heater RENAULT PULSE 2012 1.G Owner's Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
Specification chart (model with type A, B, C, D, E, F audio unit):Supported media CD, CD-R, CD-RW
Supported file \fy\ftem\f ISO\b660 LEVEL1, ISO\b660 LEVEL2, Romeo, Joliet
ISO\b660 Level 3 (packet writing) i\f not \fupported.
File\f \faved u\fing the Live File Sy\ftem component (on a Window\f Vi\fta-ba\fed computer)
are not \fupported.
Supported ver\fion\f*1 MP3
Ver\fion
MPEG1, MPEG2, MPEG2.5
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbp\f - 320 kbp\f, VBR*4
WMA*3 Ver\fion
WMA7, WMA8, WMA\b
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbp\f - 1\b2 kbp\f, VBR*4
Tag information (Song title and Arti\ft name) ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
WMA tag (WMA only)
Folder level\f Folder level\f: 8, Folder\f: 255 (including route folder) , File\f: 512 (Max. 255 file\f for one
folder)
Di\fplayable character code\f*2 01: ASCII, 02: ISO-885\b-1, 03: UNICODE (UTF-16 BOM Big Endian) , 04: UNICODE
(UTF-16 Non-BOM Big Endian) , 05: UNICODE (UTF-8) , 06: UNICODE (Non-UTF-16
BOM Little Endian)
*1 File\f created with a combination of 48 kHz \fampling frequency and 64 kbp\f bit rate cannot be played.
*2 Available code\f depend on what kind of media, ver\fion\f and information are going to be di\fplayed.
*3 Protected WMA file\f (DRM) cannot be played.
*4 When VBR file\f are played, the playback time may not be di\fplayed correctly. WMA7 and WMA8 are not applied to VBR.
Heater and air conditioner, and audio system4-11
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-12Heater and air conditioner, and audio system
Specification chart (model with type G audio unit):Supported media CD, CD-R, CD-R\f, USB2.\b
Supported file systems CD, CD-R, CD-R\f: ISO966\b LEVEL1, ISO966\b LEVEL2, Romeo, Joliet
* ISO966\b Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a \findows Vista-based computer) are
not supported.
USB memory device: FAT16, FAT32
Supported versions*1 MP3
Version
MPEG1 Audio Layer 3
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbps - 32\b kbps, VBR*4
\fMA*2 Version
\fMA7, \fMA8, \fMA9
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbps - 192 kbps, VBR*4
Tag information (Song title and Artist name) ID3 tag VER1.\b, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
\fMA tag (\fMA only)
Folder levels CD, CD-R, CD-R\f
Folder levels: 8, Folders and files: 999 (Max. 255 files for one folder)
USB Folder levels: 8, Folders 255, Files: 25\b\b (Max. 255 files for one folder)
Memory size: 4GB
Displayable character codes*3 \b1: ASCII, \b2: ISO-8859-1, \b3: UNICODE (UTF-16 BOM Big Endian) , \b4: UNICODE (UTF-16
Non-BOM Big Endian) , \b5: UNICODE (UTF-8) , \b6: UNICODE (Non-UTF-16 BOM Little
Endian) , \b7: SHIFT-JIS
*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.
*2 Protected \fMA files (DRM) cannot be played.
*3 Available codes depend on what kind of media, versions and information are going to be displayed.
*4 \fhen VBR files are played, the playback time may not be displayed correctly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Troubleshooting guide (model with type A, B, C, D, E, F audio unit):Symptom Cause and Countermeasure
Cannot play Check i\f the disc was inserted correctly.
Check i\f the disc is scratched or dirty.
Check i\f there is condensation inside the player, and i\f there is, wait until the condensation is \bone (about 1 hour) be\fore usin\b the
player.
I\f there is a temperature increase error, the CD player will play correctly a\fter it returns to the normal temperature.
I\f there is a mixture o\f music CD \files (CD-DA data) , MP3/WMA \files on a CD, only the music CD \files (CD-DA data) will be played.
Files with extensions other than “.MP3”, “.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number o\f
characters \for \folder names and \file names should be in compliance with the speci\fications.
Check i\f the disc or the \file is \benerated in an irre\bular \format. This may occur dependin\b on the variation or the settin\b o\f MP3/WMA
writin\b applications or other text editin\b applications.
Check i\f the \finalization process, such as session close and disc close, is done \for the disc.
Check i\f the disc is protected by copyri\bht.
Poor sound quality Check i\f the disc is scratched or dirty.
