TOYOTA LAND CRUISER 2007 J200 Navigation Manual

xli
(b) Setting a search point
It is possible to display the names of POIs lo-
cated within approximately 20 miles (30 km)
from the selected search point.
Touch the
“Search Point” switch.
To set search points, the following four meth-
ods are possible.
1. Inputting city center
2. Setting the current position as the search
point
3. Setting the search point via the map
screen
4. Setting the search point from the des-
tinationsINPUTTING CITY CENTER
Touch the
“Input City Center”switch.
Input the city center name.
Touch the switch of the desired city cen-
ter name.
When you touch an arrow facing the desired
point, the map scrolls in that direction. When
you release your finger, scrolling stops.
To set the position of the cursor, touch the
“Enter” switch.

xlii SETTING THE CURRENT POSITION AS
THE SEARCH POINT
Touch the
“Current Position” switch.
When you touch an arrow facing the desired
point, the map scrolls in that direction. When
you release your finger, scrolling stops.
To set the position of the cursor, touch the
“Enter” switch.SETTING THE SEARCH POINT VIA THE
MAP SCREEN
Touch the
“Map” switch.
When you touch an arrow facing the desired
point, the map scrolls in that direction. When
you release your finger, scrolling stops.
To set the position of the cursor, touch the
“Enter” switch.SETTING THE SEARCH POINT FROM
THE DESTINATIONS
Touch the destination switches at the
bottom of the screen.
When you touch an arrow facing the desired
point, the map scrolls in that direction. When
you release your finger, scrolling stops.
To set the position of the cursor, touch the
“Enter” switch.

xliii
(c) Selecting from a list
You can select the desired destination from
the listed POI names.
When you touch the switch of the desired
item, the screen changes and displays
the map location of the selected destina-
tion and the route preference. (See
“ —
Entering destination” on page xlviii.)
“Dist.”: To sort in the order of distance from
your current location.
“Icon”: To sort in the order of the POI icons.
“Name”: To sort in alphabetical order by
name.
“On Route”: When the indicator is illumi-
nated by touching this switch, the list of the
items searched along the route is displayed.
— Destination input by
“Emergency”
By touching the “Emergency” switch
on the “Destination” screen, the display
changes to a screen to select dealers,
hospitals or police stations. During driv-
ing, only nearby police stations, hospi-
tals or dealers are shown. The current
position is shown with an address, the
latitude and the longitude at the top of the
screen.
When you touch the desired emergency
category, the selected emergency category
list is displayed.
Touch the switch of the desired destina-
tion. The screen changes and displays
the map location of the selected destina-
tion and the route preference. (See
“ —
Entering destination” on page xlviii.)
“Dist. Sort”: To sort in the order of distance
from your current position. The distance
from your current position up to the destina-
tion is displayed on the right of the name.
“Name Sort”: To sort in alphabetical order
by name.
INFORMATION
The navigation system does not guide
in areas where route guidance is un-
available. (See page xii.)

xliv
— Destination input by
“Memory”
Touching the “Memory” switch on the
“Destination” screen displays your list of
registered memory points. See page
lxxvii for registering and editing memory
points.
When you touch the switch of your de-
sired memory point, the screen changes
and displays the map location of the se-
lected destination and the route prefer-
ence. (See “ — Entering destination” on
page xlviii.)There are 4 ways to list the memory point
by touching switches on the bottom of
the screen.
“Date”: To list the memory points in order of
registered date.
“Icon”: To list the memory points by the reg-
istered icon.
“Name”: To list the memory points in alpha-
betical order.
“Attribute”: To list the memory points by the
registered attribute.
— Destination input by
“Previous”
Touch the “Previous” switch on the
“Destination” screen.
The previous starting point and up to 99 pre-
viously set destinations are displayed on the
screen.
Touch the switch of the desired destina-
tion. The screen changes and displays
the map location of the selected destina-
tion and the route preference. (See “ —
Entering destination” on page xlviii.)
“Date”: To list the previous destinations in
order of registered date.
“Name”: To list the previous destinations in
alphabetical order.

xlv
INFORMATION
You can delete the list of previous des-
tinations while your vehicle is stopped,
if you no longer need them. (See page
ciii.)
— Destination input by “Map”
Touch the “Map” switch on the “Des-
tination” screen.
The screen changes and displays the
map location that was previously dis-
played just before the destination input
operation and the route preference. (See
“ — Entering destination” on page xlviii.)
INFORMATION
Guidance starts if you touch the “En-
ter” switch even while driving. How-
ever, the cursor cannot be moved.
— Destination input by
“Intersection”
Touch the “Intersection” switch on
the “Destination” screen.
Input the name of the two intersecting
streets which are located near the des-
tination to be set.

