Torque SUZUKI SWIFT 2000 1.G RG413 Service Workshop Manual

6K-4 EXHAUST SYSTEM
EXHAUST MANIFOLD
REMOVAL AND INSTALLATION
Refer to Section 6A1 for removal and installation procedures of exhaust manifold.
INSPECTION
Check gasket and seal for deterioration or damage.
Replace them as necessary.
EXHAUST PIPE
REMOVAL AND INSTALLATION
For replacement of exhaust pipe, be sure to hoist vehicle and observe WARNING under “MAINTENANCE” and
the following.
Tighten bolts and nuts to specified torque when reassembling. Refer to “GENERAL DESCRIPTION” for
location of bolts and nuts.
After installation, start engine and check each joint of exhaust system for leakage. CAUTION:
Exhaust pipe have three way catalytic converter in it, it should not be exposed to any impulse.
Be careful not to drop it or hit it against something.