change time AUDI A4 1998 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual

39-172


Checking measurements
Notes:
Pinion shaft with shim S3 installed Differential with shims S1 + S2 installed
- Turn differential 5 turns in both directions to settle tapered roller
bearings.
- Measure backlash four times on circumference.
Specifications: 0.12-0.22 mmIf the backlash lies outside the tolerance, the adjustment must be
repeated, but the total shim thickness Stotal must remain unchanged. The individual measurements must not differ by more than 0.06 mm
from each other.
Pa
ge 31 of 31 Final drive
gear set, recommended se
quence for ad
justin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.18