display TOYOTA LAND CRUISER 2003 J100 Navigation Manual

130
2003 Land Cruiser 100 Navigation (OM60A00U)
unx608
5. Insert the magazine into the player as
indicated by the arrow ahead on the mag-
azine, close the door and console box.
When the magazine is set completely, the
system will be in a “Load” cycle for approxi-
mately 30 seconds while the system
searches for discs in the magazine. Upon
completion of this cycle, the DVD player unit
will be ready to play. If the “DISC” button is
pushed during the “Load” cycle, “LOAD” ap-
pears on the display until the system has
completed the load cycle, after which the
system will begin normal play.
CAUTION
To reduce the chance of injury in case
of an accident or a sudden stop, always
keep the console box closed while driv-
ing.
Push the “DISC” button if the magazine is
already loaded in the player.
“DVD CHANGER” appears on the display.
The discs set in the magazine are played
continuously, starting with disc number 1.
The disc number of the disc currently being
played, the track number and the time from
the beginning of the program are shown on
the display.
(b) Playing a disc

131
2003 Land Cruiser 100 Navigation (OM60A00U)
On the screen: Touch the desired disc
number.
The selected disc number is highlighted in
green.
The player will start playing the selected disc
from the first track.
On the audio panel: Push the “” or “”
side of the “DISC” button.
When you release the button, the player will
start playing the selected disc from the first
track. (i) Playing an audio CD
unx610
Push the ”AUDIO” button to display this
screen. You can operate the switches
and choose the number of the disc you
want to play. The selected disc is auto-
matically played.
(ii) Selecting a desired track
“TRACK” button: Use for direct access to
a desired track.
Push either side of the “TRACK”
button and
hold it until the desired track number appears
on the display. As you release the button, the
player will start playing the selected track
from the beginning.
Fast forward: Touch the “
” switch and
hold it to fast forward the disc. When you re-
lease the switch, the player will resume play-
ing from that position.
(c) Selecting a desired disc(d) Operating an audio CD

133
2003 Land Cruiser 100 Navigation (OM60A00U)
(iv) Other functions
“RPT” switch: Use it for automatic repeat of
the track you are currently listening to.
Touch the switch while the track is playing.
When the track is finished, the player will au-
tomatically go back to the beginning of the
track and play the track again. To cancel it,
touch the switch once again.
“DISC RPT” switch: Use it for automatic re-
peat of the disc you are currently listening to.
Touch the switch while the disc is playing.
When the disc is finished, the player will auto-
matically go back to the beginning of the disc
and play the disc again. To cancel it, touch
the switch once again. “RAND” switch: Use it for automatic and
random selection of the disc which you are
currently listening to.
When the switch is touched, the system se-
lects a track in the disc you are currently lis-
tening
to. To cancel it, touch the switch once
again.
“DISC RAND” switch: Use it for automatic
track selection for all the audio discs and play
by the system.
When the switch is touched, the system se-
lects a track in all the audio discs in the mag-
azine which is set and plays it. To cancel it,
touch the switch once again.
”TITLE” switch: Use it for displaying the
song title and track number while the CD −
TEXT disc is playing.
The switch is not displayed on the screen
while the CD −TEXT disc is not playing. Up
to 29 letters can be displayed. To cancel it,
touch the ”TITLE OFF” switch. NOTE: The playback condition of some
DVD video discs may
be determined by a
DVD video software producer. This DVD
player plays a disc as the software pro-
ducer intended. So some functions may
not work properly. Be sure to read the in-
struction manual for the DVD video disc
separately provided. For the detailed in-
formation about DVD video discs, see
”(h) DVD player and DVD video disc infor-
mation”.
(e) Operating a DVD video disc

