TOYOTA SIENNA 2007 XL20 / 2.G Navigation Manual

Page 121 of 224

111
Dialing by phone number
You can call by giving a desired number.
You: Push the talk switch.
System: “After the beep, please say the
number.”
You: “812387”
System: “When ready, please briefly push
the talk switch or push the
off−hook switch to dial.”
You: Push the talk switch.
System: “After the beep, please continue to
add numbers or say “Dial”.”
You: “Dial.”
System: “Dialing the number.”
Now you are calling 812387.
Sending a tone
You can send a tone by giving a desired
number.
You: Push the talk switch.
System: “Say numbers, pound, or star.”
You: “1234.”
System: “1234.” “Push the talk switch.”
You: Push the talk switch.
System: “Send? Say Yes or No.”
You: “Yes.”
System: “Sending.”
Now you are sending the tone.(vii) By POI call
You can call by touching when it is
displayed on the screen from Navigation
system. (See page 11 for details.)

Page 122 of 224

11 2
(c) Receive on the Bluetooth
phone
When a call is received, this screen is dis-
played with a sound. Touch
or push
the
switch of the steering wheel to talk
on the phone.
To hang up the phone:
Touch
or push the switch of the
steering wheel again.
To refuse to receive the call:
Touch
and hold it.
To adjust the volume of received call:
Touch
“–” or “+” or use the volume
switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed correctly
depending on the cellular phone which you
have.
(d) Talk on the Bluetooth phone
While you are talking on the phone, this
screen is displayed. You can do the opera-
tion below on the screen.
To adjust the volume of the other party’s
voice:
Touch
“–” or “+” or use the volume
switch of the steering wheel.
To hang up the phone:
Touch
or push the switch of the
steering wheel.
To mute your voice:
Touch “Mute”.
To input a Key:
Touch “09”.
To transfer the call
Touch “Transfer Call”.You cannot change from Hands−free call to
cellular phone call while driving.
When you change from cellular phone call to
Hands−free call, the Hands−free screen will
be displayed and you can operate it on the
screen.
Transferring method and behavior are differ-
ent depending on the cellular phone which
you have.
For the operation of the phone, see the manu-
al that comes with your cellular phone.

Page 123 of 224

11 3
Touch the desired number to input the key.
To hang up the phone:
Touch
or push the switch of the
steering wheel.
This cannot be operated while driving.
If the continuous tone signal is registered
in a phone book, this screen appears. (If
not registered, “Send” and “Exit” are not
displayed.)
Confirm the number displayed on the
screen and touch “Send”. The number be-
fore marked sign will be sent.
When you touch “Exit”, this function will be
finished and normal tone screen appears.
To hang up the phone:
Touch
or push the switch of the
steering wheel.
The continuous tone signal is the marked sign
(p or w) and the number following telephone
number. (ex. 056133p0123w#1
)You can do this operation when you want to
operate an answering machine or use a tele-
phone service in bank for example. You can
register the phone number and the code num-
ber in the phone book.

Page 124 of 224

11 4
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see “Reg-
istering the speed tone” on page 117.)
1. Touch “Speed Tone”.
2. Touch the desired switch to send a
tone.
(e) Change the settings of the
Bluetooth phone
Touch “Settings” to display “Settings”
screen.
You can change the settings of the phone.(i) Registering the speed dial
You can register the desired telephone
number from phone book, dialed numbers
and received calls. Up to 17 speed dial
numbers can be registered.
The 6th entry is the speed dial for redialing.
1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.

Page 125 of 224

11 5
2. Touch “Register” of “Speed Dial”.
3. Select the data you want to register.
4. Touch the desired telephone number.
5. Touch the touchscreen button you
want to register in.
The latest dialed number is registered in the
6th item (speed redial).
6. If you select a touchscreen button you
registered before, this screen is dis-
played.
Touch “Yes” if you want to overwrite it.

Page 126 of 224

11 6
Deleting the speed dial individually
You can delete “01” “17” of the speed
dial individually.
If you delete them all at once, all of 17 num-
bers are deleted.
1. Touch “Delete” of “Speed Dial”.
2. Touch the touchscreen button you
want to delete.
3. Touch “Yes”.
Deleting all of the speed dial
1. Touch “Delete All” of “Speed Dial”.
2. Touch “Yes”.

Page 127 of 224

11 7 (ii) Registering the speed tone
You can register the desired tone number.
Up to 6 speed tone numbers can be regis-
tered.
1. Touch “Register” of “Speed Tone”.
2. Use the software keyboard to input the
name.
3. Input the number and touch “OK”.
4. Touch the desired touchscreen but-
ton you want to register in.
5. If you select a touchscreen button you
register before, this screen is displayed.
Touch “Yes” if you want to overwrite it.

Page 128 of 224

11 8
Editing the speed tone.
You can edit the speed tone.
1. Touch “Edit” of “Speed Tone”.
2. Touch the touchscreen button you
want to edit.
3. Use the software keyboard to input the
name.4. Input the number and touch “OK”.

Page 129 of 224

11 9
Deleting the speed tone individually.
You can delete “1” to “6” of the speed
tone.
If you delete them all at once, all of 6 numbers
are deleted.
1. Touch “Delete” of “Speed Tone”.
2. Touch the touchscreen button you
want to delete.
3. Touch “Yes”.
Deleting all the speed tone
1. Touch “Delete All” of “Speed Tone”.
2. Touch “Yes”.

Page 130 of 224

120 (iii) Setting the volume
1. Touch “Volume” to display the “Vol-
ume Settings” screen.
2. Touch “” or “+” to adjust the “Voice
Volume” or “Ring Volume”.
Voice Volume Adjusting the other party’s. .
voice.
Ring Volume Adjusting the ring volume.. . .
Automatic volume settings for high
speed
You can set the volume one step up when
the speed is over 80 km/h. (When it is un-
der 70 km/h, previous volume is back.)
Each time you touch “Adaptive Volume
Control”, you can switch on or off.Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”.

Page:   < prev 1-10 ... 81-90 91-100 101-110 111-120 121-130 131-140 141-150 151-160 161-170 ... 230 next >