buttons MITSUBISHI MIRAGE 2014 6.G MMCS Manual

30
Entering an address (United States)
To enter an address as the destination, do as
follows:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. By default, MMES proposes the country
and state where you are. If needed, tap
, enter the first few
letters of the destination country or state
on the keyboard, and select one from the
list. If you select a country without a state,
you can search for a city/town in all its
states.
4. Select a new city/town:
a.
Tap . The city/town
of your current location is offered by
default. For a local search, tap

to accept it, otherwise continue with
entering the destination city/town name.
b. Start entering the name of the city/
town on the keyboard.
c. Find the city/town you need:
The most likely city/town name is
always shown in the input field. To
accept it, tap
.
If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the city/
town from the list.
5. Enter the street name:
a. Tap
.
b. Start entering the street name on the
keyboard.
c. Find the street you need: The most likely street name is
always shown in the input field. To
accept it, tap
.
If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the
street from the list.
6. Enter the house number:
a. Tap
.
b. Enter the house number on the
keyboard. (To enter letters, tap
).
205-0010-00_QY-7375M-A_EN.indb 30205-0010-00_QY-7375M-A_EN.indb 303/12/2013 9:57:16 AM3/12/2013 9:57:16 AM

31
c. Tap to finish
entering the address. (If the entered
house number cannot be found, the
midpoint of the street is selected as the
destination.)
7. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify the
destination. The Cursor (
) appears at
the new location. Tap

to confirm the destination, or tap
to select a different
destination.
8. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Note:
If you know that you will use this destination
frequently, before tapping

to confirm the destination, put it on the list of
your Favorites first: tap

then
, give a name for the
new Favorite, and tap
to
save the location. The map with the destination
returns automatically. Now you can start your
journey.
Entering an address (Canada)
To enter an address as the destination, do as
follows:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. By default, MMES proposes the country,
state and city/town where you are. If
needed, tap
, enter the
first few letters of the destination country
or state on the keyboard, and select
one from the list. If you select a country
without a state, you can search for a city/
town in all its states.
4. If needed, select a new city/town:
a. Tap
.
b. Start entering the name of the city/
town on the keyboard.
205-0010-00_QY-7375M-A_EN.indb 31205-0010-00_QY-7375M-A_EN.indb 313/12/2013 9:57:17 AM3/12/2013 9:57:17 AM

33
8. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Entering an address starting with
the street name (in the United
States only)
You can leave the city/town name empty and
start the search with the street name. This
way you can search in all streets of a state.
Do as follows:1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. By default, MMES proposes the country
and state where you are. If needed, tap
the button with the name of the country,
enter the first few letters of the destination
country or state on the keyboard, and
select a country and state from the list. If
you select the country without a state, this
function cannot work.
4. Enter the street name:
a. Tap
.
b. Start entering the street name on the
keyboard.
c. Find the street you need:
The most likely street name is
always shown in the input field. To
accept it, tap
. If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the
street from the list.
5. Enter the house number:
a. Tap
.
b. Enter the house number on the
keyboard. (To enter letters, tap
).
c. Tap
to finish
entering the address. (If the entered
house number cannot be found, the
midpoint of the street is selected as the
destination.)
205-0010-00_QY-7375M-A_EN.indb 33205-0010-00_QY-7375M-A_EN.indb 333/12/2013 9:57:18 AM3/12/2013 9:57:18 AM

34
6. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify the
destination. The Cursor (
) appears at
the new location. Tap

to confirm the destination, or tap
to select a different
destination.
7. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Entering the midpoint of a street
as the destination
You can navigate to the midpoint of a street if
the house number is not available:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Select the country, state and city/town as
described earlier (page 30).
4. Enter the street name:
a. Tap
.
b. Start entering the street name on the
keyboard.
c. Find the street you need:
The most likely street name is
always shown in the input field. To
accept it, tap
. If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the
street from the list.
5. Instead of entering the house number, tap
. The midpoint of the
street is selected as the destination.
205-0010-00_QY-7375M-A_EN.indb 34205-0010-00_QY-7375M-A_EN.indb 343/12/2013 9:57:18 AM3/12/2013 9:57:18 AM

35
6. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify the
destination. The Cursor (
) appears at
the new location. Tap

to confirm the destination, or tap
to select a different
destination.
7. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Selecting an intersection as the
destination
To enter an address as the destination, do as
follows:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Select the country, state and city/town as
described earlier (page 30).
4. Enter the street name:
a. Tap
.
b. Start entering the street name on the
keyboard.
c. Find the street you need:
The most likely street name is
always shown in the input field. To
accept it, tap
.
If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the
street from the list.
5. Enter the intersecting street name:
1. Tap
.
If only a few intersecting streets
exist, their list appears immediately.
In case of a longer street, the
keyboard screen appears.
Start entering the name of the
intersecting street on the keyboard.
As soon as the street names that
match the entered string can be
shown on one screen, their list
appears automatically. Select from
the list.
205-0010-00_QY-7375M-A_EN.indb 35205-0010-00_QY-7375M-A_EN.indb 353/12/2013 9:57:18 AM3/12/2013 9:57:18 AM