134
2003 Land Cruiser 100 Navigation (OM60A00U)
Precautions on DVD video disc
When recording with a DVD video or video
CD, audio tracks may not record in some
cases while the menu is displayed. As audio
will not play in this case, verify that the video
tracks are playing and then activate play-
back.
When playback of a disc is completed:
 If an audio CD is playing, the next CD will
be selected and playback will begin auto-
matically.
 If a DVD video or video CD is playing,
playback will stop or the menu screen will
be displayed. The next disc will not play
back automatically. (Audio tracks cannot
be heard while the disc is stopped)
The title/chapter number and playback time
display may not appear while playing back
certain DVD video discs.
CAUTION
Conversational speech on some DVDs
is recorded at a low volume to empha-
size the impact of sound effects. If you
adjust the volume assuming that the
conversations represent the maximum
volume level that the DVD will play, you
may be startled by louder sound effects
or when you change to a different audio
source. The louder sounds may have a
significant impact on the human body
or pose a driving hazard. Keep this in
mind when you adjust the volume.
The ”DVD Hint!” screen appears when
the video screen is first displayed after
you turn the ignition key to ”ACC” or
”ON”.
Touch the ”OK” switch when you read the
message.

135
2003 Land Cruiser 100 Navigation (OM60A00U)
(i) Playing a DVD video disc
unx614
Push the ”AUDIO” button to display this
screen. You can operate the switches
and choose the number of the disc you
want to play. The selected disc is auto-
matically played.
When you touch the “PICTURE” switch, the
video screen returns.(ii) Displaying operation switches
unx616
unx615
If you touch a part of the screen, where
switches are not located while you are
watching video, DVD video operation
switches will appear.“Second
Page” switch: Use this switch to
display the operation switches on the sec-
ond page.
“Top Page” switch:Use this switch to dis-
play the operation switches on the top page.
“Hide Keys” switch: Use this switch to turn
off the operation switches from the display.
If “
” appears on the display when you
touch a switch, the operation relevant to the
switch is not permitted.

136
2003 Land Cruiser 100 Navigation (OM60A00U)
(iii) Description of each switch
 Switches on top page
“Menu” and “Top Menu” switches: If you
touch any of the above switches, the menu
screen for DVD video appears. (For the op-
eration, see the manual that come with the
DVD video disc provided separately.)
“
” switch: The menu control key ap-
pears on the screen. (See page 136.)
“
” switch: Use this switch to pause the
video screen. When you touch this switch
again, the video screen advances frame by
frame.
“ \b\b ” switch: Touch this switch to fast re-
verse during playback and reverse slowly
during pause.
“  ” switch: Use this switch to resume nor-
mal play after stop or pause.
“  ” switch: Touch this switch to fast for-
ward during playback and forward slowly
during pause.
 Switches on second page
“Set Up” switch: The initial set up screen
appears. (See page 138.) “Search” switch: The title search screen
appears. (See page 137.)
“Return”
switch: Use this switch to display
the predetermined scene and start playing
from there.
“Audio” switch: The audio changing
screen appears. (See page 137.)
“Sub Title” switch: The subtitle changing
screen appears. (See page 137.)
“Angle” switch: T h e a n g le s e le c tio n
screen appears. (See page 138.) (iv) Selecting a menu item
Enter the menu item using ”
”, ””, ””
and ” ” switches and touch ”Enter”.
The player starts playing video for that
menu item. (For details, see the manual
that comes with the DVD video disc pro-
vided separately.)
Each you push ”Shift Keys” switch, the
switches on the screen move upward and
downward.
When you push ”OFF” switch, the displayed
switches do not display. To display them
again, push ”ON” switch.
Touch ”Back”, the previous screen returns.

138
2003 Land Cruiser 100 Navigation (OM60A00U)
(viii)Changing the angle
unx619
The angle can be selected for discs that
are multiangle compatible when the
angle mark appears on the display.
Each time you touch “Angle”, the angle
changes.
Touch “Back”, the previous screen returns.(ix) Setup menu
unx617
The initial setting can be changed.

