TOYOTA YARIS 2019 Owners Manual (in English)

YARIS SEDAN_OM_OM99S50z_(U)
1513-1. Start/Stop Engine
3
When Driving
If the engine cannot be started due to a dead key battery, the engine
can be started using the following procedure:
Continue to depress the brake pedal firmly until the engine has
completely started.
Manual transaxle:
Continue to depress the clutch p edal firmly until the engine has
completely started.
Make sure that the push button start indication light (green) f lashes.
The push button start indicator light (green) will flash even if the push but-
ton start is pressed before depressing the clutch pedal (manual transaxle)
or the brake pedal (automatic transaxle). If the clutch pedal i s depressed
(manual transaxle) or the brake pedal is depressed (automatic transaxle)
under this condition, the engine can be started by resuming the procedure
following this.
Touch the push button start
using the backside of the key
(as shown) while the push but-
ton start indicator light (green)
flashes.
When touching the push button
start using the backside of the key
as shown in the illustration, touch
the push button start with the lock
switch side of the key facing up.
Make sure that the push button start indicator light (green) tu rns on.
Press the push button start to start the engine.
● The engine cannot be started unless the clutch pedal is fully d epressed
(manual transaxle) or the brake pedal is fully depressed (autom atic tran-
saxle).
● If there is a malfunction with the push button start function, the push button
start indicator light (amber) flashes. In this case, the engine may start, how-
ever, have the vehicle checked at your Toyota dealer as soon as possible.
● If the push button start indicator light (green) does not illuminate, perform
the operation from the beginning again. If it does not illumina te, have the
vehicle checked at your Toyota dealer.
● To switch the ignition position without starting the engine, perform the follow-
ing operations after the push button start indicator light (gre en) turns on.
Release the clutch pedal (manual transaxle) or brake pedal (aut omatic
transaxle).
Engine Start Function Wh en Key Battery is Dead
1
2
3
Smart Key
Indicator light
Push button start
Q
R
S
N

152
YARIS SEDAN_OM_OM99S50z_(U)
3-1. Start/Stop Engine
Press the push button start to switch the ignition position. The ignition
switches in the order of ACC, ON, and off each time the push button start
is pressed. To switch the ignition position again, perform the operation
from the beginning.
If the KEY warning lig ht (red) illuminates, or the push button start indi-
cator light (amber) flashes, thi s could indicate that the engin e may not
start using the usual starting method. Have your vehicle inspec ted at
your Toyota dealer as soon as possible. If this occurs, the eng ine can
be force-started. Press and hold the push button start until th e engine
starts. Other procedures necessary for starting the engine such as
having the key in the cabin, and depressing the clutch pedal (m anual
transaxle) or the brake pedal (automatic transaxle) are require d.
NOTICE
When starting the engine by holding the smart key over the push button
start due to a dead key battery or a malfunctioning key, be careful not to
allow the following, otherwise the signal from the key will not be received
correctly and the engine may not start.
● Devices for electronic purchases, or security passage touch or come near
the key.
Emergency Operation for Starting the Engine
2
● Metal parts of other keys or metal
objects touch the key.
● Spare keys or keys for other vehicles
equipped with an immobilizer system
touch or come near the key.

153
YARIS SEDAN_OM_OM99S50z_(U)
3-1. Start/Stop Engine
3
When Driving
Turning the Engine Off
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to th e P position and set the parking brake.
Press the push button start to turn off the engine. The ignitio n posi-
tion is off.
● The cooling fan in the engine compartment could turn on for a f ew minutes
after the ignition is switched from ON to OFF, whether or not the A/C is on or
off, to cool the engine compartment quickly.
● When the push button start is pressed from ON to ACC or OFF, th e KEY
indicator light (green) may flash for approximately 30 seconds indicating
that the remaining battery power of the key is low.
Replace with a new battery before the key becomes unusable.
Refer to Key Battery Replacement on P. 456.
● Automatic transaxle:
If the engine is turned off while the selector lever is in a po sition other than
P, the ignition switches to ACC.
Continuously pressing the push button start or quickly pressing it two
or more times while the engine is running or the vehicle is bei ng
driven will turn the engine off immediately. The ignition switc hes to
ACC.
WARNING
■ Do not stop the engine while the vehicle is moving
Stopping the engine while the vehicle is moving for any reason other than in
an emergency is dangerous. Stopping the engine while the vehicl e is mov-
ing will result in reduced braking ability due to the loss of power braking,
which could cause an accident and serious injury.
NOTICE
When leaving the vehicle, make sure the push button start is off.
Emergency Engine Stop
1
2
3

