MAZDA MODEL CX-5 2017 Smart Start Guide (in English)

m{zd{ cx-5 40
AUDIO CONTROLS
(IF EQUIPPED)
AUDIO OPERATION USING VOICE
Audio operation and media selection can be done using voice recognition. Push the
TALK
button on the steering wheel, wait for a beep, then say a command in a clear,
natural voice (not too fast or too slow). Some common commands are listed below.
Play (and any of the following):
AM, FM, XM, Bluetooth
®, Aha, Pandora, Stitcher, USB, AUX
Play or Resume/Pause or Stop/Next or Previous Play (and any of the following when
connected to USB port): Song, Playlist <playlist name>, Artist <artist name>, Album
<album name>, Genre <genre name>, Folder <folder name>
Tune to Station: <FM or AM then frequency>
Tune to Channel Number (XM)
NOTE: Push the TALK button and say “Help” at any time to hear a list of
available commands.
BLUETOOTH® (BT) AUDIO
Bluetooth®-enabled phones and audio players provide an opportunity to play music
through the audio system without wires.
Some phone models do not support all features. Go to www.mazdausa.com/ mazdaconnect or contact (800) 430-0153 for further assistance or to report a phone/
audio device concern.
NOTE: To use BT audio, make sure the musical icon is displayed by going to
Bluetooth® in Device Settings. Some Bluetooth® audio devices need a certain amount of
time before the icon is displayed.
PLAYING BLUETOOTH® AUDIO
1 Make sure the BT audio device is paired to your vehicle.
2
Turn on the BT audio device and open the audio app on the device.
3 Select Bluetooth
® from Sources. See your Owner’s Manual for further information on
Pandora, Aha, and Stitcher operations.
NOTE: In order to use Aha, Pandora and Stitcher as audio sources, the app must be
installed on your phone. These apps stream music using your data plan and listening to
them counts toward your monthly cellular data usage.
2364256 17a CX-5 SSG 030117.indd 403/1/17 5:52 PM

41 MAZDAUSA.COM
AUDIO USB and AUX INPUTS
PORTABLE AUDIO PLAYER INTEGRATION USING
THE USB PORT OR AUX JACK
Your vehicle is equipped with one or two USB ports
(depending on vehicle grade) and an AUX jack in the center
console that allow you to play your iPod, USB device, or portable audio player through the vehicle’s audio system. Learn the system when parked and do not let it distract
you while driving.
Locate the USB port or AUX jack.
1
Connect your portable audio player into the USB port or
AUX jack.
2
Turn the vehicle's audio system on.
3
Audio Controls: Select AUX or USB from the Sources menu.
4
USB Port: Use the vehicle’s audio system or steering wheel
controls to control the connected USB device.

5
AUX Jack: Use the portable audio player controls to
play music.
IMPORTANT: Set the volume level on your portable audio player to the highest level
before distortion starts, then use the vehicle’s audio system to adjust the volume.
NOTE: You will need an audio cable with an 1/8 inch (3.5 mm) mini stereo
plug (available as a Genuine Mazda accessory) to connect your portable
audio player into the AUX jack.
AUX
USB
TYPE “B”
AUX
USB
TYPE “A”
2364256 17a CX-5 SSG 030117.indd 413/1/17 5:52 PM

m{zd{ cx-5 42
AUDIO USB and AUX INPUTS
REAR SEAT USB CHARGING PORTS
The rear seat console has two 2.1 amp USB charging ports that charge your USB-powered device so that you can
enjoy your portable media in the rear seat. These rear seat USB charging ports cannot be used for audio playback through the Mazda Connect system. Refer to the Owner’s Manual for additional information.
NOTE: When using a USB memory stick, the system plays the first audio file when
restarting the vehicle. It does not start where it left off when turning off the engine.
12 VOLT ACCESSORY SOCKETS
The accessory sockets are on with the ignition in ACC or ON. There is an accessory socket located at the front and
rear of the vehicle.
NOTE: When using the accessory socket, make sure to disconnect any device from it
when turning off the ignition; otherwise, the vehicle’s battery could go dead.
Front ACC Socket
REAR ACC SOCKET
CENTER ACC SOCKET
REAR SEAT USB PORTS
2364256 17a CX-5 SSG 030117.indd 423/1/17 5:52 PM

