TOYOTA AURIS 2018 Owners Manual (in English)

3515-6. Using Bluetooth® devices
UK AURIS_HV_HB_EE (OM12M49E)
5
Audio system
Device registration/connection flow
1. Register a Bluetooth® device to be used with the audio
system ( P. 356)
2. Connect a registered Bluetooth® device to be used
( P. 357, 358)
To be used for audioTo be used for hands-free phone
3. Set automatic connection of the device
( P. 360)
4. Check the Bluetooth® connection condition
( P. 352)
5. Use Bluetooth® audio
( P. 367)
5. Use Bluetooth® phone
( P. 370)

3525-6. Using Bluetooth® devices
UK AURIS_HV_HB_EE (OM12M49E)
Bluetooth® connection status
If “BT” is not displayed, the
Bluetooth® audio/phone cannot
be used.
Display
A message, name, number, etc.
is displayed.
Lower-case characters and special
characters cannot be displayed.
Displays the set up menu/inputs the selected item
Select items such as menu and number
Off-hook switch
Turns the hands-free system on/starts a call
On-hook switch
Turns the hands-free system off/ends a call/refuses a call
Displays information that is too long to be displayed at one time on
the display (press and hold)
Select speed dials
Audio unit
1
2
Microphone
3
4
5
6
7
8

3535-6. Using Bluetooth® devices
UK AURIS_HV_HB_EE (OM12M49E)
5
Audio system
To enter a menu, press the “SETUP/ENTER” button and navigate
menus by using the “<SELECT”, “TUNE>” and “SETUP/ENTER” but-
tons:
Menu list of the Bluetooth® audio/phone
First menuSecond menuThird menuOperation details
“Bluetooth*”
“Pairing”-
Register a
Bluetooth®
device
“List phone”-
List the regis-
tered cellular
phones
“List audio”-
List the regis-
tered portable
players
“Passkey”-Change the
passkey
“BT power”-
Set automatic
connection of the
device on or off
“Bluetooth* info”
“Device Name”
“Device
Address”
Display the
device status
“Display setting”-
Set the auto-
matic connec-
tion confirmation
display on or off
“Reset”-Initialize the set-
tings

3545-6. Using Bluetooth® devices
UK AURIS_HV_HB_EE (OM12M49E)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
■Bluetooth® audio/phone system functions
Depending on the Bluetooth® device, certain functions may not be available.
“PHONE” or
“TEL”
“Phonebook”
“Add contacts”Add a new num-
ber
“Add SD”Register a speed
dial
“Delete call his-
tory”
Delete a number
stored in the call
history
“Delete contacts”
Delete a number
stored in the
phonebook
“Delete other
PB”
Delete a phone-
book’s data
“HF sound set-
ting”
“Call volume”Set call volume
“Ringtone vol-
ume”
Set ringtone vol-
ume
“Ringtone”Set the ringtone
“Transfer history”-Transfer the call
histories
First menuSecond menuThird menuOperation details

3555-6. Using Bluetooth® devices
UK AURIS_HV_HB_EE (OM12M49E)
5
Audio system
Vo l u m e
The voice guidance volume
cannot be adjusted using these
buttons.
Off-hook switch
Turns the hands-free system
on/starts a call
On-hook switch
Turns the hands-free system off/ends a call/refuses a call
Talk switch
A message will be displayed.
Using the steering wheel switches
The steering wheel switches can be used to operate a connected
cellular phone or portable digita l audio player (portable player).
Operating a Bluetooth® phone using the steering wheel switches
1
2
3
4