It takes a relatively lon\b time be\fore
the music starts playin\b. I\f there are many \folder or \file levels on the MP3/WMA disc, or i\f it is a multisession disc, some time may be required be\fore the music
starts playin\b.
Music cuts o\f\f or skips The writin\b so\ftware and hardware combination mi\bht not match, or the writin\b speed, writin\b depth, writin\b width, etc., mi\bht not
match the speci\fications. Try usin\b the slowest writin\b speed.
Skippin\b with hi\bh bit rate \files Skippin\b may occur with lar\be quantities o\f data, such as \for hi\bh bit rate data.
Move immediately to the next son\b
when playin\b. When a non-MP3/WMA \file has been \biven an extension o\f “.MP3”, “.WMA”, “.mp3, “.wma”, or when play is prohibited by copyri\bht
protection, there will be approximately 5 seconds o\f no sound and then the player will skip to the next son\b.
The son\bs do not play back in the
desired order. The playback order is the order in which the \files were written by the writin\b so\ftware, so the \files mi\bht not play in the desired order.
Heater and air conditioner, and audio system4-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-14Heater and air conditioner, and audio system
Troubleshooting guide (model with type G audio unit):Symptom Cause and Countermeasure
Cannot play Che\fk if the dis\f or \bSB memory devi\fe was inserted \forre\ftly.
Che\fk if the dis\f is s\frat\fhed or dirty.
Che\fk if there is \fondensation inside the player, and if there is, wait until the \fondensation is gone (about 1 hour) before
using the player.
If there is a temperature in\frease error, the player will play \forre\ftly after it returns to the normal temperature.
If there is a mixture of musi\f CD files (CD-DA data) and \fompressed audio files on a CD, only the musi\f CD files (CD-DA
data) will be played.
Files with extensions other than “.MP3 (.mp3)” or “.WMA (.wma)” \fannot be played. In addition, the \fhara\fter \fodes and
number of \fhara\fters for folder names and file names should be in \fomplian\fe with the spe\fifi\fations.
Che\fk if the dis\f or the file is generated in an irregular format. This may o\f\fur depending on the variation or the setting of
\fompressed audio writing appli\fations or other text editing appli\fations.
Che\fk if the finalization pro\fess, su\fh as session \flose and dis\f \flose, is done for the dis\f.
Che\fk if the dis\f or \bSB memory devi\fe is prote\fted by \fopyright.
Poor sound quality Che\fk if the dis\f is s\frat\fhed or dirty.
It takes a relatively long time before the musi\f
starts playing. If there are many folder or file levels on the dis\f or \bSB memory devi\fe, some time may be required before the musi\f
starts playing.
Musi\f \futs off or skips The writing software and hardware \fombination might not mat\fh, or the writing speed, writing depth, writing width, et\f.,
might not mat\fh the spe\fifi\fations. Try using the slowest writing speed.
Skipping with high bit rate files Skipping may o\f\fur with large quantities of data, su\fh as for high bit rate data.
Move immediately to the next song when playing. If an unsupported \fompressed audio file has been given a supported extension like .MP3, or when play is prohibited by
\fopyright prote\ftion, the player will skip to the next song.
The songs do not play ba\fk in the desired order. The playba\fk order is the order in whi\fh the files were written by the writing software, so the files might not play in the
desired order.
Random/Shuffle may be a\ftive on the audio system or on a \bSB memory devi\fe.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
ANTENNA (if equipped)
SAA0611
Adjus\f \fhe an\fenna an\ble for \fhe bes\f recep\fion.
Removin\b an\fenna
You can remove \fhe an\fenna if necessary.
Hold \fhe bo\f\fom of \fhe an\fenna and remove by \furnin\b
coun\ferclockwise.
To ins\fall \fhe an\fenna, \furn \fhe an\fenna clockwise and
\fi\bh\fen.
CAUTION:
.Be sure to fold down the antenna before the
vehicle enters a garage with a low ceiling.
. Be sure that antenna is removed before the
vehicle enters an automatic car wash.
Heater and air conditioner, and audio system4-15
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-16Heater and air conditioner, and audio system
FM-AM RADIO WITH COMPACT DISC (CD) P\fAYER (Ty\be A)
SAA3122
1. MUTE button
2. FM radio band select button
3. AM radio band select button
4. CD button
5. AUX button
6. CD EJECT button
7. MENU button
8. SEEK/TRACK button9. TUNE/FF (Forward)·REW (Rewind)/FO\fDER
button
10. SCAN button
11. RDM (Random) button
12. Power button/VO\f (Volume) control knob
13. AUX IN (auxiliary in\but) jack
14. RPT (Re\beat) button
15. AUTO.P (Automatic Preset) button 16. Radio memory buttons (1 - 6)
17. DISP (Dis\blay) button
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the Power button.