43 MAZDAUSA.COM
AUTOMATIC CLIMATE CONTROL
(IF EQUIPPED)
DRIVER'S TEMPERATURE CONTROL DIAL
AUTO ON: Push the dial to turn automatic air conditioning system on (AUTO ON and
A/C indicator on). The airflow mode, fan speed and air conditioning will be automatically controlled in accordance with the set temperature.
PASSENGER'S TEMPERATURE CONTROL DIAL
Push to turn DUAL mode ON/OFF.
•
With DUAL mode ON (indicator on), rotate the dial to set the passenger’s side
temperature separate from the driver’s side.
•
With DUAL mode OFF (indicator off), the driver controls the temperature setting on
both sides.
NOTE: A/C indicator will illuminate when AUTO ON is active. The air conditioning
cycles on/off as necessary to maintain the set temperature. The A/C may operate
even while heating is desired - this is to prevent excess humidity and fogging.
Automatic climate control will allow you to maintain individual preset cabin temperatures for the driver and passenger when DUAL is pushed.
Automatic temperature control always works even if the AUTO indicator turns off by changing the fan speed or airflow mode.
Driver's Temperature Control Dial Passenger's Temperature
Control Dial
2364256 17a CX-5 SSG 030117.indd 433/1/17 5:52 PM

m{zd{ cx-5 44
AUTOMATIC CLIMATE CONTROL
(IF EQUIPPED)

Push the fan (+) and (-) buttons to select the desired fan speed.

Push to manually turn air conditioning on or off.
OFFPush the OFF switch to turn the climate control system off.

Push to receive fresh air in the cabin.

Push to recirculate cabin air.
Push to select the following airflow mode:
Dashboard vents

Dashboard and floor vents
Floor vents

Defroster and floor vents

Push to defrost the windshield.
Push to defrost the rear window.
WINDSHIELD WIPER DE-ICER
The thermal filaments in the windshield heat up to allow the wipers to move freely in icy conditions. The windshield wiper de-icer operates in conjunction with the rear
window defogger.
To turn on the windshield wiper de-icer, switch the ignition ON and press the rear window defogger switch.
WINDSHIELD WIPER DE-ICER POSITIONS
2364256 17a CX-5 SSG 030117.indd 443/1/17 5:53 PM

45 MAZDAUSA.COM
GLOSSARY OF WARNING AND INDICATOR LIGHTS
IMPORTANT:
When your Mazda Connect display setting is set on “AUTO”, the instrument
cluster and display may become dimmer when the headlights are on. If the display and instrument cluster become too dim or too bright when the headlights are on, simply rotate
the dimmer knob located on your instrument cluster to adjust the brightness.
Traction Control System OFF

Low Engine Oil Pressure
Traction Control System/ Dynamic
Stability Control
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
Shift Position
Advanced key detected
Advanced key not detected (p. 5)
Power Steering Malfunction
Airbag/Front Seat Belt
Pretensioner System Malfunction
Turn Signals/Hazard Warning
All-Wheel Drive ON
Flashing: Stop vehicle/
tow to Mazda dealer.
Check Engine
Master Warning
Smart Brake Support and
Smart City Brake Support
Flashing Red: SBS and SCBS
are operating.
Smart Brake Support and
Smart City Brake Support OFF
Amber: SBS and/or SCBS malfunction.
Tire Pressure Monitoring System
Warning* (p. 7)
On/Warning Beep: Low tire pressure in one or more tires.
Flashing: TPMS malfunction.
Security
Cruise Main ON (Amber)/
Cruise Set ON (Green)
Automatic Transaxle Warning
Lights ON (Exterior) (p. 35)
INSTRUMENT CLUSTER
Type "Å" Instrument Cluster (with LCD multi-information display) shown.
Refer to Owner's Manual for type "B" instrument cluster (without multi-information display) information.
Fuel
Gauge
LCD Information
Display
Dashboard Illumination/
Dimmer1/Trip Meter2
Speedometer
Tachometer
Shift

Position Odometer/
Trip Meter
2364256 17a CX-5 SSG 030117.indd 453/1/17 5:53 PM

m{zd{ cx-5 46
INSTRUMENT CLUSTER
Type "Å" Instrument Cluster (with LCD multi-information display) shown.
Refer to Owner's Manual for type "B" instrument cluster (without multi-information display) information.
Blind Spot Monitoring OFF
(p. 33)
Seat Belt Unbuckled/Malfunction
Headlight High Beams ON
Electric Parking Brake
Brake Warning
Parking brake on/
low brake fluid/malfunction

