TOYOTA LAND CRUISER 1996 J80 Workshop Manual
Page 1201 of 1399
SF1EJ−01
SF−16
−
SFI FUEL PUMP
1996 LAND CRUISER (RM451U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page SF−13 ).
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1202 of 1399
SF1EK−01
−
SFI FUEL PUMP
SF−17
1996 LAND CRUISER (RM451U)
INSTALLATION
Installation is in the reverse order of removal (See page SF−11 ).
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1203 of 1399
SF1EL−01
SF−18
−
SFI FUEL FILTER
646
Author: Date:
1996 LAND CRUISER (RM451U)
FUEL FILTER
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1204 of 1399
SF1EM−01
−
SFI FUEL PRESSURE REGULATOR
SF−19
647
Author: Date:
1996 LAND CRUISER (RM451U)
FUEL PRESSURE REGULATOR
ON−VEHICLE INSPECTION
INSPECT FUEL PRESSURE (See page SF−1 )
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1205 of 1399
SF0XZ−04
SF−20
−
SFI FUEL PRESSURE REGULATOR
1996 LAND CRUISER (RM451U)
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1206 of 1399
SF0Y0−06
−
SFI FUEL PRESSURE REGULATOR
SF−21
1996 LAND CRUISER (RM451U)
REMOVAL
1. DISCONNECT VACUUM SENSING HOSE FROM FUEL
PRESSURE REGULATOR
2. DISCONNECT FUEL RETURN HOSE FROM FUEL PRESSURE REGULATOR
CAUTION:
Put a shop towel under the pressure regulator.
3. REMOVE FUEL PRESSURE REGULATOR
(a) Loosen the lock nut, and remove the pressure regulator.
(b) Remove the O−ring from the pressure regulator.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1207 of 1399
SF0Y1−06
SF−22
−
SFI FUEL PRESSURE REGULATOR
1996 LAND CRUISER (RM451U)
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR
(a) Fully loosen the lock nut on the pressure regulator.
(b) Apply a light coat of gasoline to a new O −ring, and install
it to the pressure regulator.
(c) Insert the pressure regulator into the delivery pipe by hand completely.
(d) Turn the pressure regulator counterclockwise until the fuel outlet port faces in the direction indicated in the il-
lustration.
(e) Tighten the lock nut. Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
2. CONNECT FUEL RETURN HOSE TO FUEL PRES-
SURE REGULATOR
3. CONNECT V ACUUM SENSING HOSE TO FUEL PRES-
SURE REGULATOR
4. START ENGINE AND CHECK FOR FUEL LEAKAGE
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1208 of 1399
SF0Y1−06
SF−22
−
SFI FUEL PRESSURE REGULATOR
1996 LAND CRUISER (RM451U)
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR
(a) Fully loosen the lock nut on the pressure regulator.
(b) Apply a light coat of gasoline to a new O −ring, and install
it to the pressure regulator.
(c) Insert the pressure regulator into the delivery pipe by hand completely.
(d) Turn the pressure regulator counterclockwise until the fuel outlet port faces in the direction indicated in the il-
lustration.
(e) Tighten the lock nut. Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
2. CONNECT FUEL RETURN HOSE TO FUEL PRES-
SURE REGULATOR
3. CONNECT V ACUUM SENSING HOSE TO FUEL PRES-
SURE REGULATOR
4. START ENGINE AND CHECK FOR FUEL LEAKAGE
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1209 of 1399
SF0OR−05
−
SFI INJECTOR
SF−23
651
Author: Date:
1996 LAND CRUISER (RM451U)
INJECTOR
ON−VEHICLE INSPECTION
1. REMOVE THROTTLE BODY (See page SF−45)
2. INSPECT INJECTOR RESISTANCE
(a) Disconnect the 6 injector connectors.
(b) Using an ohmmeter, measure the resistance between the
terminals.
Resistance: 13.4 − 14.2 Ω at 20°C (68°F)
If the resistance is not as specified, replace the injector.
(c) Reconnect the 6 injector connectors.
3. REINSTALL THROTTLE BODY (See page SF−48)
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 1210 of 1399
SF0OS−05
SF−24
−
SFI INJECTOR
1996 LAND CRUISER (RM451U)
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010