Peugeot 407 2009 Owner's Guide

2MULTIFUNCTION DISPLAYS
31
Display confi guration Changing the date and time Set the parameters one by one, using
the navigator, then confi rm by clicking
on "OK" .
From the list displayed, select "Display
confi guration" , then confi rm.
From the list displayed, select "Setting
the date and time" , then confi rm.
- Brightness, to be adjusted in accor-
dance with a scale between Moon
(-) and Sun (+).
-
Selection of the units of measurement.

- Setting the date and time. Your op- erational zone is displayed on the
screen. Use the navigator to move
from one selection to another.
Your new parameters are confi rmed
one by one, by pressing the naviga-
tor button. All of the parameters are
recorded if you click on OK, displayed
on the screen.
The ESCape button on the control pad
enables you to choose not to confi rm
your changes.
- Selection of the colours (on colour display C only). From the menu, displayed on the screen,
select the icon
"Personalisation-
Confi guration" using the navigator, then
confi rm.
For safety reasons, confi gura-
tion of the multifunction dis-
plays by the driver must be
carried out when stationary.

2MULTIFUNCTION DISPLAYS
32
Display
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
Vehicle
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- lighting confi guration,
- comfort lighting.
Units
This menu permits selection of the
units: temperature (°C or °F) and
consumption (km/l, l/100, miles and
mpg).
System
This menu permits restoring of the
factory confi guration, displaying of the
software version and activation of the
scrolling text. For safety reasons, confi gura-
tion of the multifunction dis-
plays by the driver must be
carried out when stationary. COLOUR DISPLAY(WITH PC NAV) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
System language
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
Date & Time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the "Au-
dio and Telematics" section).
This displays the following informa-
tion:
- the time,
- the date,
- the exterior temperature (the value
displayed fl ashes if there is a risk of
ice),
- the accesses check,
- the vehicle function status messag- es, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.

2MULTIFUNCTION DISPLAYS
33
HIGH DEFINITION COLOUR DISPLAY (WITH PC COM)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk of
ice),
- the accesses check,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.
General menu Display confi guration
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Naviga-
tion-Guidance, Map, Traffi c Information,
Audio Functions, Telematics, Confi gura-
tion, Video, Vehicle Diagnostics and Air
Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
Defi ne the vehicle parameters
Permits the activation or deactivation of
certain driving and comfort elements:
- permanent locking of the boot on
the 407 Saloon,
- automatic switching on of the lights,
- automatic "follow-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407 SW.
The "Confi guration" menu provides
access to the following functions:
- Display confi guration,
- Sound,
- Choice of language,
- Defi ne the vehicle parameters.
You can connect video equipment
(camcorder, digital camera, ...) to the
three video sockets, located in the
glove box.
Video display is only possible when
stationary.
Select the Video menu from the general
menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
Press the "ESC" or "DARK" button to
exit from video mode.
Press the "SOURCE" button several
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PC COM)

3COMFORT
34

3COMFORT
35
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the wind-
screen, the vents, the air outlets under
the front seats and the air extractor lo-
cated behind the fl aps in the boot.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient in hot weather), cutting
off the air conditioning permits recov-
ery of the engine power and therefore
improvement of the towing capacity.
Close the windows to benefi t from the
full effectiveness of the air conditioning.
Ensure that the passenger compart-
ment fi lter is in good condition. Have
the fi lter elements replaced periodical-
ly. If you drive in a dusty environment,
replace it twice as often.
The air conditioning system does not
contain chlorine and is not harmful to
the ozone layer.
Operate the air conditioning system for
5 to 10 minutes, once or twice a month,
to keep it in perfect working order.
The water formed by the air conditioning
condensation is discharged via an open-
ing provided for this purpose. Therefore,
a puddle of water may form underneath
the vehicle when stationary. If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.

1. Centre panel vents.

2. Adjustment of the glove box air
fl ow (see section"Interior layout").

3. Air outlet to passenger footwells.

4. Two ventilation vents at the rear
at the base of the centre console
between the passengers.

5. Side vents.

6. Front windows de-icing or demisting
vents.

7. Windscreen de-icing or demisting
vents.

8. Sunshine sensor.

9. Air diffuser grille. AUTOMATIC REGULATION OF THE AIR CONDITIONING
Use of the automatic regulation of
the air conditioning is recommended.
It permits automatic and optimised
control of all of the following functions:
air fl ow, passenger compartment
temperature and air distribution,
by means of various sensors, so
preventing the need for you to change
your reference settings other than the
value displayed.
Air diffuser
The air diffuser grille, located at the
top of the centre console, signifi cantly
improves distribution and fl ows and
prevents air currents, while maintain-
ing an optimum temperature inside the
passenger compartment.
Do not cover the sunshine sensor
8 .
It is required for regulation of the air
conditioning.
Advice on operation
To obtain even ventilation,
avoid closing the air diffuser
grille 9 .
In hot weather, in order to obtain intense
ventilation, you can close the air diffuser
grille and use vents 1 and 5 only.
If, when the vehicle has been parked
in the sun for a long time, the interior
temperature remains very high, do not
hesitate to ventilate the passenger
compartment for a few minutes.

3COMFORT
36
AUTOMATIC AIR CONDITIONING (MONO ZONE)

Mono zone: this is the overall regula-
tion of the temperature, distribution and
fl ow in the passenger compartment.
Control by the Auto programme Automatic
programme -
comfort (1)
Press the "AUTO" button. The indicator
light comes on. The "AUTO" symbol is dis-
played on the multifunction display.
Depending on the level of comfort selected,
the system controls the air distribution, fl ow,
temperature and intake of air in order to
guarantee comfort and an adequate circu-
lation of air in the passenger compartment.
You do not have to make any adjustments.

