SAAB 9-5 2006 Owners Manual
Page 221 of 288
221 Car care and technical information
Fuse panel in instrument panel
# Amp Function 
A 30 Trailer lights 
B 10 Automatic transmission 
C  7.5 Electric door mirrors; DICE: manual beam length 
adjustment
1 15 Brake lights; Park Brake Shift Lock (cars with auto-
matic transmission)
2 15 Reversing lights 
3 10 Parking lights and taillights, left 
4 10 Parking lights and taillights, right 
5 7.5 DICE / TWICE 
6 30 Electric windows, right; trailer charging
6B 7.5 Brake lights, trailer 
7 10 Engine injectors 
8 15 Trunk lighting; trunk lock; door lighting; parking 
assistant; SID
9 15 Audio System; CD changer
10 15 Heating, rear seat; moonroof, remote control 
receiver
11 30 Electrically adjusted passenger seat
12 7.5 Automatic transmission
13 20 Audio System, amplifier 
14 30 Ignition system, engine 
15 20 Fuel pump
16 20 DICE (direction indicators)
16B – OnStar
17 20 Engine-management system; main instrument; 
DICE/TWICE
18 40 Door-mirror heating; rear-window heating
19 10 OnStar; Telematics
20 15 ACC; interior lighting; rear fog light; high beam flasher
21 10 Audio System; rear-view mirror; load angle sensor; 
navigation; Cruise Control
22 40 Interior fan
23 15 Central locking; navigation; door mirror memory
24 20 Main light switch
25 30 Electrically adjustable driver’s seat
IB2439
BC123456 A
14
121110987
13
6B
1516
2324
222120191817
16B25262728293031
3635343332
393837
95usM06.book  Page 221  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 222 of 288
222 Car care and technical information
Relay panel under instrument panel 
26 7,5 Driver seat memory; mirrors memory; 
moonroof; parking assistant; seatbelt reminder; 
ACC
27 10 Engine-management system; SID; main instrument
28 7.5 Airbag
29 7.5 ABS/ESP
30 7.5 Starter motor; transmission control module (cars with 
automatic transmission)
31 7.5 Cruise control; water valve; fog lights, front; rain 
sensor
32 – –
33 7.5 Direction-indicator switch 
34 30 12-volt socket (cigarette lighter) front/rear
35 15 Daytime running light 
36 30 Electric windows, left 
37 30 Windshield wipers
38 30 Electric heating, front seats
39 20 Limp-home solenoid
# Function 
A –
B  Electric heating of rear seat 
C1 –
C2 –
D–
E Main relay (engine management system)
F–
G Fuel pump
H Ignition switch
I Rear-window / door mirrors heating
IB3916
A
BC1
C2
L2 L1 D
GE
F
H
I
K J
95usM06.book  Page 222  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 223 of 288
223 Car care and technical information
Fuse box under hoodFuses J–
KStarter relay
L1 Limp-home function
L2 –
# Amp Function 
1 40 Radiator fan, high speed
2 40 ABS/ESP
3 30 ABS/ESP
4 7.5 Load angle sensor (cars with xenon headlights)
515Heater 
6 10 A/C; car alarm siren 
715Bulb test
8–– 
9 20 Headlight washers
43
2
IB1797
2 1
14 1312 7 6
5 1
15 168
11
10 9
178 5
17 14 11 7 4
16 13 69
10 3
15 12
95usM06.book  Page 223  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 224 of 288
224 Car care and technical information
Relays
10 15 High beam headlight, left 
11 15 Low beam headlight left 
12 15 High beam headlight, right
13 15 Low beam headlight, right
14 30 Radiator fan, high speed
15 15 Fog lights (front spoiler)
16 20 Wiper, rear
17 15 Horn
18 – –
# Function 
1 Bulb test; head light; high beam flasher
2 Headlight washer 
3 Front fog lights 
4 Wiper, rear (9-5 SportCombi)
5–
6–
7 Rain sensor
8 Radiator fan, low speed
9 Radiator fan, high speed
10 A/C-compressor 
11 Radiator fan, high speed, right fan
12 Horn 
13 Extra lights (accessory) 
14 High beam headlight
15 Low beam headlight 
16 –
17 Windshield wipers
95usM06.book  Page 224  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 225 of 288
225 Car care and technical information
Tires Your new vehicle comes with high-quality 
tires made by a leading tire manufacturer. If 
you ever have questions about your tire 
warranty and where to obtain service, see 
your Saab Warranty and Service Record 
Booklet for details.
