ignition SSANGYONG KORANDO 2013 Workshop Manual

Windshield washer switch coupled windshield wiper operation
The ignition is turned ON.
When the windshield washer switch is turned ON for 0.6 seconds or more (T2), the windshield
washer motor is activated.
The windshield wiper LO relay is activated 0.5 seconds (T1) after the windshield washer switch is
turned ON.
When the windshield washer switch is turned OFF, the windshield wiper LO relay is deactivated after
the windshield wiper motor rotates 3 times (T3). A.
B.
C.
D. Operation 1. (washer switch pressed for 0.1 to 0.59 seconds)

8710-01
Windshield washer switch coupled windshield wiper operation (during intermittent
windshield wiper)
The ignition is turned ON with the wiper AUTO switch ON.
The windshield wiper LO relay is activated 0.5 seconds (T1) after the windshield washer switch is
turned ON for less than 0.6 seconds (T2). A.
B. Operation 1. (windshield washer switch pressed for 0.1 to 0.59 seconds)
When the windshield washer switch is turned OFF, the windshield wiper LO relay is deactivated
after the windshield wiper motor rotates once (T5), and then the windshield wiper is operated
intermittently after the rest time (T6). -
The ignition is turned ON with the wiper AUTO switch ON.
The windshield wiper LO relay is activated 0.5 seconds (T1) after the windshield washer switch is
turned ON for 0.6 seconds or more (T3). C.
D. Operation 2. (windshield washer switch pressed for 0.6 seconds or more)
When the windshield washer switch is turned OFF, the windshield wiper LO relay is deactivated
after the windshield wiper motor rotates 3 times (T4), and then the windshield wiper is operated
intermittently after the rest time (T6). -

8710-01
Rear washer motor control
The ignition is turned ON.
The rear washer motor is activated when the rear washer switch is turned ON.
The rear washer motor is deactivated when the rear washer switch is turned OFF. A.
B.
C. Operation 1.
Operating process
- IGN ON
Priority of operation: Windshield washer switch > Rear washer switch.

8710-01
Operating process
BCM and rain sensor system diagram
Data recognition time
The LIN communication is established when the ignition is turned ON, regardless of the wiper and light
switch operation. Then the function for the LIN data is carried out with the wiper AUTO switch or AUTO
light switch in the AUTO position.
The data from the rain sensor is recognized as 2 consecutive data.
Operation when data is recognized
Data OFF: Lo/HI relay output OFF
Low speed signal: LO relay output ON (ON for at least 1 revolution), HI relay output OFF
High speed signal: HI relay output ON (ON for at least 1 revolution), LO relay output ON
The washer input is overridden during continuous operation of wiper. (washer coupled wiper operation
during intermittent operation)

Power-up reminder wiper
The wiper AUTO switch is in the ON position.
The ignition is turned ON, and then OFF, and then ON again.
The windshield wiper LO relay is not operated. A.
B.
C. Operation 1.
The position of the wiper AUTO switch is changed to the ON from the OFF position with IGN ON.
The wiper motor rotates once (T1) initially when the windshield wiper LO relay is activated, regardless of
the rain sensor communication. D.
E. Operation 2.
The ignition is turned ON with the wiper AUTO switch in the ON position.
The windshield wiper LO relay is not operated. F.
G. Operation 3.
(The rain sensor did not detect rain drops after Operation 2.)
Operation 4.
(The rain sensor detects rain drops after Operation 2.)
The ignition is turned ON with the wiper AUTO switch in the ON position.
The windshield wiper LO relay is operated. H.
I.

Wiper LO/HI control
When front or rear washer signal is input during the wiper LO/HI operation, the front or rear washer
motor is activated.
The AUTO washer input is overridden during wiper LO/HI operation. A.
B. Operation 1.
When the signal from the wiper LO/HI switch is received, the wiper LO/HI relay is turned ON/OFF.
(The wiper LO relay is always activated when the HI relay is activated.)
If the ignition turned OFF while the wiper is operated, the wiper stops operating when the wiper
motor parking signal is input.
If no wiper motor parking signal is input during the wiper LO/HI operation, the wiper relay continues
working. (If no wiper parking signal is input for 3 seconds of wiper AUTO operation, wiper relay is
deactivated after 5 seconds - failure notification)
When the ignition is turned OFF during the wiper HI operation, the wiper is operated in LO mod and
then returns to the parking position. -
-
-
-

Internal buzzer (chime) operation for ignition key reminder
When the driver door is opened with the ignition key inserted, the internal buzzer (chime) is operated
for 10 seconds at intervals of 0.02 sec. ON/1.38 sec. OFF. A. Operation 1.
When the ignition key is removed or the driver door is closed while the internal buzzer (chime) is
activated for up to 10 seconds, the buzzer is deactivated. B. Operation 2.
5. IGNITION KEY REMINDER
The 2 operations stated above are not available after the ignition is turned ON. C. Operation 3.
This function overrides the tail lamp switch warning function.

Ignition key reminder operation
The door LOCK switch is in LOCK position after the driver door is opened with the ignition key
inserted.
The UNLOCK signal is output for 0.5 seconds (T2) immediately after the LOCK signal output. A.
B. Operation 1.
The door LOCK switch is in LOCK position within 0.5 seconds (T1) after the door is closed with the
ignition key inserted.
The UNLOCK signal is output for 0.5 seconds (T2) immediately after the LOCK signal output. C.
D. Operation 2.
The door LOCK switch is in LOCK position after the driver door is opened with the ignition key
inserted.
The door UNLOCK signal is not output when the ignition key is removed during the door LOCK
output. E.
F. Operation 3.
Operating process

All doors LOCK prevention function
When the LOCK signal is input with the doors (driver/passenger/rear) open and the ignition key
removed or IGN ON).
The UNLOCK signal is output for 0.5 seconds (T1) immediately after the LOCK signal output. A.
B. Operation 1.
All doors are closed during the UNLOCK output.
The UNLOCK output continues. C.
D. Operation 2.
When the ignition key is inserted, the ignition key reminder is operated. E. Operation 3.Except tailgate and hood -
Operating process
This function does not work if the vehicle speed is over 10 km/h.

Tail lamp ON warning
The driver door is opened with the tail lamp ON and ACC or IGN OFF (ignition key removed).
The internal buzzer (chime) sounds for 10 seconds (T2) at intervals of 1.4 seconds (T1). A.
B. Operation 1.
The tail lamp switch is turned OFF while the internal buzzer (chime) is activated, or the driver door is
closed.
The internal buzzer (chime) is deactivated immediately. C.
D. Operation 2.
6. TAIL LAMP CONTROL
The 2 operations stated above are not available after the ignition is turned ON. E. Operation 3.
The sunroof and ignition key reminder warnings override this function.
If the tail lamp switch is turned ON from OFF while the internal buzzer (chime) is activated, the
buzzer sounds again. -
-