Start MAZDA CX90 2024 Workshop Manual

How to Use the FullyAutomatic Climate Control
1. Start the hybrid system.
2.
The AUTO switch indicator light
turns on.
3. Press the temperature setting switch to set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
4. To stop the operation, press the climate control system power
switch.
NOTE
ï‚·The recommended set temperature
is 22 °C (72 °F).
ï‚·If any mode selector switch, fan
control switch, or windshield
defroster switch is operated during
auto operation, the AUTO switch
indicator light turns off. The
functions for switches other than
those operated will continue to
operate in auto control.
ï‚·The power consumption of the air
conditioner changes depending on
the set temperature and the ambient
temperature. If the set temperature is
too low or high, the remaining
distance-to-full discharge shortens.
ï‚·The climate control system can be
used while charging when the
vehicle power is switched ON.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-7
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Airflow selection
Dashboard Vents
Dashboard and Floor Vents
Floor Vents
Fully Automatic ClimateControl System
The following functions are
automatically controlled according to
the set temperature.
Airflow temperature controlAirflow amount controlAirflow mode switching
NOTE
To p r e v e n t c o l d airflow immediately
after heating starts when the hybrid
system is cold, the airflow amount is
decreased.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-16
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the FullyAutomatic Climate Control System
(Operation from front seats)
1. Start the hybrid system.
2. Turn the front climate control system on.
3.
The indicator light turns on.
NOTE
When the rear climate control
system is turned on using the Rear
climate control system power
switch, each setting is the setting
before the rear climate control
system was turned off.
4.
The indicator light turns on and the
screen changes to the rear climate
control system operation screen.
5. Press the temperature setting switch to set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
ï‚·The following switches cannot be
operated while the rear climate
control system operation screen is
displayed.
ï‚·Air intake selector switchï‚·Front passenger’s side
temperature setting switch
ï‚·A/C switchï‚·If none of the following switches
are operated, the screen returns
to the front climate control
system operation screen after 10
seconds.
ï‚·AUTO switchï‚·Driver’s side temperature
setting switch
ï‚·SYNC (synchronized
temperature) switch
ï‚·Mode selector switchï‚·Fan control switch
6. To stop the operation, press the climate control system power
switch.

Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-19
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

(Operation from rear seats)
1. Start the hybrid system.
2.
3.
4. Press the temperature setting switchto set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
ï‚·The recommended set
temperature is 22 ℃(72 °F).
ï‚·If mode selector switch or fan
control switch is operated during
auto operation, the AUTO switch
indicator light turns off.
ï‚·If the AUTO switch is pressed
while the front A/C switch is off,
the rear air conditioner operates
only to circulate air.
5. To stop the operation, press the climate control system power
switch.
Operating Each Switch
AUTO switch
Automatically controlled according to
the set temperature.
Temperature setting switch
How to increase the set temperature
How to decrease the set temperature
NOTE
ï‚·The set temperature changes in
increments of 0.5 ℃ within a range
of 15 ℃ (60 °F) and 29 ℃ (84 °F).
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-20
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

