light NISSAN PATHFINDER 2012 R52 / 4.G 06IT Navigation Manual

tions for different sections in [Edit].
. If [Use Time Restricted Roads] is deacti-
vated, the system calculates a route without
any consideration of the regulations con-
cerning the time or day of the week. There-
fore, the suggested route may include a road
subject to traffic regulations concerning the
time or day of the week. When driving along
the route, always follow all traffic regulations
regardless of whether [Use Time Restricted
Roads] is ON or OFF.
. If the system cannot calculate any alternative
routes, it displays the previous route.
. If the vehicle overly deviates from the
suggested route, the system calculates a
new route.
Traffic Information Settings
Allows you to confirm or change the settings for
the traffic information related functions.
Basic operation:
1. Push <ROUTE> .
2. Highlight [Route Settings] and push <ENTER> .
3. Highlight [Detailed Route Settings] and push <ENTER> .
4. Highlight [Traffic Info. Settings] and push <ENTER> .
5. Highlight the preferred condition and push <ENTER> . The indicator for the selected
condition illuminates.
6. When the current location map screen or route setting screen is displayed, the system
recalculates a route with the set conditions.
Available setting items: . Use Traffic Info.:
Enables all traffic information related func-
tions.
. Show Traffic Flow on Map:
Displays the traffic flow with an arrow on the
map screen.
. Show Incidents on Map:
Displays the traffic incidents (e.g., accident)
on the map screen.
. Blink Red Traffic Flow:
Blinks the red traffic flow lines that represent congestions.
. Use Traffic for Travel Time:
Calculates the estimated travel time to
destination taking traffic flow into considera-
tion.
. Use Traffic for Route Calculation:
Allows you to perform the route search with
the traffic information taken into considera-
tion.
When “Auto Reroute” is set, the detour
route search can be performed automati-
cally.
. Traffic Announcements:
This can provide you with the announcement
of the traffic information event on the route.
INFO:
. An XM NavTraffic
®subscription is required
in order to receive Traffic Information.
. Even when “Show Traffic Flow On Map” and
“Show Incidents on Map” are set to off, the
list display of “Info On Route” and “Nearby
Traffic Info” will not be affected.
. Even when “Traffic Announcements” is set
to off, the route guidance will not be
affected. Also, the announcement of emer-
gency information will not be turned off.
Route guidance5-15

Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command.
To turn on/off the traffic information system:
“Traffic Info.” (Alternate command mode)
“Information” “Traffic Info.” (Standard mode)
RECALCULATE ROUTE
You can manually search for the route again after
changing the search condition. When the
vehicle deviates from the suggested route, the
route from the current location to the destination
is automatically searched again.
Re-searching the route manually
1. Push <ROUTE> .
2. Highlight [Recalculate] and push <ENTER> .
3. A message is displayed, and the route is
recalculated.
4. Set the route conditions. After finishing thesetting, highlight [Start] and push
<ENTER> .
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Voice command
1. Push <TALK> located on the steering
switch. 2. After the tone sounds, speak a command.
To recalculate a route:
“Recalculate” (Alternate command mode)
Setting the Auto Reroute
1. Push
<ROUTE> .
2. Highlight [Route Settings] and push <ENTER> .
3. Highlight [Detailed Route Settings] and
push <ENTER> .
5-16Route guidance

4. Highlight [Auto Reroute] and push<ENTER> . The indicator for the selected
condition illuminates. When the current
location map screen or route setting screen
is displayed, the system recalculates a route
with the set conditions.
“Detailed route settings” (page 5-14)
SETTING A DETOUR ROUTE
If you want to detour from the suggested route,
you can calculate a route detouring for a
specified distance.
1. Push <ROUTE> .
2. Highlight [Detour] and push <ENTER>.
3. Highlight a detour distance and push
<ENTER> .
After calculating the detour, the system displays
the detour route on the map.
INFO:
. When the vehicle has deviated from the
suggested route, [Detour] cannot be se- lected.
. If the system cannot calculate a detour with
the specified conditions, it displays the
previous suggested route.
. If the vehicle is traveling very fast, the detour
route may start from a location that the
vehicle has already passed.
Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command.
To set a detour route:
“Detour” (Alternate command mode)
ROUTE GUIDANCE SETTINGS
You can set various guidance information to be
displayed during route guidance and activate or
deactivate route and/or voice guidance.
Route guidance5-17