3565-6. Using Bluetooth® devices
UK AURIS_HV_HB_EE (OM12M49E)
Press the “SETUP/ENTER” button and select “Bluetooth*” using
the “<SELECT” or “TUNE>” button.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Press the “SETUP/ENTER” button a nd select “Pairing” using the
“<SELECT” or “TUNE>” button.
A passkey will be displayed.
SSP (Secure Simple Pairing) incompatible Bluetooth® devices:
Input the passkey into the device.
SSP (Secure Simple Pairin g) compatible Bluetooth® devices:
Select “Yes” to register the device. Depending on the type of
device, it may register automatically.
If a Bluetooth® device has both music player and cellular phone func-
tions, both functions will be register ed at the same time. When delet-
ing the device, both functions will be deleted at the same time.
If the off-hook switch is press ed and the “PHONE” or “TEL” mode is
entered when no phones have been registered, the registration
screen will be automatically displayed.
Registering a Bluetooth® device
Before using the Bluetooth® audio/phone, it is necessary to reg-
ister a Bluetooth® device in the system. You can register up to 5
Bluetooth® devices.
How to register a Bluetooth® device
1
2
3

357
UK AURIS_HV_HB_EE (OM12M49E)
5
Audio system
5-7. “SET UP” menu
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select “Pairing” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons ( P. 353), and perform the procedure for registering
a portable player. ( P. 356)
Select “List phone” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons. ( P. 353) The list of registered cellular phones will
be displayed.
● Connecting the registered cellular phone to the audio system
Select the name of the cellular phone to be connected using the
“<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Select” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons.
● Deleting a registered cellular phone
Select the name of the cellular phone to be deleted using the
“<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Delete” using the “< SELECT”, “TUNE>” and “SETUP/
ENTER” buttons.
Press “Yes”.
Using the “SET UP” menu (“Bluetooth*”
menu)
Registering a Bluetooth® device in the system allows the system
to function. The following functi ons can be used for registered
devices:
Registering a portable player
Listing the registered cellular phones
1
2
1
2
3

3585-7. “SET UP” menu
UK AURIS_HV_HB_EE (OM12M49E)
●Disconnecting the registered cellular phone from the audio system
Select the name of the cellular to be disconnected using the
“<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Disconnect” using the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons.
Press “Yes”.
Select “List audio” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons. ( P. 353) The list of registered portable players will
be displayed.
● Connecting the registered portable player to the audio system
Select the name of the portable pl ayer to be connected using the
“<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Select” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons.
● Deleting the registered portable player
Select the name of the portable player to be deleted using the
“<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Delete” using the “< SELECT”, “TUNE>” and “SETUP/
ENTER” buttons.
Press “Yes”.
Listing the registered portable players
1
2
3
1
2
1
2
3

3595-7. “SET UP” menu
UK AURIS_HV_HB_EE (OM12M49E)
5
Audio system
●Disconnecting the registered portable player from the audio system
Select the name of the portable player to be disconnected using
the “<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Disconnect” using the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons.
Press “Yes”.
● Selecting the connection method
Select the name of the desired portable player using the
“<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.
Select “Connection method” usin g the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons.
Select “From vehicle” or “From audio” using the “<SELECT”,
“TUNE>” and “SETUP/ENTER” buttons.
Select “Passkey” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons. ( P. 353)
Input a 4 to 8-digit passkey using the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons.
Input the number 1 digit at a time.
When the entire number to be registered as a passkey has been
input, press “Enter”.
If the passkey to be registered has 8 digits, pressing “Enter” is not
necessary.
Changing the passkey
1
2
3
1
2
3
1
2
3

3605-7. “SET UP” menu
UK AURIS_HV_HB_EE (OM12M49E)
If “BT power” is set to on, the registered device will be connected
automatically when the power switch is turned to ACCESSORY
mode.
Select “BT power” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons. ( P. 353)
Select “On” or “Off” using the “SETUP/ENTER” button.
Select “Bluetooth* info” using the “<SELECT”, “TUNE>” and “SETUP/
ENTER” buttons. ( P. 353)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
●Displaying the device name
Select “Device name” using the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons.
● Displaying the device address
Select “Device address” using the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons.
If the “Display setting” is set to on, the portable player connection sta-
tus will be displayed when the power switch is turned to ACCESSORY
or ON mode.
Select “Display setting” using the “<SELECT”, “TUNE>” and
“SETUP/ENTER” buttons. ( P. 353)
Select “On” or “Off” using the “SETUP/ENTER” button.
Setting automatic connection of the device on or off
Displaying the device status
Setting the automatic connecti on confirmation display to on or
off
1
2
1
2