tailgate AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual

70-98


Trim (Avant)

Tailgate trim, removing and installing


Note:
When installing the lower trim, guide bars must be inserted in upper trim. - Remove bolt -1-.
- Tightening torque: 1.2 Nm (10 in. lb)
- Unclip lower tailgate trim -2-.
- Unclip upper tailgate trim -3-.
Pa
ge 1 of 9 Trim
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.10

70-102

Left and right-side trim, removing and
installing


- Remove side panel page 72
-75
.

- Remove tailgate seal in area of loading
edge/side panels.

- Remove loading edge page 70
-103
.

- Lift front edge of cover for seat belts and
unclip.

- Lift up cover for latch bracket for rear
backrest.

- Remove cap.
Disassembling tie-down page 70
-104
.

Installation is the reverse of removal. - Remove bolts (arrow).
Tightening torque: 1.5 Nm (13 in. lb)
- Unclip side trim and pull up and over belt guide and latch bracket.
- If changing completely, disassemble seat belt webbing underneath rear
seat.
Pa
ge 6 of 9 Trim
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.10

70-103

Rear panel trim, removing and installing


- Remove tailgate seal in area near trim.

- Remove bolts (2x).

Tightening torque: 1.5 Nm (13 in. lb)

Note:
When installing, install centering drifts in locating holes and position
retaining clips properly. - Remove rear panel trim upward.
Pa
ge 7 of 9 Trim
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.10