Volume control:
To control the volume, turn the VOL control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
MENU button:
To change the audio settings (BASS, TREBLE,
FADER, BALA\bCE, BEEP and CLOCK) , push the
button to select the mode while the CD or radio is
on.
Push the
button until the desired mode appears
on the display.
BASS ?TREBLE ?FADE ?BALA\bCE ?BEEP
O\b ?CLOCK
Audio setting
Push the SEEK/TRACK button (
or) or
TU\bE/FF·REW/FOLDER button (or) to
adjust while the following audio setting is displayed.
:( í) to decrease / (+) to increase
:(í) to decrease / (+) to increase
: (F) to front fade / (R) to rear fade
: (R) to right balance / (L) to left balance
Once the audio settings are set to the desired level,
push the
button until the radio or CD display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
Beep setting
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired mode
is displayed. This turns on or off the beep sound when
audio buttons are pushed.
Clock setting
To display the clock on the screen, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonorto select CLOCK O\b.
1. Turn the clock display on.
2. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
3. To adjust the hours, push the SEEK/TRACK button
or.
4. To adjust the minutes, push the TU\bE/FF·REW/ FOLDER button
or.
If no user input is detected for 10 seconds, or when
the \fME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
SAA3123
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
When the
button is pushed while a CD with a title
is being played, the display will change as follows:
Heater and air conditioner, and audio system4-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-18Heater and air conditioner, and audio system
CD:
CD with MP3 or WMA:
SEEK/TRACK button:
Whe\f the
butto\f is \bushed while a CD is bei\fg
\blayed, the \brese\ft track will be adva\fced a\fd move to
the \fext track. Push the
butto\f several times to
ski\b forward tracks. The CD will adva\fce the \fumber
of times the butto\f is \bushed. Whe\f the last track of
the CD is forwarded, the first track will be \blayed.
Whe\f the
butto\f is \bushed while a CD is bei\fg
\blayed, the \brese\ft track will start over from the
begi\f\fi\fg of the curre\ft track. Push the
butto\f
several times to ski\b back tracks. The CD will rewi\fd
the \fumber of times the butto\f is \bushed. Whe\f the
first track of the CD is rewou\fd, the last track will be
\blayed.
TUNE/FF·REW/FOLDER button:
Whe\f the
orbutto\f is \bushed a\fd held while
a CD is bei\fg \blayed, the CD will be \blayed while
forwardi\fg or rewi\fdi\fg. Whe\f the butto\f is released,
the CD will retur\f to the \formal \blay s\beed.
Whe\f the
orbutto\f is \bushed while a CD
with MP3 or WMA is bei\fg \blayed, the first track i\f the
\fext or the \brevious folder will be \blayed.
button:
Whe\f the
butto\f is \bushed while a CD is bei\fg
\blayed, the first 10 seco\fds of all the tracks will be
\blayed.
Whe\f the
butto\f is \bushed agai\f, the CD will
retur\f to \formal \blay from the track which is \blayi\fg.
(Repeat) button:
To cha\fge the \blay setti\fgs, \bush the
butto\f to
select the mode.
CD:
RPT DISC ?RPT TRACK
CD with MP3 or WMA:
RPT DISC ?RPT FOLDER ?RPT TRACK
RPT DISC:
All the tracks of the CD will be \blayed co\fti\fuously i\f
seque\ftial order. The dis\blay i\fdicates \fo symbol
mark. While the
butto\f is \bushed, the dis\blay
i\fdicates “RPT DISC”.
RPT TRACK:
The selected track of the CD will be \blayed co\f-
ti\fuously. While the
butto\f is \bushed, the dis\blay
i\fdicates “RPT TRACK”.
RPT FOLDER:
All the tracks of selected folder will be \blayed
co\fti\fuously i\f seque\ftial order (CD with MP3 or
WMA o\fly) . While the
butto\f is \bushed, the
dis\blay i\fdicates “RPT FOLDER”.
(Random) button:
To cha\fge the \blay seque\fce, \bush the
butto\f to
select the mode.
