TOYOTA PRIUS 2010 3.G Owners Manual

Page 381 of 616

381
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Seat heaters
: If equipped
■The seat heaters can be used when
The “POWER” switch is in ON mode.
■ When not in use
Turn the seat heater off. The indicator light turns off.
Heats the left front seat
Heats the right front seat
The indicator light comes on.
ITO36P130

Page 382 of 616

382 3-6. Other interior features
PRIUS_U (OM47668U) U.S.A.
CAUTION
■Burns
● Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns:
• Babies, small children, the elderly, the sick and the disabled
• Persons with sensitive skin
• Persons who are fatigued
• Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
● Do not cover the seat with anything when using the seat heater. 
Using the seat heater with a blanket or cushion increases the temperature
of the seat and may lead to overheating.
NOTICE
■ To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp
objects (needles, nails, etc.) into the seat.
■ To prevent 12 volt battery discharge
Turn the switches off when the hybrid system is not operating.

Page 383 of 616

383
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Armrest
NOTICE
■To prevent damage to the armrest
Do not place too much strain on the armrest.
: If equipped
Pull the armrest down for use.
ITO36P111

Page 384 of 616

384
3-6. Other interior features
PRIUS_U (OM47668U) U.S.A.
Floor mats
CAUTION
■When inserting the floor mat
Observe the following precautions. 
Failure to do so may result in the floor mat slipping and interfering wi\
th the
movement of the pedals during driving, resulting in an accident.
● Make sure the floor mat is properly placed on the vehicle carpet and the
correct side faces upward.
● Do not place floor mats on top of existing mats.
Securely place a mat that matches the size of the space on the car-
pet.
Secure the floor mat using the
hooks provided.
ITO36P113

Page 385 of 616

385
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Luggage compar tment features
■Cargo hooks
Cargo hooks are provided for
securing loose items.
■ Auxiliary box
Center type A
Turn the knob to the
“UNLOCK” position and open
the lid.
Lift the center deck board.
STEP1
STEP2

Page 386 of 616

386 3-6. Other interior features
PRIUS_U (OM47668U) U.S.A.
Center type BLift the center deck board.
Side Lift the side deck board.

Page 387 of 616

387
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Removing the luggage cover
Lift it up.
■Luggage cover (If equipped)
Adjust the cover so that “TOP”
is facing upwards.
Pull out the luggage cover and
secure it to the hook brackets.
STEP1
STEP2

Page 388 of 616

388 3-6. Other interior features
PRIUS_U (OM47668U) U.S.A.
■Stowing the luggage cover (vehicles with center auxiliary box type A
only)
■ When not using the luggage cover
Place the cover in a horizontal position.
CAUTION
■When the cargo hooks are not in use
To avoid injury, always return the cargo hooks to their positions when they
are not in use.
■ While driving
Do not place anything on the luggage cover. Such items may be thrown
about and possibly injure people in the vehicle during sudden braking or an
accident.
Remove the side deck boards and
open the center auxiliary box.
Adjust the cover so that “TOP” is facing
up.STEP1
STEP2

Page 389 of 616

389
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Garage door opener
The garage door opener (HomeLink Universal Transceiver) is manufac-
tured under license from HomeLink.
Programming the HomeLink (for U.S.A. owners)
The HomeLink
 compatible transceiver in your vehicle has 3 buttons
which can be programmed to operate 3 different devices. Refer to the
programming method below appropriate for the device.
Buttons
Indicator
■ Programming the HomeLink

Point the remote control for the
device 1 to 3 in. (25 to 75 mm)
from the HomeLink
 control but-
tons.
Keep the indicator light on the
HomeLink in view while pro-
gramming.
The garage door opener can be programmed to operate garage
doors, gates, entry doors, door locks, hom e lighting systems, and
security systems, and other devices.
ITO36P12R
STEP1

Page 390 of 616

390 3-6. Other interior features
PRIUS_U (OM47668U) U.S.A.Press and hold down one of the
buttons on the HomeLink
 and
the button on the transmitter.
When the indicator light on the
HomeLink
 changes from a slow
to a rapid flash after 20 seconds,
you can release both buttons.
Test the operation of the
HomeLink
 by pressing the
newly programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and hold the programmed
HomeLink
 button. The garage
door has the rolling code feature
if the indicator light (on the
HomeLink
) flashes rapidly for 2
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the head-
ing “Programming a rolling code
system”.
Repeat the steps above to program another device for each of
the remaining HomeLink buttons.
STEP2
STEP3
STEP4

Page:   < prev 1-10 ... 341-350 351-360 361-370 371-380 381-390 391-400 401-410 411-420 421-430 ... 620 next >