154
YARIS SEDAN_OM_OM99S50z_(U)
3-2. Combination Meter and Display
Meters and Gauges
◆Combination meterSpeedometer ( P. 154)
Dashboard Illumination
(  P. 158)
Odometer, Trip Meter and
Trip Meter Selector
(  P. 155)
Fuel Gauge ( P. 157)
Outside Temperature Dis-
play ( P. 1 5 9 )
Tachometer ( P. 157)
◆Steering Switch (if equipped)
Trip Computer and INFO
Switch ( P. 160)
The speedometer indicates the speed of the vehicle.
If a few seconds have elapsed after switching the ignition off, the needle may
deviate. However, this does not indicate a problem.
1
2
3
4
5
6
1
Speedometer

YARIS SEDAN_OM_OM99S50z_(U)
1553-2. Combination Meter and Display
3
When Driving
The display mode can be changed from odometer to trip meter A to
trip meter B and then back to odometer by pressing the selector while
one of them is displa yed. The selected mode will be displayed.
Odometer
Trip meter A
Trip meter B
Odometer, Trip Meter and Trip Meter Selector
Press the selector
Press the selector
Press the selector
1
2
3

156
YARIS SEDAN_OM_OM99S50z_(U)
3-2. Combination Meter and Display
■Odometer
The odometer records the total distance the vehicle has been
driven.
■Tr i p m e t e r
The trip meter can record the to tal distance of two trips. One is
recorded in trip meter A, and the other is recorded in trip met er B.
For instance, trip meter A can re cord the distance from the point of
origin, and trip meter B can record the distance from where the fuel
tank is filled.
When trip meter A is selected, pressing the selector again with in
one second will change to trip meter B mode.
When trip meter A is selected, TRIP A will be displayed. When t rip
meter B is selected, TRI P B will be displayed.
The trip meter records the total distance the vehicle is driven until
the meter is again reset. Return it to “0.0” by depressing and hold-
ing the selector for one second or more. Use this meter to meas ure
trip distances and to com pute fuel consumption.
■Odometer, Trip Meter and Trip Meter Selector
When the ignition is switched to ACC or off, the odometer or trip meters can-
not be displayed, however, pressing the selector can inadverten tly switch the
trip meters or reset them duri ng an approximate ten-minute peri od in the fol-
lowing cases:
● After the ignition is switched to off from ON.
● After the driver’s door is opened.
■ Trip meter
●Vehicles with type B audio:
If TRIP A is reset using the trip meter when the function which synchronizes
(resets) the fuel economy monitor and the trip meter (TRIP A) i s on, the fuel
economy data resets in conjunction with TRIP A.
Refer to Fuel Economy Monitor on P. 210.
● Only the trip meters record tenths of miles (kilometers).
● The trip record will be erased when:
• The power supply is interrupted (blown fuse or the battery is discon-
nected).
• The vehicle is driven over 9999.9 mile (km).

