Peugeot 307 CC 2007.5 Manual PDF

i
62
VISIBILITY
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.

Note: in foggy weather or in snow,
the brightness sensor can detect suf-
i cient light. As a consequence, the
lights will not come on automatically.
Manual "Follow-me-home"
lighting

When the automatic switching on of
the lights function is deactivated , the
side lights and dipped headlamps re-
main on for the duration selected for the
automatic "follow-me-home" lighting.

If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehi-
cle, the side lights and dipped head-
lamps remain on for thirty seconds.
Direction indicators
(l ashers)

Left: downwards.

Right: upwards.

Note: if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow-me-home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the select-
ed duration. Activation:

 switch off the engine,

 "l ash" the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 "l ash" the headlamps again,

 get out of the vehicle and lock it.
To deactivate or activate
this function, go to the mul-
tifunction display coni gura-
tion menu.
The duration of the timed
period must also be set (15, 30,
60 seconds), via the multifunction
display coni guration menu.
Cancelling:

 "l ash" the headlamps,

 get out of the vehicle and lock it. Activation

 Turn ring A to the "AUTO" posi-
tion. The automatic lighting is
accompanied by a message on
the multifunction display.
Deactivation

 Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.

If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction dis-
play.
Contact a PEUGEOT dealer.
Do not cover the brightness sen-
sor, coupled with the rain sensor,
located in the centre of the wind-
screen, behind the interior mir-
ror. It is used for the automatic
switching on of the lights.

i
63
VISIBILITY
For vehicles i tted with halogen
bulbs, depending on the load in your
vehicle, adjusting the beam of your
headlamps is recommended.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 4 people.

-. Intermediate setting.

2. 4 people + maximum
authorised loads.

-. Intermediate setting.

3. Driver + maximum
authorised loads.

Initial setting is position 0. On vehicles with xenon bulbs:

when stationary , the system auto-
matically corrects the height of the
beam, whatever the load of the vehi-
cle. The driver is then assured of hav-
ing optimum lighting and not causing
a nuisance to other road users.

In cases of malfunction ,
the service warning light
comes on on the instrument
panel, accompanied by an
audible signal and a mes-
sage on the multifunction display.
The system places your headlamps
to the low position.
Do not touch the xenon bulbs.
Contact a PEUGEOT dealer.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This warning light comes
on on the instrument panel. THE HEADLAMPS
AUTOMATIC HEADLAMP
ADJUSTMENT
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switch-
ing to the automatic switching on
of the lights mode or when the
lights are switched on manually.
* According to country.

64
VISIBILITY
Special position of the front
windscreen wiper
In the minute following switching off
of the ignition, any action on the stalk
positions the wipers in the centre of
the windscreen.
This action enables you to position
the wiper blades for winter parking,
cleaning or replacement (See section
"Practical information - Changing a
wiper blade").
To park the wipers after this has been
done, switch on the ignition and operate
the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash
then the windscreen wipers operate
for a i xed period.
The headlamp wash is also activated,

if the headlamps are on.

2 Fast wipe (heavy rain).

1 Normal wipe (moderate rain).

I Intermittent wipe.

0 Off.

 Single wipe (press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the vehicle
speed.

2 Fast wipe (heavy rain).

1 Normal wipe (moderate rain).

I Intermittent wipe.

0 Off.

AUTO
 Automatic or single wipe
(press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is
in proportion to the intensity of the
rainfall. The i rst press of the stalk
downwards activates the automatic
wipe.
Subsequent presses trigger a single
wipe.
WINDSCREEN WIPER STALK
Front windscreen wiper with
intermittent wipe Front windscreen wiper with
automatic wipe

i
i
65
VISIBILITY
Automatic windscreen
wipers
In AUTO mode, the windscreen wipers
operate automatically and adapt their
speed to the intensity of the rainfall .
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .

In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in in-
termittent mode.
Contact a PEUGEOT dealer to have
the system checked. In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
COURTESY LIGHTS
1. Front courtesy light

The automatic windscreen
wipers function must be reac-
tivated if the ignition has been
switched off for more than
one minute, by pressing the
stalk downwards. Do not cover the rain sensor lo-
cated on the windscreen behind
the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.

i
i
65
VISIBILITY
Automatic windscreen
wipers
In AUTO mode, the windscreen wipers
operate automatically and adapt their
speed to the intensity of the rainfall .
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .

