TOYOTA LAND CRUISER 2008 J200 Navigation Manual

OTHER FUNCTIONS
141
4. Touch the desired telephone num-
ber.
5. Touch the touchscreen button you
want to register in.
The latest dialed number is registered in
the 6th item (speed redial).
If you select a touchscreen button you
registered before, this screen is dis-
played.
6. Touch “Yes” if you want to overwrite
it.
Deleting the speed dial individually
You can delete “01” “17” of the speed
dial individually.
If you delete them all at once, all of 17 num-
bers are deleted.
1. Touch “Delete” of “Speed Dial”.
2. Touch the touchscreen button you
want to delete.
3. Touch “Yes”.

OTHER FUNCTIONS
142 
Deleting all of the speed dial
1. Touch “Delete All” of “Speed Dial”.
2. Touch “Yes”.(b) Registering the speed tone
You can register the desired tone num-
ber. Up to 6 speed tone numbers can be
registered.
1. Touch “Register” of “Speed Tone”.
2. Use the software keyboard to input
the name.

OTHER FUNCTIONS
143
3. Input the number and touch “OK”.
4. Touch the desired touchscreen
button you want to register in.
If you select a touchscreen button you
register before, this screen is dis-
played.
5. Touch “Yes” if you want to overwrite
it.
Editing the speed tone
You can edit the speed tone.
1. Touch “Edit” of “Speed Tone”.
2. Touch the touchscreen button you
want to edit.

OTHER FUNCTIONS
144
3. Use the software keyboard to input
the name.
4. Input the number and touch “OK”.
Deleting the speed tone individually
You can delete “1” to “6” of the speed
tone.
If you delete them all at once, all of 6 num-
bers are deleted.
1. Touch “Delete” of “Speed Tone”.
2. Touch the touchscreen button you
want to delete.
3. Touch “Yes”.

OTHER FUNCTIONS
145 
Deleting all the speed tone
1. Touch “Delete All” of “Speed Tone”.
2. Touch “Yes”.(c) Setting the volume
1. Touch “Volume” to display the “Vol-
ume Settings” screen.
2. Touch “” or “+” to adjust the “Voice
Volume” or “Ring Volume”.
“Voice Volume” Adjusting the other . . . . . .
party’s voice.
“Ring Volume” Adjusting the ring. . . . . . .
volume.

OTHER FUNCTIONS
146 
Automatic volume settings for high
speed
You can set the volume one step up
when the speed is over 50 mph (80
km/h). (When it is under 43 mph (70
km/h), previous volume is back.)
Each time you touch “Adaptive Volume
Control”, you can switch on or off.Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”.

OTHER FUNCTIONS
147
(d) Setting the screen
1. Touch “Screen” to display the
“Screen Settings” screen.
2. Do the detail settings of the screen
and touch “OK”.
Incoming call display
You can select the method of the receiv-
ing call display.
Touch “Full” or “Icon”.
“Full” mode When a call is re-. . . . . . . .
ceived, the Hands−
free screen is dis-
played and you can
operate it on the
screen.
“Icon” mode The message is dis- . . . . . . . .
played on the upper
side of the screen.
You can only oper-
ate the steering
switch.

OTHER FUNCTIONS
148 
Auto answer
When a call is received, the display au-
tomatically changes to the talking
screen and you can start to talk on the
phone (without touching any button) af-
ter the preset time.
Touch “ON” of “Auto Answer” and “”
or “+” to adjust the waiting time of auto
answer within 1 60 seconds.
The Bluetooth connection status at
startup
When the “ENGINE START STOP”
switch is in the ACCESSORY or
IGNITION ON mode and the Bluetooth
is automatically connected, the con-
nection check is displayed.
Touch “ON” or “OFF” of “Show
Bluetooth* connection status at start-
up”.
*: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
149 
Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”.(e) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.

OTHER FUNCTIONS
150 
Transferring a telephone number
You can transfer the telephone num-
bers in your Bluetooth phone to the
system. Up to 1000 person’s data (up to
2 numbers a person) can be registered
in the phone book.
Transfer it while the engine is running.
1. Touch “Transfer” to display the “Se-
lect Group” screen.
2. Select the group you want to trans-
fer the data to.
3. Touch “Overwrite” or “Add To”.
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel”. If the transfer-
ring is interrupted on the way, the phone
book data transferred until then can be
memorized in the system.
5. When this screen is displayed, the
transfer is completed.
When this screen is displayed, try the
transfer operation again.