kgf/cm2 or bar, 33 psi)
Driving at high speeds above 160 km/h (100 mph) (in
countries where such speeds are permitted by law)
Add 40 kPa (0.4 kgf/cm2 or bar, 6 psi) to the front tires,
70 kPa (0.7 kgf/cm2 or bar, 11 psi) to the rear tires.
Never exceed the maximum cold tire inflation pressure
indicated on the tire sidewall.
Wheel size18  7 1/2J
Wheel nut torque140 N•m (14.3 kgf•m, 103 ft•lbf)