CD:
RDM DISC ?RPT DISC
CD with MP3 or WMA:
RDM DISC ?RDM FOLDER ?RPT DISC
RPT DISC:
All the tracks of the CD will be \blayed co\fti\fuously i\f
seque\ftial order. The dis\blay i\fdicates \fo symbol
mark. While the
butto\f is \bushed, the dis\blay
i\fdicates “RPT DISC”.
RDM DISC:
All the tracks or folders (CD with MP3 or WMA o\fly) of
the CD will be \blayed co\fti\fuously i\f ra\fdom order.
While the
butto\f is \bushed, the dis\blay i\fdicates
“RDM DISC”.
RDM FOLDER:
All the tracks of the selected folder will be \blayed
co\fti\fuously i\f ra\fdom order (CD with MP3 or WMA
o\fly) . While the
butto\f is \bushed, the dis\blay
i\fdicates “RDM FOLDER”.
MUTE button:
Press the
butto\f to \bause the track.
CD EJECT button:
To eject a CD, \bush the CD EJECT
butto\f.
Whe\f the
butto\f is \bushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease.
If a CD is ejected by \bushi\fg the
butto\f, a\fd it is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
not taken out from the loading slot, the CD \fill
automatically be reloaded to the slot to \brotect the CD
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio in\but jack acce\bts any standard analog audio
in\but such as from a \bortable cassette ta\be, CD \blayer,
MP3 \blayer or la\bto\b com\buters.
Push the AUX button to \blay a com\batible device \fhen
it is \blugged into the AUX IN jack.
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display. .
For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio o\beration
SAA3123
The audio system o\berates \fhen the ignition s\fitch is
in the “ACC” or “ON” \bosition.
/button:
When the
/button is \bushed \fhile the audio
system is off, the audio system \fill turn on and the
radio \fill turn on.
When the
/button is \bushed \fhile another
audio source is \blaying, the another audio source \fill
turn off and the radio \fill turn on.
To change the radio bands, \bush the
/button
until the desired band (FM1, FM2, AM) is dis\blayed.
The FM stereo indicator, “ST” \fill dis\blay during FM
stereo rece\btion. When the stereo broadcast signal is
\feak, the radio \fill automatically change from stereo
to monaural rece\btion.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequency
manually, \bush the
orbutton until the desired
frequency is achieved.
When adjusting the broadcasting station frequency
automatically, \bush the
orbutton. When the
system detects a broadcasting station, it \fill sto\b at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequency
automatically, \bush the
button. When the
system detects a broadcasting station, it \fill sto\b at
the station.
button:
When the
button is \bushed, the system \fill seek
and sto\b at the detected broadcasting station for 5
seconds, and then it \fill start to seek for the next
broadcasting station.
Push the
button in this 5-second \beriod to sto\b
seeking.
Radio memory button:
The audio system can store u\b to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre- quency by using the
orbutton.
2. Push and hold a memory button (1 - 6) until a bee\b sounds.
Heater and air conditioner, and audio system4-19
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-20Heater and air conditioner, and audio system
3. The switch number \fnd frequenc\b will \fppe\fr onthe displ\f\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for \fll other memor\b buttons.
Push \f memor\b button (1 - 6) to select \f desired
memor\b.
If the b\ftter\b c\fble is disconnected, or if the \fudio fuse
blows, the r\fdio memor\b will be er\fsed. In such \f c\fse,
reset the desired st\ftions.
(Automatic Preset) button:
The \fudio s\bstem c\fn store up to 6 FM st\ftion
frequencies \fnd 6 AM st\ftion frequencies.
To store the st\ftion frequenc\b \futom\ftic\fll\b, push \fnd
hold the
button until \f beep sounds. The st\ftion
will be \futom\ftic\fll\b stored in the “AUTO.P” memor\b.
The displ\f\b indic\ftes “AP-**”.
Push the
button to select \f desired memor\b.
MUTE button:
Press the
button to mute the sound. Press \fg\fin
to restore the sound.
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (T\bpe B)
JVH0060X
1. MUTE button
2. FM r\fdio b\fnd select button
3. AM r\fdio b\fnd select button
4. CD button
5. AUX button
6. CD EJECT button
7. Sound preference button
8. SEEK/TRACK button 9. TUNE/FF (Forw\frd)·REW (Rewind)/FOLDER
button
10. SCAN button
11. RDM (R\fndom) button
12. Power button/VOL (Volume) control knob
13. AUX IN (\fuxili\fr\b input) j\fck
14. RPT (Repe\ft) button
15. AUTO.P (Autom\ftic Preset) button
&RQGLWLRQ