display TOYOTA SEQUOIA 2008 2.G Navigation Manual

OTHER FUNCTIONS
135
(vii) By POI call
5U5051F
You can call by touching when
it is displayed on the screen from navi-
gation system. (See page 25 for de-
tails.)
5U5052F
When a call is received, this screen is
displayed with a sound. Touch
or
push the
switch of the steering
wheel to talk on the phone.
To hang up the phone:
Touch
or push the switch of
the steering wheel again.
To refuse to receive the call:
Touch
and hold it.
To adjust the volume of received call:
Touch
“–” or “+” or use the volume
switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed cor-
rectly depending on the cellular phone
which you have.
— Receive on the
Bluetooth phone

OTHER FUNCTIONS
136
5U5053F
While you are talking on the phone, this
screen is displayed. You can do the op-
eration below on the screen.
To adjust the volume of the other party’s
voice:
Touch
“–” or “+” or use the volume
switch of the steering wheel.
To hang up the phone:
Touch
or push the switch of
the steering wheel.
To mute your voice:
Touch “Mute”.
To input a Key:
Touch “09”.
To transfer the call
Touch “Transfer Call”.
You cannot change from Hands−free call
to cellular phone call while driving.
When you change from cellular phone call
to Hands−free call, the Hands−free screen
will be displayed and you can operate it on
the screen.
Transferring method and behavior are dif-
ferent depending on the cellular phone
which you have.
For the operation of the phone, see the
manual that comes with your cellular
phone.
5U5054F
Touch the desired number to input the key.
To hang up the phone:
Touch
or push the switch of
the steering wheel.
This cannot be operated while driving.
— Talk on the Bluetooth
phone

OTHER FUNCTIONS
137
5U5055F
If the continuous tone signal is regis-
tered in a phone book, this screen ap-
pears. (If not registered, “Send” and
“Exit” are not displayed.)
Confirm the number displayed on the
screen and touch “Send”. The number
before marked sign will be sent.
When you touch “Exit”, this function will
be finished and normal tone screen ap-
pears.
To hang up the phone:
Touch
or push the switch of
the steering wheel.
The continuous tone signal is the marked
sign (p or w) and the number following tele-
phone number. (ex. 056133p0123w#1
)
You can do this operation when you want
to operate an answering machine or use a
telephone service in bank for example.
You can register the phone number and
the code number in the phone book.
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see
“Registering the speed tone” on page
140.)
5U5056F
1. Touch “Speed Tone”.
5U5057F
2. Touch the desired switch to send a
tone.

OTHER FUNCTIONS
138
5U5058F
Touch “Settings” to display “Settings”
screen.
5U5059F
You can change the settings of the
phone.(a) Registering the speed dial
You can register the desired telephone
number from phone book, dialed num-
bers and received calls. Up to 17 speed
dial numbers can be registered.
The 6th entry is the speed dial for redialing.
5U5060F
1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.
5U5061F
2. Touch “Register” of “Speed Dial”.
5U5062F
3. Select the data you want to register.
— Change the settings of
the Bluetooth phone

OTHER FUNCTIONS
139
5U5063F
4. Touch the desired telephone num-
ber.
5U5064F
5. Touch the touchscreen button you
want to register in.
The latest dialed number is registered in
the 6th item (speed redial).
5U5065F
6. If you select a touchscreen button
you registered before, this screen is
displayed.
Touch “Yes” if you want to overwrite it.
Deleting the speed dial individually
You can delete “01” “17” of the speed
dial individually.
If you delete them all at once, all of 17 num-
bers are deleted.
5U5066F
1. Touch “Delete” of “Speed Dial”.
5U5067F
2. Touch the touchscreen button you
want to delete.
5U5068F
3. Touch “Yes”.

OTHER FUNCTIONS
143 
Deleting all the speed tone
5U5083F
1. Touch “Delete All” of “Speed Tone”.
5U5084F
2. Touch “Yes”.(c) Setting the volume
5U5085F
1. Touch “Volume” to display the
“Volume Settings” screen.
5U5086F
2. Touch “” or “+” to adjust the “Voice
Volume” or “Ring Volume”.
Voice Volume Adjusting the other. . .
party’s voice.
Ring Volume Adjusting the ring vol-. . . .
ume.

OTHER FUNCTIONS
145
(d) Setting the screen
5U5089F
1. Touch “Screen” to display the
“Screen Settings” screen.
5U5090F
2. Do the detail settings of the screen
and touch “OK”.
Incoming Call Display
You can select the method of the receiv-
ing call display.
5U5091F
Touch “Full” or “Icon”.
Full mode
When a call is received, the . . . . . . . .
Hands−free screen is displayed
and you can operate it on the
screen.
Icon mode
The message is displayed on the . . . . . . . .
upper side of the screen. You can
only operate the steering switch.

OTHER FUNCTIONS
146 
Auto answer
When a call is received, the display au-
tomatically changes to the talking
screen and you can start to talk on the
phone (without touching any switch) af-
ter the preset time.
5U5092F
Touch “ON” of “Auto Answer” and “”
or “+” to adjust the waiting time of auto
answer within 1 60 seconds.
The Bluetooth connection status
at startup
5U5093F
When the engine switch is turned to the
ACC or ON position and the Bluetooth
is automatically connected, the con-
nection check is displayed.
5U5094F
Touch “ON” or “OFF” of “Show
Bluetooth∗ connection status at
startup”.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
147 
Initializing the settings
You can initialize the settings.
5U5095F
Touch “Default”.
5U5096F
Touch “Yes”.(e) Setting the phone book
You can register phone numbers in the
phone book.
5U5097F
Touch “Phone Book” to display the
“Phone Book Management” screen.
5U5098F
You can do the detail settings of phone
book.

OTHER FUNCTIONS
148 
Transferring a telephone number
You can transfer the telephone num-
bers in your Bluetooth
 phone to the
system. Up to 1000 person’s data (up to
2 numbers a person) can be registered
in the phone book.
Transfer it while the engine is running.
5U5099F
1. Touch “Transfer Data” to display
“Select Group” screen.
5U5100F
2. Select the group you want to trans-
fer the data to.
5U5101F
3. Touch “Overwrite” or “Add To”.
5U5102F
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel”. If the transfer-
ring is interrupted on the way, the phone
book data transferred until then can be
memorized in the system.
5U5103F
5. When this screen is displayed, the
transfer is completed.
5U5104F
When this screen is displayed, try the
transfer operation again.