Basic operation
1. Push<ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight the preferred item and push <ENTER> .
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items
. Guidance Screen Default:
Sets the default display screen for route
guidance.
“Visual guidance settings” (page 5-
18)
. Route Guidance:
Activates or deactivates route guidance.
Route guidance is activated when the
indicator illuminates. Route information is
not available when route guidance is set to
OFF.
. Guidance Voice:
Activates or deactivates voice guidance. The
indicator illuminates if voice guidance is
activated.
. Traffic Info. Settings:
Allows you to apply settings such as performing a route search with traffic
information taken into consideration.
. Estimated Travel Time:
Switches the display of estimated travel time
to the destination or waypoint that is
displayed on the map screen.
. Exit Info. on Turn List:
Sets the information icon displayed in the
turn list to ON/OFF.
. Turning Point Sound:
Sets the guide point sound to ON/OFF.
. Small Turn Arrow on Map:
Activates or deactivates the Small Turn
Arrow on Map (simplified turn indicator)
displayed in the upper left corner of the map
screen. The indicator illuminates if the Small
Turn Arrow on Map is displayed.
. Voice Announcements:
Sets how many times voice guidance is
repeated for guide points.
“Voice guidance settings” (page 5-
21)
. Set Average Speeds:
Allows you to set an average vehicle speed
for each type of road, which is reflected in
the calculation of the required time to the
destination.
“Set average speeds” (page 5-22)
Visual guidance settings
The guidance screen can be displayed at all
times even when the vehicle is located away
from the guide point. You can choose which
screen is to be displayed.
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Guidance Screen Default] and push <ENTER> .
4. The indicator of the selected type of guidance illuminates.
5-18Route guidance

Intersection Map:
The map screen and the enlarged intersection
view can be displayed at the same time.
INFO:
Push <MAP> to switch to the full map screen.
Turn list:
The list screen for showing the guide points to
the destination and the map screen can be
displayed at the same time. An enlarged intersection view is automatically displayed
when the vehicle approaches the guide point.
INFO:
. Turn list can be scrolled using the center dial
or the main directional buttons.
. Push <MAP> to switch to the full map
screen. Push <MAP>again to display the
turn list. When approaching a guide point,
the enlarged view of the intersection is
automatically displayed. To display the turn
list, push <MAP>. To display the map
screen, push <MAP>again.
Map:
The current location map is displayed. An
enlarged intersection view is automatically dis-
played when the vehicle approaches the guide
point.
INFO:
When an enlarged intersection view is dis-
played, you can return to the map screen by
pushing <MAP>.
Switching of required time display
The display of the travel time on the map screen
can be switched between the travel time to the
destination and the travel time to the waypoint.
Example: Switching the display to the travel time
to the waypoint
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Estimated Travel Time] and push <ENTER> .
Route guidance5-19

4. Push the left or right directional buttons toswitch from “Dest.” to “Waypoint”.
5. Push <MAP>to return to the current
location map screen.
6. The icon displayed on the map screen is switched, and the travel time to the waypoint
is displayed.
Displayed icon
: Display of the travel time to thedestination
: Display of the travel time to the
waypoint
Deactivating the information icon display
in the turn list
The display of information icons in the turn list
including the highway exits, junctions, and rest
areas can be deactivated.
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Exit Info. on Turn List] and push <ENTER> to turn off the indicator.
4. Push <MAP>to return to the current
location map screen.
5. The information icon display in the turn list is
now deactivated.
Selecting a waypoint from the turn list:
When [Exit info. on Turn List] is set to on, you
can set a waypoint to a facility located near the
freeway exit.
1. Highlight the exit where the traffic informa- tion icon is displayed, and push <ENTER>.
The category list screen is displayed.
5-20Route guidance