CAUTION
Do not use organic solvents to clean
the seat. It may damage the seat
surface and the heater.
 (second-row)
Before folding a second-row
seatback, make sure that the
second-row seat warmer switch is
off. If a second-row seatback is
folded while the second-row seat
warmer is in operation, it may heat
the seat excessively and damage the
seat surface.
How to Use the Seat
Warmer
1. Start the hybrid system.
2.Front
1. OFF
2. High
3. Mid
4. Low
Second-row seat
*
1. OFF
2. High
3. Mid
4. Low
The indicator light in the seat
warmer switch turns on according
to the set temperature.
The set temperature changes each
time the seat warmer switch is
pressed.
Equipment to Make Cabin More Comfortable
Seat Warmer
*Some models.6-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
If the hybrid system is stopped while
the seat warmer is operating in manual
mode, the seat warmer does not turn
on automatically the next time the
hybrid system is started. To turn the
seat warmer on, press the switch
again.
In addition, the second-row seat
warmer operation stops automatically
after the seat warmers have operated
for a certain period of time.Convenient Ways to Usethe Seat Warmer
The seat temperature for front seat can
be automatically controlled (auto
mode) at 4 levels (High, Mid, Low,
OFF) according to the conditions in the
cabin.
The seat warmer can be operated in
conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort”Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the climate control system.
NOTE
ï‚·If the front passenger’s seat belt is
unfastened, the front passenger’s
seat warmer turns off.
ï‚·If any of the following switch
operations is performed during auto
mode or the auto operation of the
climate control system is canceled,
the seat warmer switches from auto
mode to manual mode.
ï‚·Seat warmer switch is pressedï‚·Seat ventilation switch is pressed
When the seat warmer switch/seat
ventilation switch is pressed, only the
seat on the side where the switch
was pressed switches to manual
mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
ï‚·While operating in auto mode, the
(with heated steering wheel)/
(without heated steering wheel)
is displayed.
Equipment to Make Cabin More Comfortable
Seat Warmer
6-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use HeatedSteering Wheel
Using the Heated Steering Wheel
1. Start the hybrid system.
2.
1. Heating area
The indicator light in the heated
steering wheel switch turns on.
NOTE
The heated steering wheel operates for
a certain period of time and then stops
automatically.
Turning Off the Heated Steering
Wheel
Press the heated steering wheel switch.
The heated steering wheel stops and
the indicator light in the switch turns
off.
Convenient Ways to Use
Heated Steering Wheel
The steering warmer can be
automatically (auto mode) turned
on/off depending on the conditions in
the cabin.
The steering warmer can be operated
in conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort” Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the
climate control system.
NOTE
ï‚·If the heated steering wheel switch is
pressed during auto mode or the
auto operation of the climate control
system is canceled, the heated
steering wheel switches from auto
mode to manual mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
ï‚·If the vehicle power is switched OFF
while the heated steering wheel is
operating in auto mode, the heated
steering wheel operates in auto
mode again the next time the vehicle
power is switched ON.
Equipment to Make Cabin More Comfortable
Heated Steering Wheel
6-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the SeatVentilation
1. Start the hybrid system.
2.Front
1. OFF
2. High
3. Mid
4. Low
Second-row seat
*
1. OFF
2. High
3. Mid
4. Low
While the seat ventilation is
operating, the indicator light in the
seat ventilation switch turns on
according to the set mode.
NOTE
If the hybrid system is stopped while
the seat ventilation is operating in
manual mode, the seat ventilation
does not turn on automatically the
next time the hybrid system is started.
To turn the seat ventilation on, press
the switch again.
Equipment to Make Cabin More Comfortable
Seat Ventilation
6-28*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the WirelessCharger (Qi)
1. Start the hybrid system.The power for the Wireless Charger
(Qi) turns on and the LED indicator
turns on.
2. Place a device compliant with the
Qi Wireless Charging standard
(portable device with a maximum
power consumption of 5 W or 15
W or below) in the center of the
charging area on the tray.
1. Charging area
2. LED indicator
The LED indicator turns on in amber
or green when charging starts.
Charging starts when all the doors
and liftgate are closed.
For details on the LED indicator, refer
to the following LED indicator table.
Charging status display
The charging status of the Wireless
Charger (Qi) can be checked with the
LED indicator or the icon displayed on
the center display.
Illumina-
tion/flash pattern Icon indi-
cation Status
Does not turn on ―Indicates that charg-
ing is turned
off.
Tu r n s o n i n white
Indicates that charg-
ing is possible.
Tu r n s o n i n amber
Indicates normal
charging.
Tu r n s o n i n green
Indicates fast charg-
ing*1.
Flashes in white
Indicates that the
charging conditions
are not met.
Flashes in red
Indicates that charg-
ing is not possible
because a high tem-
perature is detected.
Indicates that charg-
ing is not possible
because foreign mat-
ter is detected.
Tu r n s o n i n red
Indicates that there
is a problem with
Wireless Charger
(Qi) and it needs to
be repaired. Consult
an Authorized Maz-
da Dealer.
*1 Some mobile devices can switchbetween normal charging and fast
charging.
Other Equipment
Wireless Charger (Qi)
7-56
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
ï‚·Charging efficiency may be reduced
or charging may not be possible
depending on the use environment
and conditions.
ï‚·Depending on the mobile device
case or accessories used, the mobile
device may not charge, or the
charging efficiency may be reduced
resulting in a longer charging time. If
charging does not start even when a
mobile device is placed on the
charging area, remove the case or
accessory.
ï‚·Depending on the vehicle condition,
charge amount may be temporarily
restricted and charging may be
canceled, however, this does not
indicate a problem.
ï‚·If the mobile device temperature
rises during charging, charging may
stop due to the protection function
of the device. If that happens, wait
until the mobile device cools down
sufficiently and then recharge it.
ï‚·When using the Wireless Charger
(Qi), applications using the Near
Field Communicatio
n (NFC) function
may launch, however, this does not
indicate a problem with the Wireless
Charger (Qi).
ï‚·While i-stop is operating, charge
amount may be temporarily
restricted and charging may be
temporarily canceled, however, this
does not indicate a problem.
ï‚·Charging may be temporarily
canceled depending on the vehicle
conditions, such as when the engine
is stopped.
Convenient Ways to Use
the Wireless Charger (Qi)
The Wireless Charger (Qi) can be
turned on/off and the connection
mode can be switched.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Other Equipment
Wireless Charger (Qi)
7-57
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04