NISSAN NOTE 2016 Service Repair Manual

AV-116
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
USB INTERFACE
USB INTERFACE
Removal and InstallationINFOID:0000000012432981
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation".
2. Release the pawls (A) from the back of the center console assembly (2) using a suitable tool and remove the USB interface
(1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3069ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
AUXILIARY INPUT JACKAV-117
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
AUXILIARY INPUT JACK
Removal and InstallationINFOID:0000000012432982
REMOVAL
1. Remove the center console assembly. Refer to IP-18, "Removal and Installation".
2. Release the pawls (A) from the back of the center console assembly (2) using a suitable tool and remove the auxiliary input
jack (1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3069ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-118
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
REAR VIEW CAMERA
REAR VIEW CAMERA
Removal and InstallationINFOID:0000000012432983
REMOVAL
1. Remove the back door outer finisher. Refer to
EXT-48, "Removal and Installation".
2. Disconnect the harness connector from rear view camera.
3. Remove the nuts (A) from the rear view camera and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3070ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
BLUETOOTH® CONTROL UNITAV-119
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
BLUETOOTH® CONTROL UNIT
Removal and InstallationINFOID:0000000012432984
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the harness connectors from the Bluetooth® control unit.
3. Remove the Bluetooth® antenna screws (A) and the Bluetooth® antenna (1).
4. Remove the Bluetooth® control unit bracket screws (A) and the Bluetooth® control unit (1).
5. Remove the Bluetooth® control unit screws (A) and separate the Bluetooth® control unit (1) from the bracket (2).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
AWNIA3122ZZ
AWNIA3097ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-120
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
BLUETOOTH® ANTENNA
BLUETOOTH® ANTENNA
Removal and Installation INFOID:0000000012432985
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to
INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the Bluetooth® antenna harness connec tor from the Bluetooth® control unit.
3. Remove the Bluetooth® antenna screws (A) and the Bluetooth® antenna (1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
STEERING SWITCHAV-121
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
STEERING SWITCH
Removal and InstallationINFOID:0000000012432986
REMOVAL
Ty p e 1
1. Remove the steering wheel. Refer to ST-8, "Removal and Installation".
2. Remove the steering wheel rear finisher (1) by releasing pawls (A).
3. Remove the steering wheel audio control switch screws (A) from the back of the steering wheel.
4. Remove the steering wheel audio control switches from the steering wheel.
Ty p e 2
The steering switch is an integral part of the driver air bag module. Refer to SR-12, "Removal and Installation".
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3063ZZ
AWNIA3064ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-122
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
MICROPHONE
MICROPHONE
Removal and InstallationINFOID:0000000012432987
REMOVAL
1. Remove the microphone finisher from the headlining by releas-
ing pawls (A) using a suitable tool.
2. Disconnect the harness connector from microphone and remove.
3. Separate the microphone from the finisher by releasing pawls (A) using a suitable tool.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
• Make sure to align the rib on the finisher with the slot in the microphone.
• Make sure to install the microphone with the arro ws pointing toward the RH side of the vehicle.
AWNIA3153ZZ
AWNIA3154ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
ROD ANTENNAAV-123
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
ROD ANTENNA
Exploded ViewINFOID:0000000012432988
Removal and InstallationINFOID:0000000012432989
REMOVAL
1. Lower the rear portion of the headlining. Refer to INT-31, "Removal and Installation".
2. Disconnect the harness connectors from the antenna (satellite radio model shown).
3. Remove the antenna nut (A) and remove the antenna.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
If the antenna nut is tightened l ess than the specified torque this will lower the sensitivity of the
antenna. If the antenna nut is tight ened more than the specified torque this will deform the roof panel.
AWNIA3124ZZ
1. Antenna rod 2. Antenna baseA. Antenna nut
AWNIA3115ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-124
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
ANTENNA FEEDER
ANTENNA FEEDER
Feeder LayoutINFOID:0000000012432990
1. Antenna base (antenna amp. and
satellite antenna) 2. Rod Antenna
3. M351
4. M352 5. M110, M3536. M67, M350
7. M106 8. M105
ALNIA1520ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
SATELLITE RADIO ANTENNAAV-125
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
SATELLITE RADIO ANTENNA
Removal and InstallationINFOID:0000000012432991
The satellite radio antenna is part of the rod antenna. Refer to AV-123, "Removal and Installation".
Revision: August 2015 2016 Versa Note

cardiagn.com