MITSUBISHI MIRAGE 2014 6.G Owners Manual

Vehicle care and maintenance
7-47
7
Front side-marker lights
N00917300554
1. Turn the socket (A) counterclockwise to remove it.2. Pull the bulb out of the socket.
3. To install the bulb, perform the removal steps in reverse.*- Front of the vehicle
BK0162600US.book 47 ページ ２０１３年３月２２日　金曜日　午後２時４１分

7-48 Vehicle care and maintenance
7
Front turn signal lights
N00943400370
1. Turn the socket (A) counterclockwise to remove it.2. Remove the bulb from the socket by turning it counter-
clockwise while pressing in.
3. To install the bulb, perform the removal steps in reverse.*- Front of the vehicle
BK0162600US.book 48 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Vehicle care and maintenance
7-49
7
Parking lights
N00917300567
1. Turn the socket (A) counterclockwise to remove it.2. Pull the bulb out of the socket.
3. To install the bulb, perform the removal steps in reverse.*- Front of the vehicle
BK0162600US.book 49 ページ ２０１３年３月２２日　金曜日　午後２時４１分

7-50 Vehicle care and maintenance
7
Front fog lights
(if so equipped)
N00943600763
1. To create enough work space, turn the steering wheel all
the way in the direction opposite to the side you wish to
replace.
2. Remove the clips/bolts (A) to turn up the cover (B).3. While pressing the tab (C), pull out the connector (D).
4. Turn the bulb (E) counterclockwise to remove it.
BK0162600US.book 50 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Vehicle care and maintenance
7-51
7
5. To install the bulb, perform the removal steps in reverse.NOTE
When refitting each of the clips, first insert part (F) of the
clip into the hole and then press part (G) into it.
Rear combination lights
N00943700490
1. Open the liftgate.
(Refer to “Liftgate” on page 3-41.)
2. Remove the screws (A) that hold the light unit.
BK0162600US.book 51 ページ ２０１３年３月２２日　金曜日　午後２時４１分

7-52 Vehicle care and maintenance
7
3. Move the light unit toward the rear of the vehicle to unfix
the notch (B) and pin (C).4. Turn the socket counterclockwise to remove it.
D- Back-up light
E- Rear turn signal light
F- Rear side-marker light, and tail and stop light
BK0162600US.book 52 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Vehicle care and maintenance
7-53
7
5. Remove the bulb from the socket by turning it counter-
clockwise while pressing in.6. To install the bulb, perform the removal steps in reverse.
NOTE
When mounting the lamp unit, align the notch (G) and pin
(H) on the lamp unit with the clip (I) and hole (J) in the
body.
BK0162600US.book 53 ページ ２０１３年３月２２日　金曜日　午後２時４１分

7-54 Vehicle care and maintenance
7
License plate light
N00944000403
1. Remove the screws (A) that hold the light unit and remove
the light unit.2. Turn the socket counterclockwise to remove it.
BK0162600US.book 54 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Vehicle care and maintenance
7-55
7
3. Pull the bulb out of the socket.
4. To install the bulb, perform the removal steps in reverse.
Vehicle care precautions
N00945100166
In order to maintain the value of your vehicle, perform regular
maintenance using the proper materials and procedures. Be
sure to use only those materials and procedures that meet your
local environmental pollution control regulations. Choose the
materials you will use carefully, to be sure that they do not con-
tain corrosives. If you are not sure, contact an authorized
Mitsubishi Motors dealer for help in choosing these materials.
CAUTION
!
Cleaning products can be dangerous. Some are poi-
sonous and others are highly flammable. Some are
dangerous if you breathe their fumes in a closed
space. When you use anything in a container to
clean your vehicle, be sure to follow the instructions.
Always open your vehicle doors or windows when
you’re cleaning the inside. Never use the following
chemicals to clean your vehicle:
• Gasoline
• Carbon Tetrachloride
• Benzine
• Kerosene
• Naphtha
• Acetone
• Turpentine
• Paint Thinner
• Lacquer Thinner
• Nail Polish Remover
BK0162600US.book 55 ページ ２０１３年３月２２日　金曜日　午後２時４１分

7-56 Vehicle care and maintenance
7
These can all be dangerous, and they all can damage your vehi-
cle.
Cleaning the inside of your vehicle
N00945200095
After washing the inside of your vehicle with any cleaner, wipe
it dry in a shady, well ventilated area.NOTE
Always read the instructions on the cleaner label.Plastic, vinyl leather, fabric and flocked parts
N00945300142
1. Lightly wipe these off with a soft cloth soaked in a 3%
solution of gentle soap and water.
2. To rinse, dip the cloth in fresh water, wring it out well, and
wipe off all the soap.
CAUTION
!
Do not use organic substances (solvents, benzine,
kerosene, alcohol, gasoline, etc.) or alkaline or acidic
solutions.
These chemicals can cause discoloring, staining or
cracking of the surface.
If you use cleaners or polishing agents, make sure
their ingredients do not include the substances men-
tioned above.
BK0162600US.book 56 ページ ２０１３年３月２２日　金曜日　午後２時４１分