Adaptive Front-lighting System
OFF (p. 37)
Charging System Malfunction
Mazda Radar Cruise Control
Stop & Go Function and AUTOHOLD
Door Ajar
Liftgate Ajar
Low Washer Fluid Level
Anti-lock Brake
System Malfunction
Low Fuel Level
Check Fuel Cap
Perform Maintenance
High Beam Control ON
Mazda Radar Cruise Control
ON (White)
SET (Green)
SPORT Mode ON
LED Headlight
Brake Pedal Operation Demand
Lane-keep Assist System and
Lane Departure Warning System
TPMS NOTE: Low ambient temperature and/or high altitude causes tire pressures to
drop and may turn the TPMS warning light on. If the warning light comes on, check the tire pressure and fill the tires as soon as possible, preferably before moving the vehicle
and warming up the tires. Tire pressure should be checked when the tires are cold.
See your Owner’s Manual for more details and explanations.
1 Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.
2 Push to toggle between trip meter (A & B). When a trip meter is selected, push and hold to reset to zero.
TYPE B
Information Display
ENGINE COOLANT TEMPERATURE LIGHTS
Since this vehicle does not use an engine coolant temperature
gauge, red and blue engine coolant temperature lights are used to indicate high and low coolant temperature.
Red Coolant Temperature
FLASHING: Engine is starting to
run hot. Drive slowly to reduce
engine load.
ON: Engine is overheating.
Safely pull over to the side of the road and turn the engine off.
Refer to the Owner’s Manual for
more information. Blue Coolant Temperature
ON: Engine coolant is cold and
no warm air is available for heater/defroster.
OFF: Engine coolant is warm and
warm air is available for heater/
defroster. The light may stay on for a few minutes after start-up
when the engine is cold, but the vehicle can be driven with the light on or off.
2364256 17a CX-5 SSG 030117.indd 463/1/17 5:53 PM

47 MAZDAUSA.COM
MANUAL SHIFT MODE
Manual Shift Mode gives you the feel of driving a manual transmission by allowing you
to manually shift to control engine rpm and torque when more control is desired.
To Use Manual Shift Mode:
Shift the lever from D to M.
To Shift Up To A Higher Gear:
Tap the shift lever back (+) once.
To Shift Down To A Lower Gear:
Tap the shift lever forward (-) once.
DRIVE SELECTION
SPORT mode will choose a lower gear for increased
acceleration response. It will also hold a lower gear/
delay upshifting when it detects you are braking or
cornering because it anticipates that you will want to
accelerate out of the turn more quickly.
Push the SPORT button to switch to SPORT mode
and the SPORT mode indicator light in the instrument
cluster turns on. Push again to turn off.
NOTE: If the SET button of the cruise control is pushed while in SPORT mode, SPORT
mode is switched off. SPORT mode cannot be turned on or off when cornering.
• When the ignition is switched OFF, SPORT mode is also switched off.
• Fuel consumption increase s slightly when using SPORT mode.
FUEL ECONOMY
To achieve the best fuel economy, visit www.fueleconomy.gov
for more information.
AUTOMATIC TRANSMISSION
(IF EQUIPPED)
SPORT Button
2364256 17a CX-5 SSG 030117.indd 473/1/17 5:53 PM

m{zd{ cx-5 48
AUTOMATIC TRANSMISSION
(IF EQUIPPED)
ACTIVE ADAPTIVE SHIFT (AAS) CONTROL
AAS will automatically adjust how and when the transmission shifts gears based on
road conditions and your driving style. The transmission may stay in a lower gear
longer than usual when going up or down hills or driving around corners. This feature
gives you better control and a more connected driving experience.
ACCELERATOR PEDAL KICKDOWN SWITCH
The accelerator pedal is equipped with a kickdown switch designed
to allow optimal engine performance while accelerating.
When you depress the accelerator 90% of the way, you will feel an
increase in resistance. Push harder, and you will feel a click as you
activate the kickdown switch. The transmission will usually downshift
(depending on engine speed) and the engine will switch to maximum power
mode. This kickdown switch function is the same in both Manual Shift Mode and in “D”.
HILL LAUNCH ASSIST (HLA)
HLA helps assist you when accelerating the vehicle from a stop while on a hill or slope.
When the brake pedal
is released and the
accelerator pedal is
pushed, HLA prevents
the vehicle from rolling
forward or backward. It
operates on a downward
slope when the shift
lever is in the reverse
(R) position and on an
upward slope when the
shift lever is in a position
other than the reverse (R) position.
IMPORTANT : The HLA system will hold the vehicle for a maximum of two seconds
while the driver is changing from the brake pedal to the accelerator pedal.
2364256 17a CX-5 SSG 030117.indd 483/1/17 5:53 PM

49 MAZDAUSA.COM
AUTO-DIMMING MIRROR
•
Auto-dimming will automatically darken your rearview mirror to reduce
headlight glare from vehicles behind you.
• Auto-dimming is activated every time the engine is started.
NOTE: In addition to the auto-dimming mirror’s rear light sensor, there is also a front
light sensor (not shown). Do not place or hang any objects over the front or rear mirror
light sensors; otherwise, the auto-dimming mirror will not operate properly.
AUTO-DIMMING MIRROR
(IF EQUIPPED)
OFF
ON
Rear Light Sensor
Indicator Light
2364256 17a CX-5 SSG 030117.indd 493/1/17 5:53 PM