2. Highlight the landmark category and push<ENTER> . The list screen for showing
facilities located near the freeway exit is
displayed.
3. Highlight the preferred facility for the way- point and push <ENTER>.
4. The waypoint is set, and the route search is
performed.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Voice guidance settings
You can set how many times voice guidance is
repeated.
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> . 3. Highlight [Voice Announcements] and push
<ENTER> .
4. Highlight [Twice] or [Three Times] and push
<ENTER> . The indicator for the selected
number of repetitions illuminates.
5. Push <MAP>to return to the current
location map screen.
Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command. . To turn on voice guidance:
“Guidance Voice” (Alternate command
mode)
. To repeat voice guidance once:
“Guidance Voice Repeat” (Alternate com-
mand mode)
Route guidance5-21

Set average speeds
You can calculate the required time to the
destination based on the set vehicle speeds.
Basic operation:
1. Push<ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Set Average Speeds] and push <ENTER> .
4. Highlight the preferred item and push <ENTER> .
5. Use the main directional buttons or the center dial to make an adjustment. The
speed can be increased/decreased by 5
MPH (5 km/h) .
6. After finishing the setting, push <ENTER>
or <BACK> to activate the setting. 7. Push
<BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items: . Auto:
If set to ON, the system automatically
calculates the required time to the destina-
tion, the indicator illuminates and the speed
settings cannot be changed.
. Freeway:
Allows you to adjust the average vehicle
speed on a freeway by moving the main
directional buttons or the center dial in the
direction of [+] or [− ].
. Main Road:
Allows you to adjust the average vehicle
speed on a main road by moving the main
directional buttons or the center dial in the
direction of [+] or [− ].
. Town Road:
Allows you to adjust the average vehicle
speed on a town road by moving the main
directional buttons or the center dial in the
direction of [+] or [− ].
. Residential:
Allows you to adjust the average vehicle
speed in a residential area by moving the
main directional buttons or the center dial in
the direction of [+] or [− ]..
Reset:
Sets the average vehicle speeds to the
default values.
5-22Route guidance

Locations that you often visit can be stored in
the Address Book. The stored locations can be
easily retrieved to set them as a destination or
waypoint.
INFO:
. The Address Book can store up to 200
locations.
. New information placed in the same storage
position will overwrite the old data.
STORING A LOCATION BY SEARCH-
ING
After you have searched for a location as
previously described, you can store the location
for future use.
1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push
<ENTER> .
4. Highlight [Stored Location] and push
<ENTER> .
5. Highlight [Home Location (Add New)] or
[None (Add New)] and push <ENTER>.
6. Highlight the appropriate method to search
for a location and push <ENTER>.
“4. Setting a destination”
STORING A LOCATION
6-2Storing a location/route

7. When your preferred location is displayed atthe center of the map, confirm the location
and push <ENTER> .
A message is displayed, and the location is
stored in the Address Book.
INFO:
.When you store the location from the
Address Book, you cannot use [Address
Book] to search for the location.
.You can adjust a location by selecting
[Move Location] using the same method
as the one for a destination.
“ADJUSTING THE LOCATION
OF THE DESTINATION” (page 4-
25)
8. Adjust the location of the stored item and
edit the contents of the stored item as
necessary. After finishing the setting, high-
light [OK] and push <ENTER>.
STORING THE CURRENT VEHICLE
LOCATION
1. Push<MAP>to display the current loca-
tion map screen.
2. Push <ENTER> at the current vehicle
location.
3. Highlight [Store Location] and push
<ENTER> . A message is displayed, and
the current vehicle location is stored in the
Address Book.
4. Push <MAP>or<BACK> to return to the
current location map screen. The icon
representing the stored location is displayed
on the map.
Storing a location/route6-3