In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in in-
termittent mode.
Contact a PEUGEOT dealer to have
the system checked. In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
COURTESY LIGHTS
1. Front courtesy light

The automatic windscreen
wipers function must be reac-
tivated if the ignition has been
switched off for more than
one minute, by pressing the
stalk downwards. Do not cover the rain sensor lo-
cated on the windscreen behind
the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.

i
i
65
VISIBILITY
Automatic windscreen
wipers
In AUTO mode, the windscreen wipers
operate automatically and adapt their
speed to the intensity of the rainfall .
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .

In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in in-
termittent mode.
Contact a PEUGEOT dealer to have
the system checked. In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
COURTESY LIGHTS
1. Front courtesy light

The automatic windscreen
wipers function must be reac-
tivated if the ignition has been
switched off for more than
one minute, by pressing the
stalk downwards. Do not cover the rain sensor lo-
cated on the windscreen behind
the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.

66
VISIBILITY
2. Map reading lights Permanently off.
Permanently on.
Different lighting times are available:
- with the ignition off or on, ap- proximately 10 minutes,
- in economy mode, approximately 30 seconds,
- when the engine is running, no limit.
With the ignition on, press
the corresponding switch. Permanently on when the
ignition is on (function not
available in economy mode).
3. Rear courtesy light
In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed. Permanently off.

Note: the front courtesy light (in the
"permanently on" position) forces the
switching on of the rear courtesy light
if the switch is in the central position.
To switch off the rear courtesy light,
place the switch in the "permanently
off" position.

67
LAYOUT

!
68
LAYOUT
INTERIOR LAYOUT
When i tting the mat for the i rst time,
use only the i xings supplied in the
wallet attached.
When removing the mat on the
driver’s side:
- push the seat as far back as possible,
- unscrew the i xings fully,
- remove the i xings, then the mat.
* With colour screen only.
FITTING/REMOVING THE MAT
When rei tting, position the mat
correctly and replace the i xings
by pressing them in.
Ensure that the mat is secured
correctly.
To prevent the mat from becoming
caught under the pedals:
- only use mats which are suited to the i xings already present
in the vehicle. It is imperative
that these i xings are used.
- never i t one mat on top of another.

1. Glove box with cooling facility
This is i tted with a lock.
To open the glove box, lift the
handle.
The glove box lights when the lid is
opened.
It has a ventilation nozzle that
can be closed A , distributing the
same cooled air as the vents of the
passenger compartment.
It contains three sockets * B for
connecting video equipment.
It has a i rst aid kit (according to
country, it may be located in the
boot) and storage compartments for
a pen, the vehicle handbook, a pair
of spectacles, tokens, etc.
2. Front ashtray
Pull the lid to open the ashtray.
To empty it after opening, press the
tab and remove the ashtray.

3. Storage

4. 12 volt socket (100 W max)
This is a lighter type socket, i tted
with a cap.
It is supplied with current from the
running position.

5. Door tray

6. Storage/Can holder

7. Coin storage

8. Waste container
To empty this, open it fully (past the
point of resistance) then pull on the
receptacle to remove it.
To rei t it, lock it in place on the
cover.
This container must not be used as
an ashtray.

9. Front seat back pockets

!
68
LAYOUT
INTERIOR LAYOUT
When i tting the mat for the i rst time,
use only the i xings supplied in the
wallet attached.
When removing the mat on the
driver’s side:
- push the seat as far back as possible,
- unscrew the i xings fully,
- remove the i xings, then the mat.
* With colour screen only.
FITTING/REMOVING THE MAT
When rei tting, position the mat
correctly and replace the i xings
by pressing them in.
Ensure that the mat is secured
correctly.
To prevent the mat from becoming
caught under the pedals:
- only use mats which are suited to the i xings already present
in the vehicle. It is imperative
that these i xings are used.
- never i t one mat on top of another.

1. Glove box with cooling facility
This is i tted with a lock.
To open the glove box, lift the
handle.
The glove box lights when the lid is
opened.
It has a ventilation nozzle that
can be closed A , distributing the
same cooled air as the vents of the
passenger compartment.
It contains three sockets * B for
connecting video equipment.
It has a i rst aid kit (according to
country, it may be located in the
boot) and storage compartments for
a pen, the vehicle handbook, a pair
of spectacles, tokens, etc.
2. Front ashtray
Pull the lid to open the ashtray.
To empty it after opening, press the
tab and remove the ashtray.

3. Storage

4. 12 volt socket (100 W max)
This is a lighter type socket, i tted
with a cap.
It is supplied with current from the
running position.

5. Door tray

6. Storage/Can holder

7. Coin storage

8. Waste container
To empty this, open it fully (past the
point of resistance) then pull on the
receptacle to remove it.
To rei t it, lock it in place on the
cover.
This container must not be used as
an ashtray.

9. Front seat back pockets