Inflation - Tire PressureThe Tire-Loading Information label shows 
the correct inflation pressures for your tires 
when they’re cold. “Cold” means your vehi-
cle has been sitting for at least three hours 
or driven no more than 1 mile (1.6 km).
Notice: Don’t let anyone tell you that 
underinflation or overinflation is all 
right. It’s not. If your tires don’t have 
enough air (underinflation), you can get 
the following:
 Too much flexing
 Too much heat
 Tire overloading
 Bad wear
 Bad handling
 Bad fuel economy
If your tires have too much air (overinfla-
tion), you can get the following:
 Unusual wear
 Bad handling
 Rough ride
Needless damage from road hazardsAdjust the tire pressure to match the current 
load and speed of the car (see page 269). 
The stated tire pressures apply to cold tires, 
i.e. tires that are the same temperature as 
the outside air temperature. Tire pressure 
increases as the tires become warm (e.g. 
during highway driving) by approximately 
0.3 bar (4 psi). When the temperature of the 
tires changes by 50°F (10°C), the tire pres-
sure will change 0.1 bar (2 psi).
Never reduce the pressure of a hot tire. If the 
tires are hot when you check them, only 
increase the pressure, if necessary.
WARNING
Poorly maintained and improperly used 
tires are dangerous.
 Overloading your tires can cause 
overheating as a result of too much 
friction. You could have an blow-out 
and a serious accident. See “Loading 
Your Vehicle” on page 234.
 Underinflated tires pose the same 
danger as overloaded tires. The 
resulting accident could cause serious 
injury. Check all tires frequently to 
maintain the recommended pressure. 
Tire pressure should be checked 
when your tires are cold.
 Overinflated tires are more likely to be 
cut, punctured or broken by a sudden 
impact – such as when you hit a pot-
hole. Keep tires at the recommended 
pressure.
 Worn, old tires can cause accidents. If 
your tread is badly worn, or if your tires 
have been damaged, replace them.95usM06.book  Page 225  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 226 of 288
226 Car care and technical informationHigh speed operationWhen to check
Check your tires once a month or more.
Don’t forget your compact spare tire. It 
should be at 60 psi (420 kPa).How to CheckUse a good quality pocket-type gauge to 
check tire pressure. You can’t tell if your 
tires are properly inflated simply by looking 
at them. Radial tires may look properly 
inflated even when they’re underinflated.
Be sure to put the valve caps back on the 
valve stems. They help prevent leaks by 
keeping out dirt and moisture.Tire Inspection and RotationTires should be rotated every 10,000 miles 
(16 000 km).
Any time you notice unusual wear, rotate 
your tires as soon as possible and check 
wheel alignment. Also check for damaged 
tires or wheels. See “When It Is Time for 
New Tires” on page 227 and “Wheel 
Replacement” on page 230 for more infor-
mation.
The purpose of regular rotation is to achieve 
more uniform wear for all tires on the vehi-
cle. The first rotation is the most important.
When rotating your tires, always use the 
correct rotation pattern. Left front tire to left 
rear. Left rear tire to right front. Right front to 
right rear. Right rear to left front.
Don’t include the compact spare tire in your 
tire rotation.After the tires have been rotated, adjust the 
front and rear inflation pressures as shown 
on the Tire-Loading Information label. Make 
certain that all wheel nuts are properly tight-
ened. See page 241.
WARNING
Driving at high speeds, 100 mph 
(160 km/h) or higher, puts an additional 
strain on tires.
Sustained high-speed driving causes 
excessive heat build up and can cause 
sudden tire failure. You could have a 
crash and you or others could be killed. 
Some high-speed rated tires require infla-
tion pressure adjustment for high speed 
operation. When speed limits and road 
conditions are such that a vehicle can be 
driven at high speeds, make sure the tires 
are rated for high speed operation, in 
excellent condition, and set to the correct 
cold tire inflation pressure for the vehicle 
load.
WARNING
Rust or dirt on a wheel, or on the parts to 
which it is fastened, can make wheel nuts 
become loose after a time. The wheel 
could come off and cause an accident. 
When you change a wheel, remove any 
rust or dirt from places where the wheel 
attaches to the vehicle. In an emergency, 
you can use a cloth or a paper towel to do 
this; but be sure to use a scraper or wire 
brush later, if you need to, to get all the 
rust or dirt off. See “Changing a wheel” on 
page 239.
95usM06.book  Page 226  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 227 of 288
227 Car care and technical information
Flat spottingAll tires get hot, especially on long journeys 
or when the car is driven hard. After the car 
has been parked with hot tires and the tires 
have cooled down, a flat spot can form in the 
tire, where it is in contact with the ground. 