YARIS SEDAN_OM_OM99S50z_(U)
1573-2. Combination Meter and Display
3
When Driving
The tachometer shows engine speed in thousands of revolutions per
minute (rpm).
Striped zone
*1
Red zone*1
*1: The range varies depending on thetype of gauge.
When the tachometer needle enters the STRIPED ZONE, this indicates to the
driver that the gears should be shifted before entering the RED ZONE.
The fuel gauge shows approximately how much fuel is remaining i n
the tank when the ignition is sw itched ON. We recommend keeping
the tank over 1/4 full.
Full
1/4 Full
If the low fuel warning light illuminates or the fuel level is very low,
refuel as soon as possible.
Refer to Warning/Indi cator Lights on P. 162.
Tachometer
1
2
NOTICE
Do not run the engine with the tachometer needle in the RED ZON E. This
may cause severe engine damage.
Fuel Gauge
1
2

158
YARIS SEDAN_OM_OM99S50z_(U)
3-2. Combination Meter and Display
●After refueling, it may require some time for the indicator to stabilize. In addi-
tion, the indicator may deviate while driving on a slope or cur ve since the
fuel moves in the tank.
● The display indicating a quarter or less remaining fuel has mor e segments
to show the remaining fuel level in greater detail.
● The direction of the arrow ( ) indicates that the fuel-filler lid is on the left
side of the vehicle.
When the position lights are turned on with the ignition switch ed ON,
the brightness of the instrument panel illumination is dimmed.
When the position lights are turned on, the position lights ind icator light in
the combination meter turns on.
Refer to Headlights on P. 181.
The brightness of the instrument panel and dashboard illuminati ons
can be adjusted by rotating the knob.
Dim
The brightness decreases by rotat-
ing the knob to the left. A beep
sound will be heard when the knob
has been rotated to the maximum
dim position.
Bright
The brightness increases by rotat-
ing the knob to the right.
■
Function for cancelling illumination dimmer
The illumination dimmer can be canceled by rotating the dashboa rd
illumination knob to the right u ntil a beep sound is heard while the
combination meter is dimmed wi th the ignition switched ON. If the
combination meter’s visibility is reduced due to glare from sur -
rounding brightness, cancel the illumination dimmer.
● When the illumination dimmer is canceled, the combination meter cannot be
dimmed even if the position lights are turned on.
● When the illumination dimmer is canceled, the screen in the center display
switches to constant display of the daytime screen.
Dashboard Illumination
1
2

YARIS SEDAN_OM_OM99S50z_(U)
1593-2. Combination Meter and Display
3
When Driving
When the ignition is switched ON,
the outside temperature is dis-
played.
■Changing the Temperature Unit of the Outside Temperature
Display (Vehicles with Type B audio)
The outside temperature unit can be switched between Celsius and
Fahrenheit. Settings can be changed by operating the center dis -
play screen.
Refer to Customizabl e Features on P. 584.
●Under the following conditions, the outside temperature display may differ
from the actual outside temperature depending on the surroundings and
vehicle conditions:
• Significantly cold or hot temperatures.
• Sudden changes in outside temperature.
• The vehicle is parked.
• The vehicle is driven at low speeds.
● When the temperature unit indicated in the outside temperature display is
changed, the temperature unit indicated in the engine coolant g auge display
changes in conjunction with it.
Outside Temperature Display

160
YARIS SEDAN_OM_OM99S50z_(U)
3-2. Combination Meter and Display
The following information can be selected by pressing the INFO
switch with the ignition switched ON.
• Distance-to-empty mode
• Average fuel economy mode
• Current fuel economy mode
• Average vehicle speed
If you have any problems with your trip computer, consult your To y o t a
dealer.
■Distance-to-empty mode
The distance-to-empty will be cal culated and displayed every sec-
ond.
■Average fuel economy mode
The average fuel economy is calculated and displayed every
minute.
To clear the data being displayed, press the INFO switch for mo re
than 1.5 seconds or longer.
After resetting the data, - - - mpg (- - - L/100 km) is displayed for
one minute before the fuel econom y is recalculated and displayed.
Trip Computer and INFO Switch
This mode displays the approximate distance
you can travel on the remaining fuel based on
the fuel economy.
This mode displays the average fuel economy
by calculating the total traveled distance and
the total fuel consumption since the vehicle
was purchased or the past data was reset.