MITSUBISHI LANCER SPORTBACK 2010 8.G Owners Manual

7-70 Vehicle care and maintenance
7
3. Turn the socket (C) counterclockwise to remove it. 4. Pull the bulb out of the socket.
5. To install the bulb, perform the removal steps in reverse.*- Front of the vehicle
BK0103001US.book 70 ページ ２００９年８月２０日　木曜日　午前１０時４５分

Vehicle care and maintenance
7-71
7
Front side-marker and parking lights (for vehi-
cles equipped with high intensity discharge head-
lights)
N00917300453
1. To create enough work space, turn the steering wheel all
the way in the direction opposite to the side you wish to
replace.
2. Remove the clips (A), and screw (B) or bolts (B) to turn
up the cover (C).Except for vehicles
with turbocharger
Vehicles with
turbocharger
BK0103001US.book 71 ページ ２００９年８月２０日　木曜日　午前１０時４５分

7-72 Vehicle care and maintenance
7
3. Turn the socket (D) counterclockwise to remove it.
4. Pull the bulb out of the socket.5. To install the bulb, perform the removal steps in reverse.
BK0103001US.book 72 ページ ２００９年８月２０日　木曜日　午前１０時４５分

Vehicle care and maintenance
7-73
7
Front turn signal lights
N00943400295
1. Remove the clips (A) and clips (B), then remove the duct
(C) and the upper cover (D).Except for vehicles with turbocharger
Vehicles with turbocharger
BK0103001US.book 73 ページ ２００９年８月２０日　木曜日　午前１０時４５分

7-74 Vehicle care and maintenance
7
2. Remove the entire socket and bulb assembly (E) by turn-
ing it counterclockwise.3. Remove the bulb by pulling it out.
4. To install the bulb, perform the removal steps in reverse.*- Front of the vehicle
BK0103001US.book 74 ページ ２００９年８月２０日　木曜日　午前１０時４５分

Vehicle care and maintenance
7-75
7
Front fog lights (except for vehicles equipped
with turbocharger)
N00943600659
1. Remove the screw (A) and pull the cover out.2. Remove the screws (B) and pull the entire light unit out.
BK0103001US.book 75 ページ ２００９年８月２０日　木曜日　午前１０時４５分

7-76 Vehicle care and maintenance
7
NOTE

When unfastening the screws, be careful not to mistakenly
move the beam position adjustment screw (C).3. Push the connector (D) to disconnect and remove the fog
light.
BK0103001US.book 76 ページ ２００９年８月２０日　木曜日　午前１０時４５分

Vehicle care and maintenance
7-77
7
4. Remove the bulb assembly (E) by turning it counterclock-
wise.
5. To install the bulb, perform the removal steps in reverse.
NOTE

When mounting the cover, align the hooks (F) on the
cover with the hole in the body.
BK0103001US.book 77 ページ ２００９年８月２０日　木曜日　午前１０時４５分

7-78 Vehicle care and maintenance
7
Front fog lights (for vehicles equipped with tur-
bocharger)
N00943600662
1. Remove the screw (A).
CAUTION
!

Handle halogen light bulbs with care. The gas inside
a halogen light bulb is highly pressurized, so drop-
ping, knocking, or scratching a halogen light bulb
can cause it to shatter.


Never hold the halogen lights bulb with a bare hand,
dirty glove, etc.
The oil from your hand could cause the bulb to
break the next time the fog lights are used.
If the glass surface is dirty, clean it with alcohol and
let it dry completely before installing the bulb.
BK0103001US.book 78 ページ ２００９年８月２０日　木曜日　午前１０時４５分

Vehicle care and maintenance
7-79
7
2. Pull the cover out in the direction of the arrow shown in
the illustration.3. Remove the screws (B) and pull the entire light unit out.
Passenger’s side Driver’s side
BK0103001US.book 79 ページ ２００９年８月２０日　木曜日　午前１０時４５分