sensor NISSAN PICK-UP 1999 Manual PDF

SRS - See Supplemental Restraint
System ..................................................RS-2004
Start signal ................................................EC-2014
START - Wiring diagram ...........................EL-2012
Starting system ..........................................EL-2012
Steering wheel and column.......................ST-2002
Stop lamp ..................................................EL-2034
STOP/L - Wiring diagram ..........................EL-2034
Striking rod (M/T) ......................................MT-2006
Sub-gear (M/T) .........................................MT-2003
Sunload sensor .........................................HA-2084
Supplemental Restraint System ...............RS-2004
Supplemental restraint system - Wiring
diagram .................................................RS-2020
Swirl control valve control solenoid
valve ......................................................EC-2017
SWL/V - Wiring diagram ...........................EC-2017
Synchronizer (M/T) ...................................MT-2003
T
Tail lamp ....................................................EL-2030
TAIL/L - Wiring diagram ............................EL-2030
Thermal protector......................................HA-2021
Thermo control amp .......................HA-2022, 2073
Thermo switch ................................HA-2022, 2074Tire size......................................................GI-2007
Transmission case (M/T) ................MT-2002, 2005
Tread-FR&RR (Dimensions) ......................GI-2007
Trim ...........................................................BT-2007
Triple pressure switch.....................HA-2022, 2073
Turn signal lamp ........................................EL-2038
V
Vehicle identification number .....................GI-2006
Vehicle speed sensor (VSS).....................EC-2009
VSS - Wiring diagram ...............................EC-2009
W
Warning lamps...........................................EL-2072
Washer, front .............................................EL-2086
Wheel size..................................................GI-2007
Wheelbase (Dimensions) ...........................GI-2007
Width (Dimensions) ....................................GI-2007
WINDOW - Wiring diagram .......................EL-2109
WIPER - Wiring diagram ...........................EL-2086
Wiring diagram (cell code) list ...................EL-2171
ALPHABETICAL INDEX
IDX-2004

Supplemental Restraint System (SRS) ªAIR
BAGº and ªSEAT BELT PRE-TENSIONERº
The Supplemental Restraint System such as ªAIR BAGº and ªSEAT BELT PRE-TENSIONERº used along
with a seat belt, helps to reduce the risk or severity of injury to the driver and front passenger in a frontal
collision. The SRS system composition which is available to NISSAN MODEL D22 is as follows (The com-
position varies according to the destination and optional equipment.):
Driver air bag module (located in the center of the steering wheel), front passenger air bag module (located
on the instrument panel on passenger side), seat belt pre-tensioner, a diagnosis sensor unit, warning lamp,
wiring harness and spiral cable.
Information necessary to service the system safely is included in theRS sectionof this Service Manual.
WARNING:
lTo avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN dealer.
lImproper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and
Air Bag Module, see the RS section.
lDo not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. Spiral Cable and wiring harnesses (except ªSEAT BELT PRE-TENSIONERº) cov-
ered with yellow insulation either just before the harness connectors or for the complete harness
are related to the SRS.
PRECAUTIONS AND PREPARATION
MA-2002

Special Service Tools
Tool number
Tool nameDescriptionUnit appli-
cation
C200
ST3127S000
Preload gauge
V1GG91030000
Torque wrench
V2HT62940000
Socket adapter
V3HT62900000
Socket adapter
NT124
Measuring pinion bearing
preload and total preload
X
KV38108300
Drive pinion flange
wrench
NT771
Removing and installing
propeller shaft lock nut and
drive pinion lock nut
X
ST3090S000
Drive pinion rear inner
race puller set
V1ST30031000
Puller
V2ST30901000
Base
NT527
Removing and installing drive
pinion rear inner cone (All)
Removing rear wheel sensor
rotor (C200)
X
a: 79 mm (3.11 in) dia.
b: 45 mm (1.77 in) dia.
c: 35 mm (1.38 in) dia.
KV38100600
Side bearing spacer drift
NT528
Installing side bearing spacer
X
a: 8 mm (0.31 in)
b: R42.5 mm (1.673 in)
ST30611000
Drift
NT090
Installing pinion rear
bearing outer race
X
ST30621000
Drift
NT073
Installing pinion rear bearing
outer race
X
a: 79 mm (3.11 in) dia.
b: 59 mm (2.32 in) dia.
PREPARATION
PD-2002

Tool number
Tool nameDescriptionUnit appli-
cation
C200
ST30613000
Drift
NT073
Installing pinion front bearing
outer race
X
a: 72 mm (2.83 in) dia.
b: 48 mm (1.89 in) dia.
KV381025S0
Oil seal fitting tool
V1ST30720000
Drift bar
V2KV38102510
Drift
NT525
Installing front oil seal
(R180A, H233B)
Installing rear wheel sensor
rotor (C200)
X
a: 77 mm (3.03 in) dia.
b: 55 mm (2.17 in) dia.
c: 71 mm (2.80 in) dia.
d: 65 mm (2.56 in) dia.
KV38100500
Gear carrier oil seal drift
NT115
Installing front oil seal
X
a: 85 mm (3.35 in) dia.
b: 60 mm (2.36 in) dia.
PREPARATION
Special Service Tools (Cont'd)
PD-2003

6. Place drive pinion bearing spacer, drive pinion bearing
adjusting washer and drive pinion in gear carrier.
7. Insert sensor rotor into companion flange with Tool.
Tool number: ST30720000
8. Install ABS sensor unit on gear carrier.
9. Insert companion flange into drive pinion by tapping the com-
panion flange with a soft hammer.
10. Tighten pinion nut to 127 N´m (13 kg-m, 94 ft-lb).
The threaded portion of drive pinion and pinion nut should
be free from oil or grease.
Tool number: KV38108300
SPD511A
SPD431A
SPD708
SPD512A
ASSEMBLYC200
Differential Carrier (Cont'd)
PD-2009