The same can occur if the car has not been 
moved for a long time.
Flat spots can cause vibration that can be 
felt through the steering wheel, similar to 
that experienced when the wheels need bal-
ancing.
Flat spots of this type disappear once the 
tires get hot again, usually after 10–15 miles 
(20–25 km) of driving at cruising speed.
When It Is Time for New TiresOne way to tell when it’s time for new tires is 
to check the treadwear indicators, which will 
appear when your tires have only 1/16 inch 
(1.6 mm) or less of tread remaining.
You need a new tire if any of the following 
statements are true:
 You can see the indicators at three or 
more places around the tire.
 You can see cord or fabric showing 
through the tire’s rubber.
 The tread or sidewall is cracked, cut or 
snagged deep enough to show cord or 
fabric.
 The tire has a bump, bulge or split.
 The tire has a puncture, cut or other 
damage that can’t be repaired well 
because of the size or location of the 
damage.
Treadwear indicatorsThe tires incorporate wear indicators in the 
form of smooth, treadless strips across the 
width, which become visible when only 
2/32" (1.6 mm) of tread remains. As soon as 
the indicators become visible, new tires 
should be fitted without delay.
Make sure you are familiar with the legal 
limit for minimum tread depth in your 
country and also any regulations gov-
erning the use of winter (snow) tires.
SG840
Wear indicators 
95usM06.book  Page 227  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 228 of 288
228 Car care and technical informationBuying New TiresTo find out what kind and size of tires you 
need, look at the Tire-Loading Information 
label.
If you wish to fit other tires or wheels than 
those supplied with the car, consult your 
Saab dealer first as to the possibilities 
available.
Wheels/tires combinations that are not 
approved by the vehicle manufacturer can 
negatively affect the car’s directional stabil-
ity, steering and braking in both wet and dry 
conditions.
The wheels and tires have been carefully 
matched to the characteristics of the car and 
play a key role in its outstanding roadhold-
ing and handling.
Do not take it for granted that a wheel/tire 
combination will work in the best possible 
way, just because it can be fitted to the car.
To ensure that the speedometer is as accu-
rate as possible it should be reprogrammed 
if wheels of a different dimension are fitted. 
Contact a Saab dealer.
Because of front wheel drive, the front tires 
tend to wear faster than the rear ones. New 
tires should always be fitted in pairs, so that 
tires on the same axle have the same 
amount of tread. 
Store wheels lying flat or hanging – never 
standing upright.
NOTICEAlways consult your Saab dealer before 
changing the wheels and tires on your 
Saab.
Wide wheels and tires with sidewalls that 
are too low can:
 be damaged in potholes etc.
 cause springs, shock absorbers and 
wheel bearings and body mountings 
can be overloaded.
 cause the wheels to come into contact 
with chassis and body components.
 can affect the function of the Elec-
tronic Stability Program (ESP).
The speed and load limits for the tires 
must not be exceeded; see page 233.
Wheels larger than 17” must not be fitted. 
The maximum permissible offset is 
49 mm.
WARNING
Mixing tires could cause you to lose con-
trol while driving. If you mix tires of differ-
ent sizes or types (radial and bias-belted 
tires), the vehicle may not handle prop-
erly, and you could have a crash. Using 
tires of different sizes may also cause 
damage to your vehicle. Be sure to use 
the same size and type tires on all wheels. 
It’s all right to drive with your compact 
spare temporarily, it was developed for 
use on your vehicle. See “Compact spare 
tire” on page 237.
WARNING
If you use bias-ply tires on your vehicle, 
the wheel rim flanges could develop 
cracks after many miles of driving. A tire 
and/or wheel could fail suddenly, causing 
a crash. Use only radial-ply tires with the 
wheels on your vehicle.
95usM06.book  Page 228  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 229 of 288
229 Car care and technical information
Uniform Tire Quality GradingQuality grades can be found where applica-
ble on the tire sidewall between tread shoul-
der and maximum section width. For exam-
ple:
Treadwear 200 Traction AA 
Temperature A
The following information relates to the 
system developed by the United States 
National Highway Traffic Safety Administra-
tion, which grades tires by treadwear, trac-
tion and temperature performance. (This 
applies only to vehicles sold in the United 
States.) The grades are molded on the side-
walls of most passenger car tires. The Uni-
form Tire Quality Grading system does not 
apply to deep tread, winter-type snow tires, 
space-saver or temporary use spare tires, 
tires with nominal rim diameters of 10 to 12 
inches (25 to 30 cm), or to some limited-pro-
duction tires.