 Press the right or left
arrow to change it.
Adjustment of the temperature (2)
When the engine is cold, to
prevent too great a distribution
of cold air, the ventilation will
only reach its optimum level
progressively.
The symbols and messages associat-
ed with the automatic air conditioning
controls appear on the multifunction
display.
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit, depending on the choice of
confi guration validated on the display.
A setting around the value 21 makes
it possible to obtain optimum comfort.
However, depending on your require-
ments, a setting between 18 and 24 is
usual.

3COMFORT
37
Control via the manual controls
It is possible to adjust one or more
functions manually, while leaving the
other functions in automatic mode.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not ad-
vantageous (comfort).
To return to automatic mode, press the

"AUTO" button. Blower (3)
Air fl ow

 Turn the dial 3 to the
right to increase the
air fl ow or to the left
to reduce it.
Switching off the ventilation
 Turn the dial 3 to the
left until the fl ow of
air stops. Adjustment of the air
distribution (4)
Successive or continuous pressure on but-
ton
4 enables you to direct the fl ow of air.
The "AUTO" button indicator light is
switched off.
The symbol (arrows) corresponding to
the chosen direction is displayed on
the multifunction display.

 Windscreen and front side windows.

 Front and rear ventilation.

 Front and rear footwells.
AUTO Automatic distribution.
Front visibility
control (5)
In certain cases, the comfort pro-
gramme may not be suffi cient to de-
mist or de-ice the windows (humidity,
several passengers, ice).

 In this case, select the front visi-
bility programme in order to clear
the windows quickly. The indicator
light comes on.
It controls the air conditioning, air fl ow
and intake and distributes the ventila-
tion to the windscreen and front side
windows.
The front visibility control symbol is
displayed on the multifunction display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting.

To reactivate the air conditioning:

 Press button 1 .
On entering the vehicle, the
interior temperature may be
much colder (or warmer) than
is comfortable. There is no
need to change the temperature dis-
played in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air con-
ditioning will use its maximum perform-
ance settings to correct the temperature
difference as quickly as possible. The
"AUTO" button indicator light is
switched off.
The air fl ow symbol (fan) is displayed
on the multifunction display and is fi lled
in in relation to the value required.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
an adequate fl ow of air is maintained.
The "OFF" symbol is displayed on the
multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's func-
tions, with the exception of the rear
screen demisting.
The temperature-related comfort is no
longer controlled (temperature, humi-
dity, odour, condensation).
Avoid driving for too long with the air
conditioning off.

3COMFORT
38
Intake of exterior
air/Recirculation of
interior air (6)
This function enables you to isolate
the passenger compartment from ex-
terior fumes and odours.

 Press button 6 several times to
set the air intake mode, the indica-
tor light which corresponds to the
mode set comes on at your prefe-
rence:
- intake of exterior air. Forced exterior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corres- ponds to the mode set comes on.
Prolonged operation in interior
air recirculation mode may result
in the formation of condensation
and deterioration of the quality of
the interior air.
Do not drive in air recirculation mode for prolonged periods,
except in truly exceptional
atmospheric conditions.
The message associated with the control is displayed on the
multifunction display.

 Press button 6 to return to auto
matic control of the air intake. The
two indicator lights are switched off.

For your comfort, when the igni-
tion is switched off, the settings are
stored until it is switched on again. Rear screen
demisting (7)
The heated rear screen operates inde-
pendently of the air conditioning system.

 Press button 7 , with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting is switched off automatically
to prevent an excessive consumption
of current and in relation to the exterior
temperature.
It may be stopped by pressing button 7
again or when the engine is switched off.
However, demisting resumes if the
engine is switched on again within
one minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.

3COMFORT
39
"AIR CON" menu Press the "MENU" but-
ton to gain access to
the general menu, then
confi rm.
The "General menu" appears on the
multifunction display.
Select the Air Conditioning icon using
the navigator buttons. The
"Air Conditioning" menu ap-
pears on the multifunction display as
the main display.
Deactivation of the air conditioning
(AC-OFF) Additional heating *
Vehicles which are fi tted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
The symbol "AC OFF" is displayed on
the multifunction display.
There is a risk that the temperature
setting value may not be reached and
you risk having condensation on the
windows.
You can cancel the deactivation by
pressing the "AUTO" button on the air
conditioning control panel.
* According to country.

3COMFORT
AUTOMATIC AIR CONDITIONING (DUAL ZONE)

Dual zone: this is the differentiated
regulation of the temperature and air
distribution on the driver's side and the
front passenger side.
The driver and his front passenger
can each adjust the temperature and
the distribution of the air to suit their
requirements.
Control by the Auto programme Automatic
programme - driver
and passenger
comfort (1)
Press the "AUTO" button. The indicator
light comes on. The "AUTO" symbol is
displayed on the multifunction display.
Adjustment of the temperature
on the driver's side (2)
Adjustment of the temperature
on the passenger side (3)

 Press the up or down arrow to
change the temperature on the
driver's side 2 or passenger side 3 .
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit, depending on the choice of
confi guration validated on the display.
A setting around the value 21 makes
it possible to obtain optimum comfort.
However, depending on your require-
ments, a setting between 18 and 24
is usual.
When the engine is cold, to
prevent too great a distribution
of cold air, the ventilation will
only reach its optimum level
progressively.
The symbols and messages associated
with the automatic air conditioning
controls appear on the multifunction
display.
Depending on the level of comfort se-
lected, the system controls the air dis-
tribution, fl ow, temperature and intake
of air in order to guarantee comfort
and an adequate circulation of air in
the passenger compartment. You do
not have to make any adjustments.