xlvi
Touch the switch of the desired item. Af-
ter inputting the two intersecting streets,
the screen changes and displays the
map location of the selected destination
and the route preference. (See “ — Enter-
ing destination” on page xlviii.)
If the same two streets cross at more than
one intersection, the screen changes and
displays the menu to select the city name
where the streets intersect. Select the city,
and the map location of the selected des-
tination and the route preference. (See “ —
Entering destination” on page xlviii.)
— Destination input by
“Freeway Ent./Exit”
To input a freeway entrance or exit, touch
the
“Freeway Ent./Exit” switch on
the “Destination” screen.
Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an “I” (I−405). US high-
ways use the state designation before the
number (CA−118).

xlvii
Select the desired freeway by touching
the switch.
You can then select either a freeway“Entrance” or “Exit”.
Touch the switch of the desired entrance
or exit name. The screen changes and
displays the map location of the selected
destination and the route preference.
(See
“ — Entering destination” on page xlviii.)
“Dist. Sort”: In the order of distance from
your current position. The distance from
your current position up to the destination is
displayed on the right of the name.
“Name Sort”: In alphabetical order by
name.
“Input Name”: An applicable list is dis-
played by touching this switch and inputting
name.
— Destination input by
“Coordinates”
Touch the “Coordinates” switch on
the “Destination” screen.
Input the latitude and the longitude.
When the input is finished, touch the
“OK”switch.
When you touch the switch of the desired
point, the screen changes and displays
the map location of the selected destina-
tion and the route preference. (See “ —
Entering destination” on page xlviii.)

xlviii
— Destination input by
“Phone #”
Touch the “Phone #” switch on the
“Destination” screen.
Input a telephone number.
After inputting a telephone number,
touch the
“OK” switch, and the screen
changes and displays the map location
of the selected destination and the road
preference. (See “ — Entering destina-
tion” on page xlviii.)
If there is more than one site having the
same number, the following screen appears.
INFORMATION
If there is no match for the telephone
number inputted, a list of identical
numbers but with different area
codes will be displayed.
To set a memory point as a destina-
tion using the phone number, the
number must be registered pre-
viously. (See page lxxxiii.)
Starting route guidance —
— Entering destination
After you input the destination, the
screen changes and displays the map
location of the selected destination and
the route preference.
SCREEN A
1. When you touch an arrow facing the
desired point, the map scrolls in that
direction. When you release your finger,
scrolling stops.
2. To set the destination and display
SCREEN B, touch the
“Enter” switch.
When the destination is already set, the
“Add to ” switch and the “Replace
” switch are displayed.
“Add to
”: To add a destination.

xlix “Replace
”: To delete the existing des-
tinations and set a new one.
“Change”: To change the route preference.
(See page xlix.)
“Info.”: If this switch is displayed on the top
of the screen, touch the switch to see name,
address, and phone number, etc.
SCREEN B
3. To start guidance, touch the
“Guide” switch.
“3 Routes”: To select the desired route from
three possible routes. (See page l.)
“Route”: To change the route. (See pages
liii and lv.)
INFORMATION
Guidance can be suspended or re-
sumed. (See page lxxiii.)
If you keep touching the
“Guide”switch until a beep sounds, Demo
mode will start.
To change the route before starting
guidance
ROUTE PREFERENCE
You can change route preference by touch-
ing the
“Change” switch on SCREEN A.
You can turn the indicator on or off by
touching the switch.
When searching for a route, the system
avoids routes where the indicator is dimmed
as much as possible.
After choosing conditions, touch the
“OK” switch.

l
INFORMATION
Even if the “Allow Freeway” indi-
cator is dimmed, the route cannot
avoid including a freeway in some
cases.
If the calculated route includes a trip
by ferry, the route guidance shows a
sea route. After you travel by ferry,
the current vehicle position may be
incorrect. Upon reception of GPS
signals, it is automatically cor-
rected.
3 ROUTES SELECTION
To select the desired route from three
routes, touch the
“3 Routes” switch on
SCREEN B.
Touch the “Quick1”, “Quick2” or“Short” switch to select the desired
route.
“Quick1”: Recommended route.
This route is indicated by an orange line.
“Quick2”: Other route.
This route is indicated by a purple line.
“Short”: A route by which you can reach the
destination in the shortest distance.
This route is indicated by a green line.“Info.”: To display the following information
about each of the 3 routes.
1Time necessary for entire trip
2Distance of entire trip
3Toll road
4Freeway
5Ferry