While the tires available on General Motors 
passenger cars and light trucks may vary 
with respect to these grades, they must also 
conform to federal safety requirements and 
additional General Motors Tire Perfor-
mance Criteria (TPC) standards.Treadwear
The treadwear grade is a comparative 
rating based on the wear rate of the tire 
when tested under controlled conditions on 
a specified government test course. For 
example, a tire graded 150 would wear one 
and a half (1.5) times as well on the govern-
ment course as a tire graded 100. The rela-
tive performance of tires depends upon the 
actual conditions of their use, however, and 
may depart significantly from the norm due 
to variations in driving habits, service prac-
tices and differences in road characteristics 
and climate.
Traction – AA, A, B, C
The traction grades, from highest to lowest, 
are AA, A, B, and C. Those grades repre-
sent the tire’s ability to stop on wet pave-
ment as measured under controlled condi-
tions on specified government test surfaces 
of asphalt and concrete. A tire marked C 
may have poor traction performance. Warn-
ing: The traction grade assigned to this tire 
is based on straight-ahead braking traction 
tests, and does not include acceleration, 
cornering, hydroplaning, or peak traction 
characteristics.Temperature – A, B, C
The temperature grades are A (the highest), 
B, and C, representing the tire’s resistance 
to the generation of heat and its ability to dis-
sipate heat when tested under controlled 
conditions on a specified indoor laboratory 
test wheel. Sustained high temperature can 
cause the material of the tire to degenerate 
and reduce tire life, and excessive temper-
ature can lead to sudden tire failure. The 
grade C corresponds to a level of perfor-
mance which all passenger car tires must 
meet under the Federal Motor Vehicle 
Safety Standard No. 109. Grades B and A 
represent higher levels of performance on 
the laboratory test wheel than the minimum 
required by law.
Warning: The temperature grade for this tire 
is established for a tire that is properly 
inflated and not overloaded. Excessive 
speed, underinflation, or excessive loading, 
either separately or in combination, can 
cause heat buildup and possible tire failure.95usM06.book  Page 229  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com 
Page 230 of 288
230 Car care and technical informationWheel Alignment and Tire Balance
The wheels on your vehicle were aligned 
and balanced carefully at the factory to give 
you the longest tire life and best overall per-
formance.
Scheduled wheel alignment and wheel bal-
ancing are not needed. However, if you 
notice unusual tire wear or your vehicle pull-
ing one way or the other, the alignment may 
need to be reset. If you notice your vehicle 
vibrating when driving on a smooth road, 
your wheels may need to be rebalanced.
Wheel Replacement
Replace any wheel that is bent, cracked or 
badly rusted or corroded. If wheel nuts keep 
coming loose, the wheel, wheel bolts and 
wheel nuts should be replaced. If the wheel 
leaks air, replace it (except some aluminum 
wheels, which can sometimes be repaired). 
See your dealer if any of these conditions 
exist.
Your dealer will know the kind of wheel you 
need.
Each new wheel should have the same 
load-carrying capacity, diameter, width, 
offset and be mounted the same way as the 
one it replaces.
If you need to replace any of your wheels, 
wheel bolts or wheel nuts, replace them only 
with new Saab original equipment parts. 
This way, you will be sure to have the right 
wheel, wheel bolts and wheel nuts for your 
vehicle.Make sure tires with Tire Pressure Monitors 
are fitted as replacement tires on cars with 
this system.
Notice: The wrong wheel can also cause 
problems with bearing life, brake cool-
ing, speedometer or odometer calibra-
tion, headlamp aim, bumper height, vehi-
cle ground clearance and tire or tire 
chain clearance to the body and chassis.
See “Changing a wheel” on page 239.Used Replacement Wheels
WARNING
Using the wrong replacement wheels, 
wheel bolts or wheel nuts on your vehicle 
can be dangerous. It could affect the 
braking and handling of your vehicle, 
make your tires lose air and make you 
lose control. You could have a collision in 
which you or others could be injured. 
Always use the correct wheel, wheel bolts 
and wheel nuts for replacement.
WARNING
When fitting just one new pair of tires, 
these should be fitted to the rear wheels, 
as these are more critical to the direc-
tional stability of the car (e.g. on braking 
or in a skid). The existing rear wheels 
should therefore be moved to the front.
WARNING
Putting a used wheel on your vehicle is 
dangerous. You can’t know how it’s been 
used or how far it’s been driven. It could 
fail suddenly and cause a crash. If you 
have to replace a wheel, use a new GM 
original equipment wheel.
95usM06.book  Page 230  Thursday, November 17, 2005  8:59 AM
ProCarManuals.com