TOYOTA SIENNA 2009 XL20 / 2.G Owners Manual

371
3-6. Using the
storage features
3
Interior features
Type D (if equipped)
Raise the table if it is folded
down.
Open the lid and pull down the
tab on the back of the lid.
Type E (if equipped)
STEP1
STEP2
Cup holders

372 3-6. Using the storage features
Type F (if equipped)Press down the lever.
Type G (if equipped) Remove the console box. ( P. 366)
Pull down the cup bottom to
extend them (the cup holder is
stored in the console box). Turn
them clockwise to lock.
To install the cup holder, hook it
onto the outer edge of the con-
sole box installation base, then
push down on the opposite end
to secure it.
STEP1
STEP2
STEP3
Cup holders

373
3-6. Using the
storage features
3
Interior features
■When the cup holders of type C and D are not in use (if equipped)
CAUTION
■When installing the cup holder of type G (if equipped)
Make sure that the cup holder is securely installed by pushing it back and
forth, upward and sideways. Failure to do so may result in serious injury in
the event of sudden braking or a collision.
■ Items unsuitable for the cup holder
Do not place anything other than cups or aluminum cans in the cup holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury. If possible, cover hot drinks to prevent
burns.
■ When not in use
Type A, type D (if equipped) and type F (if equipped): Keep the cup holders
closed.
Type C and D (if equipped): Make sure the table is folded down and locked
securely.
Type G (if equipped): Keep the cup holders stowed.
Injuries may result in the event of an accident or sudden braking.
Pull up the lever and push against the
driver’s seat side.
Cup holders

374 3-6. Using the storage features
Bottle holdersFront
Rear
CAUTION
■Items unsuitable for the bottle holder
Do not place anything other than a bottle in the bottle holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury.
NOTICE
■When stowing a bottle
Put the cap on before stowing a bottle. Do not place open bottles in the bot-
tle holders. The contents may spill.
Bottle holders

375
3-6. Using the
storage features
3
Interior features
Auxiliary boxes
Type A Push the button and pull down
the box.
Type B Push the button.
Type C Pull up the lever and open the
box.
Auxiliary boxes

376 3-6. Using the storage features
Type DLift the lid.
Type E Pull up the lever and lift the lid.
Type F (if equipped) Press in and release the lid to
open.
Auxiliary boxes

377
3-6. Using the
storage features
3
Interior features
Type G (if equipped)
Press in and release the lid to
open.
Type H (if equipped) Press down the lever.
Type I (if equipped) Raise the table if it is folded
down.
STEP1
Auxiliary boxes

378 3-6. Using the storage features
Open the lid.STEP2
■Changing the position of the partition in the auxiliary box of type G (if
equipped)
The partition can be moved as shown in the illustration.
■ When the auxiliary box of type I is not in use (if equipped)
Pull out the partition and place it in the
desired position as following illustration.
Pattern A
Pattern B
Pull up the lever and push against the
driver’s seat side.
Auxiliary boxes

379
3-6. Using the
storage features
3
Interior features
CAUTION
■Items that should not be left in the auxiliary box (type A)
Do not leave glasses or lighters in the auxiliary box.
If the interior of the vehicle becomes hot, lighters may explode and glasses
may warp or become cracked.
■ Items unsuitable for storing (type A)
Do not place any heavy objects in them.
Doing so may cause the auxiliary box to open and the items inside may fall
out, resulting in an accident.
■ Caution while driving
Keep the auxiliary boxes closed.
Injuries may result in the event of an accident or sudden braking.
■ When not in use
Type I (if equipped): Make sure the table is folded down and locked securely.
Injuries may result in the event of an accident or sudden braking.
Auxiliary boxes

380 3-6. Using the storage features
Trays (if equipped)Under the front passenger’s seat Lift the tray and pull it forward.
Between the front seats Remove the console box. ( P. 366)
To install the tray (the tray is
stored in the console box), hook
it onto the outer edge of the con-
sole box installation base, then
push down on the opposite end
to secure it.
STEP1
STEP2
Trays