Audio language
You can change the audio language.
1. Touch “Audio Lang.”
2. Touch the language you want to hear
on the “Select Audio Lang.” screen and
“Enter”.
If you cannot find the language you want to
hear on this screen, touch “Others” and enter
a language code. For the entry of language
code, see the following ”(x) Entry of language
code”. 
Subtitle language
You can change the subtitle language.
1. Touch “Subtitle Lang.”
2. Touch a language you want to read on
the “Select Subtitle Lang.” screen and
“Enter”.
If you cannot find the language you want to
read on this screen, touch “Others” and enter
a language code. For the entry of language
code, see the following ”(x) Entry of language
code”.
 DVD language
You can change the language on the DVD
video menu.
1. Touch “DVD Language”
2. Touch the language you want to read
on the “Select DVD Language” screen
and “Enter”.
If you cannot find the language you want to
read on this screen, touch “Others” and enter
a language code. For the entry of language
code, see the following ”(x) Entry of language
code”.

139
2003 Land Cruiser 100 Navigation (OM60A00U)
 Angle mark
The multiangle mark can be turned on or
off on the screen while the disc which is
multiangle compatible is being played.
Each time you touch “Angle Mark”, the
angle mark on the display turns on or off
alternately.
 Parental
The level of viewer restrictions can be
changed.
1. Touch “Parental”.
2. Touch the numbers of your personal
code on the “Enter personal code”
screen and touch “Enter”. If you enter the
wrong numbers, touch “Clear” to delete
the numbers.
10 touches of “Clear” will initialize the per-
sonal code.
3. Touch a parental level (18) on the “Se-
lect Restriction Level” and “Enter”.
When you touch ”Initial”, all the settings ex-
cept ”Parental” of this menu will be initialized. (x) Entry of language code
unx618
If you touch “Others” on the “Select Au-
dio Lang.” screen, “Select Subtitle Lang.”
screen or “Select DVD language” screen,
you can select the language you want to
hear or read by entering a language code.
1. Touch the numbers of the language
code.
If you enter the wrong numbers, touch
“Clear” to
delete the numbers.
2. Touch “Enter”.
Code
Language
1001Japanese
0514English
0618French
0405German
0920Italian
0519Spanish
2608Chinese
1412Dutch
1620Portuguese
1922Swedish
1821Russian
111 5Korean
0512Greek
0101Afar
0102Abkhazian
0106Afrikaans
0113Amharic
0118Arabic
0119Assamese
0125Aymara
0126Azerbaijani

142
2003 Land Cruiser 100 Navigation (OM60A00U)
2515Yoruba
2621Zulu
(i) Playing a video CD
unx623
Push the ”AUDIO” button to display this
screen. You can operate the switches
and choose the number of the disc you
want to play.
When you touch the “PICTURE” switch, the
video screen returns.(ii) Displaying operation switches
unx624
unx625
(f) Operating a video CD

143
2003 Land Cruiser 100 Navigation (OM60A00U)
If you touch the part where switches are not
located while you are watching video on the
video CD, video CD operation switches will
appear.
“Second Page” switch: Use this switch to
display the operation switches on the sec-
ond page.
“Top Page” switch:Use this switch to dis-
play the operation switches on the top page.
“Hide Keys” switch: Use this switch to turn
off the operation switches from the display.
If “
” appears on the display when you
touch the switch, the operation is not per-
mitted. (iii) Description of each switch
 Switches on top page
“Sel. Number” switch: The track or num-
ber search screen appears. (See “Searching
by track” on the next page.)
“D. Menu Prev.” switch: When you touch
this switch while the disc menu is displayed,
the previous page appears on the screen. If
you touch this switch while the player is play-
ing video, the previous track is searched and
played.
“D. Menu Next” switch: When you touch
this switch while the disc menu is displayed,
the next page appears on the display. If you
touch this switch while the player is playing
video, the next track is searched and played.
“Main/Sub” switch: A multiplex transmis-
sion changing switch. The mode changes
from Main/Sub to Main, to Sub and back to
Main/Sub by touching this switch. 
Switches on second page
“
” switch: Use this switch to pause the
video screen. When you touch this switch
again, the video screen advances by frame
by frame.
“ \b\b ” switch: Touch this switch to fast re-
verse during playback.
“  ” switch: Touch this switch during pause
to resume playing.
“  ” switch: Touch this switch to fast for-
ward during the playback and start playing
slowly during pause.