36
6. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify
the destination. The Cursor (
)
appears at the new location.
Tap
to confirm the
destination, or tap
to
select a different destination.
7. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Selecting a city/town center as the
destination
The city/town center is not the geometric
center of the city/town but an arbitrary point
the map creators have chosen. In towns
and villages, it is usually the most important
intersection; in larger cities, it is one of the
important intersections.
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Select the country and state as described
earlier (page 30).4. Select the destination city/town:
a. Tap
.
b. Start entering the name of the city/
town on the keyboard.
c. Find the city/town you need:
The most likely city/town name is
always shown in the input field. To
accept it, tap
.
If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the city/
town from the list.
205-0010-00_QY-7375M-A_EN.indb 36205-0010-00_QY-7375M-A_EN.indb 363/12/2013 9:57:19 AM3/12/2013 9:57:19 AM

37
5. Instead of entering the street name, tap
. This way the center
of the displayed city/town becomes the
destination of the route.
6. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify
the destination. The Cursor (
)
appears at the new location.
Tap
to confirm the
destination, or tap
to
select a different destination.
7. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Entering an address with a ZIP
code
All of the above address searching
possibilities can be performed with entering
the ZIP code instead of the city/town name.
Find below an example with a full address:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Select the country and state as described
earlier (page 30).
4. Enter a new city/town using its ZIP code:
a. Tap
.b. Tap
to open the numeric keypad.
c. Start entering the ZIP code.
d. Find the city/town you need:
The most likely ZIP code is always
shown in the input field. To accept it,
tap
.
If the desired number does not
show up, open the list of results by
tapping
. Select
the ZIP code from the list.
5. Enter the street name:
a. Tap
.
b. Start entering the street name on the
keyboard.
205-0010-00_QY-7375M-A_EN.indb 37205-0010-00_QY-7375M-A_EN.indb 373/12/2013 9:57:19 AM3/12/2013 9:57:19 AM

40
8. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Searching for a Place of Interest
using preset categories
The Preset search feature lets you quickly find
the most frequently selected types of Places.
1. If you are on the Map screen, tap
to return to the
Navigation menu.2. In the Navigation menu, tap the following
buttons:
,
3. The preset search categories appear:

:
If an active route exists, gas
stations are searched along the
route.
If there is no active route
(destination is not selected), they
are searched around the current
position.

:
If an active route exists, parking
lots are searched around the
destination of the route.
If there is no active route
(destination is not selected), they
are searched around the current
position.
:
If an active route exists, restaurants
are searched along the route.
If there is no active route
(destination is not selected), they
are searched around the current
position.

:
If an active route exists,
accommodation is searched around
the destination of the route.
If there is no active route
(destination is not selected), they
are searched around the current
position.
4. Tap any of the quick search buttons to get
an instant list of Places.
5. (optional) The Places in the list are
ordered by their distance from the
current position, from the destination or
by the length of the necessary detour.
If you need to reorder the list, tap
.
205-0010-00_QY-7375M-A_EN.indb 40205-0010-00_QY-7375M-A_EN.indb 403/12/2013 9:57:20 AM3/12/2013 9:57:20 AM

41
6. Browse the list if necessary and tap one
of the list items. A full screen map appears
with the selected point in the middle.
The name and address of the Place is
displayed at the top of the screen.
7. (optional) Tap
to see the details of
the selected Place. Tap

to return to the map.
8. If necessary, tap the map somewhere
else to modify the destination. The Cursor
(
) appears at the new location.
Tap
to confirm the
destination, or tap
to
select a different destination.
9. After a short summary of the route
parameters, the map appears showing the
entire route.
The route is automatically calculated.
Tap
to modify route
parameters, or tap
and
start your journey.
Searching for a Place of Interest
by category
You can search for Places of Interest by their
categories and subcategories.
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
. .
3. Tap
.
4. Select the area around which the Place
should be searched for:
to search
around the current position. (The result
list will be ordered by the distance from
this position.)

to search for
a place within a selected city/town.
(The result list will be ordered by
the distance from the center of the
selected city/town.)

to search for
a place around the destination of
the active route. (The result list will
be ordered by the distance from the
destination.)

to search along
the active route, and not around a
given point. This is useful when you
search for a later stopover that results
in a minimal detour only, such as
searching for upcoming gas stations
or restaurants. (The result list will be
ordered by the length of the necessary
detour.)
205-0010-00_QY-7375M-A_EN.indb 41205-0010-00_QY-7375M-A_EN.indb 413/12/2013 9:57:20 AM3/12/2013 9:57:20 AM

43
14. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap

to modify route parameters, or tap
and start your journey.
Searching for a Place of Interest
by name
You can search for Places of Interest by their
names. You can search around different
locations or along your route in the whole
Place database or in one Place category or
subcategory only.
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
. .
3. Tap
.
4. Select the area around which the Place
should be searched for:

to search
around the current position. (The result
list will be ordered by the distance from
this position.)

to search for
a place within a selected city/town.
(The result list will be ordered by
the distance from the center of the
selected city/town.)
to search for
a place around the destination of
the active route. (The result list will
be ordered by the distance from the
destination.)

to search along
the active route, and not around a
given point. This is useful when you
search for a later stopover that results
in a minimal detour only, such as
searching for upcoming gas stations
or restaurants. (The result list will be
ordered by the length of the necessary
detour.)
5. (optional) If you have selected
, select the city/town to
search in.
205-0010-00_QY-7375M-A_EN.indb 43205-0010-00_QY-7375M-A_EN.indb 433/12/2013 9:57:20 AM3/12/2013 9:57:20 AM