water pump MITSUBISHI LANCER 2005 User Guide

CHARGING SYSTEM
ENGINE ELECTRICAL16-14
REMOVAL SERVICE POINT
<<A>> SHIFT CABLE AND SHIFT CABLE
BRACKET ASSEMBLY REMOVAL
Remove the shift cable bracket installation bolt with
the shift cable installed on the shift cable bracket,
and remove the shift cable and shift cable bracket
assembly from the transmission.
<<B>> ALTERNATOR ASSEMBLY
REMOVAL
After removing the alternator assembly installation
bolts and nut, move the alternator assembly to the
transmission side and remove the alternator
assembly upward the engine room through the
clearance between the transmission and the inlet
manifold.
AC303827
65
84
9 7
22 ± 4 N·m
23 ± 3 N·m
8.8 ± 1.0 N·m44 ± 10 N·m
AB
Removal steps
4. Battery wiring harness clamp
5. Engine oil pressure switch
connection
6. Alternator connector<<B>>7. Alternator assembly
8. Water pump pulley
9. Alternator braceRemoval steps (Continued)
AC302930AB
Alternator
assemnly