<SUPPLEMENT-II>
RESTRAINTSYSTEM
SECTION
RS
MODIFICATION NOTICE:
lPassenger air bag has been adopted as optional equipment.
lDiagnosis sensor unit has been changed.
lThe air bag system with a diagnosis sensor unit located in the steering wheel has been deleted.
CONTENTS
PRECAUTION ...................................................... 2002
Supplemental Restraint System (SRS) ``AIR
BAG'' ................................................................ 2002
SEAT BELTS ....................................................... 2003
Precaution for Seat Belt Service ..................... 2003
SUPPLEMENTAL RESTRAINT SYSTEM
(SRS) .................................................................... 2004
Precautions for SRS ``AIR BAG'' and ``SEAT
BELT PRE-TENSIONER'' Service................... 2004
Special Service Tools ...................................... 2004
Commercial Service Tool................................. 2005
Description ....................................................... 2005
SRS Component Parts Location...................... 2006
Maintenance Items........................................... 2006
Removal and Installation - Diagnosis Sensor
Unit ................................................................... 2007
Removal - Driver Air Bag Module and Spiral
Cable ................................................................ 2008 Installation - Driver Air Bag Module and Spiral
Cable ................................................................ 2009
Removal - Front Passenger Air Bag Module .. 2011
Installation - Front Passenger Air Bag
Module ............................................................. 2011
Disposal of Air Bag Module ............................. 2012
TROUBLE DIAGNOSES - Supplemental
Restraint System (SRS) ..................................... 2015
Trouble Diagnoses Introduction ....................... 2015
How to Perform Trouble Diagnoses for Quick
and Accurate Repair ........................................ 2017
Schematic ........................................................ 2019
Wiring Diagram - SRS -/LHD Models .............. 2020
Wiring Diagram - SRS -/RHD Models ............. 2023
Self-diagnosis................................................... 2025
Trouble Diagnoses for Air Bag Warning
Lamp ................................................................ 2037
COLLISION DIAGNOSIS ..................................... 2039
RS

Supplemental Restraint System (SRS) ``AIR
BAG''
The Supplemental Restraint System ``AIR BAG'' used along with a seat belt, helps to reduce the risk or
severity of injury to the driver and front passenger in a frontal collision. The SRS composition which is avail-
able to NISSAN MODEL D22 is as follows (The composition varies according to the destination and optional
equipment.):
Driver air bag module (located in the center of the steering wheel), front passenger air bag module (located
on the instrument panel on passenger side), a diagnosis sensor unit, warning lamp, wiring harness and spi-
ral cable.
WARNING:
lTo avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN dealer.
lImproper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system.
lDo not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. Spiral cable and wiring harnesses covered with yellow insulation either just
before the harness connectors or for the complete harness are related to the SRS.
PRECAUTION
RS-2002

Precautions for SRS ``AIR BAG'' and ``SEAT
BELT PRE-TENSIONER'' Service
lDo not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
lBefore servicing the SRS, turn ignition switch ``OFF'', disconnect both battery cables and wait at least
3 minutes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag to deploy.
Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
lDiagnosis sensor unit must always be installed with their arrow marks ``S'' pointing towards the front of
the vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before
installation and replace as required.
lThe spiral cable must be aligned with the neutral position since its rotations are limited. Do not attempt
to turn steering wheel or column after removal of steering gear.
lHandle air bag module carefully. Always place driver and passenger air bag modules with the pad side
facing upward.
lConduct self-diagnosis to check entire SRS for proper function after replacing any components.
lAfter air bag inflates, the front instrument panel assembly should be replaced if damaged.
Special Service Tools
Tool number
Tool nameDescription
KV99106400
Deployment tool
NT357
Disposing of air bag module
KV99105300
Air bag module bracket
NT354
Anchoring air bag module
HT61961000 and
HT62152000 combined
*Special torx bit
NT361
Use for special bolts
[TAMPER RESISTANT TORX (Size T50)]
a: 3.5 (0.138) dia.
b: 8.5 - 8.6 (0.335 - 0.339) dia.
c: approx. 10 (0.39) sq.
Unit: mm (in)
KV99108300
Deployment tool adapters for
passenger air bag
NT776
*: Special tool or commercial equivalent
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-2004

Commercial Service Tool
Tool name Description Specification
Tamper resistant torx
socket
NT757
Size: T30
Description
The air bag deploys if the diagnosis sensor unit activates while the ignition switch is in the ``ON'' or ``START''
position.
NRS087
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-2005

SRS Component Parts Location
Maintenance Items
CAUTION:
Do not use electrical test equipment to check SRS circuit.
1. Check operation of ``AIR BAG'' warning lamp.
After turning ignition key to ``ON'' position, the warning lamp
illuminates. The ``AIR BAG'' warning lamp will go off after
about 7 seconds if no malfunction is detected. If any of the
following warning lamp conditions occur, immediately check
the air bag system. Refer to RS-2025 for details.
lThe ``AIR BAG'' warning lamp does not illuminate when the
ignition switch is turned ``ON''.
lThe ``AIR BAG'' warning lamp does not go off about 7 sec-
onds after the ignition switch is turned ``ON''.
lThe ``AIR BAG'' warning lamp blinks after about 7 seconds
after the ignition switch is turned ``ON''.
2. Visually check SRS components
(1) Diagnosis sensor unit
lCheck diagnosis sensor unit and bracket for dents, cracks or
deformities.
lCheck connectors for damage, and terminals for deformities.
(2) Air bag module and steering wheel
NRS088
SRS296
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-2006