ABS AUDI A5 COUPE 2012 Owners Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2012, Model line: A5 COUPE, Model: AUDI A5 COUPE 2012Pages: 316, PDF Size: 78.59 MB
Page 16 of 316

14 Instrum ent s and w arn ing /indic ato r light s
I
Electronic Stabilization Program
(ESP)
¢page 15
USA model s:
Safety systems
¢page 15
Canada model s:
Safety systems
¢page 15
[a
Tire pressure too low*
¢page 16
-
•
Left turn signal
¢page 16
Safety belt
¢page 16
g
Malfunction Indicator Lamp
(MIL)
¢page 16
•
High beam
¢page 16
a
Right turn signal
¢page 16
om
USA model s:
Cruise control activated
¢page 16
•
Canada models :
Cruise control activated
¢page 16
~
USA mod els: Anti-lock brake
system (ABS) defective
¢page 16
[IJ
Canada models : Anti-lock brake
system (ABS) defective
¢page 16
USA model s: Parking brake
¢page 17
Canada models : Parking brake
¢page 17
USA mod els: Brake malfunction
¢ page 18
Canada models : Brake malfunc
tion
¢page 18
In vehicles with adaptive cru ise cont ro l* addi
t iona l indicator lights are displayed
¢page 107.
A WARNING ~
-Failure to heed warning lights and other
important vehicle information may resu lt
in ser ious personal injury or vehicle dam
age.
- Whenever stalled or stopped for repair, move the vehicle a safe d istance
off the
road, stop the engine, and turn on the
emergency flasher
¢ page 52.
- The engine compartment of any motor
veh icle is a potentially hazardous area.
Before you check anything in the engine
compa rtment, stop the engine and let it
coo l down. Always exe rcise ex treme cau
tion when wo rking under the hood
¢ page 230, Engine compartment .
(D Tips
Many functions are monitored by the Auto
Check system
¢ page 28 . Malfunctions
or faults will be i den tified either wi th a re d
symbol (priority 1 -Danger!) or with a yel
l ow symbo l (priority
2 - Warning).
~ Dynamic steering
Applies to vehicles: with Audi drive select
If the ,-w j indicator light illuminates when
switching on the ign it ion and goes o ut w hen
the engine starts, dynamic steering is activat ed .
If the ,-w j indicator light illuminates after the
engine starts, a system ma lfunction has oc
curred. You can continue to drive carefully at a .,,.
Page 17 of 316

Instrument s and warnin g/indic ator ligh ts 15
reduced speed to a qualified workshop. Steer
ing can be more difficult or sensitive than usu
a l. The steering wheel may also be at an ang le
when dr iving stra ight.
_&. WARNING
Have the dynamic steering system mal
function repaired as soon as poss ible by an
authorized Audi dealer or any qualified
workshop -risk of accident!
@ Tips
- If the ,'2:"J indicator light flashes, dynam ic
steering is being re-initialized. The driver
i nformat ion system display shows the
words "Dynamic steering: initialization"
¢ page 34.
- The dynamic steering stability systems
are not available in the event of a system
malfunction.
EPC Electronic power control
This warning/indicator light monitors the
electronic power control.
The ~ warn ing/indicator light (Electronic
Powe r Control) illuminates when you turn o n
the ignition as a function check.
(D Tips
If th is warning/indicator light illuminates
while you are dr iving, then the re is a mal
function in the engine elect ron ics. Have
the malfunction corrected as soon as pos
sible by you r autho rized Aud i dea le r o r
qua lified workshop .
J;. ID Electronic stabilization program
(ESP)
If the Jjj indicator lamp blinks while dr iv ing,
the ESP or ASR (Ant i- Slip Regulation) is active
ly regulating .
If the
D] i ndicator lamp ill uminates, the sys
tem has switched the ESP off. I n this case, you
can switch the ignition off and then on to
switch the ESP on again . The system is func- tion
ing comp lete ly when the indicator lamp
switches off.
If t he I ind icator lamp illum inates, the ESP
was switched off w ith the
I~ O FF I button.
Stabili sation program and ABS fault ! See
owner' s manual
If the Ii] indicator lamp a nd the ti] ABS indi
cator lamp illum inate and the driver message
appears, the ABS or electro nic different ia l lock
is malfunct io ni ng . This a lso inte rrupts the
E S P. The brakes s till function with their nor
mal power, but ABS is not active.
D rive to your author ized A udi dealer immedi
ate ly to have the ma lfunction corrected .
Fo r more information about the ESP
¢ page 204.
tli I !.Jr Safety systems
T he I (USA mode ls)/ . (Canada mode ls) i n
di ca tor light mon itors the safety systems e .g.
airbags, pretens ione rs and illuminates fo r a
f ew seconds each time you switch the ignit ion
on .
If the I (USA models) /. (Canada models)
indica to r ligh t does not go o ut, or if it ill umi
na tes while you are driving, o r if i t starts to
blink, then there is a malfunction somewhe re
in the system. If the light does not i lluminate
when you switch the ign ition on, th is also
means there is a malfunct ion.
_&. WARNING
If you have a ma lfunction in the safety sys
tems, contact your authorized Audi dea ler
immediately . Othe rwise the safety sys
tems may not work properly in an ac ci
d ent.
Page 18 of 316

16 Instruments and warning/indicator lights
(l) Tire pressure monitoring system -
telltale indicator lamp
A ppl ies to vehicles: with tire pressure monit oring sys te m
The warning/indicator light appears in the
event of a significant loss of air pressure.
The ti) warning/ind icator light illuminates for
a few seconds after the ignit ion is turned on
as function check, and then goes out.
If the
(g symbol appears, pressure is too low
in at least one tire.
When the system detects a ma lfunction, the
warning/indicator light will flash for approx i
mately one minute and then remain continu
ously illum inated. Th is sequence will continue
upon subsequent vehicle starts up as long as
the ma lfunction ex ists. Contact your author
ized Audi dealer and have the malfunction
corrected .
For more informat ion
c::> page 2 71 .
¢i 9 Turn signals
The indicator light blinks when you use either
turn signal .
Whenever you use the left B or the right II
turn signal, the indicator light blinks. When
you use the emergency flashers , both indica
tor lights flash .
If one of the turn signal light bulbs burn out,
the turn signal will blink tw ice as fast as nor
mal.
~ Safety belts
This warning/indicator light reminds you to
put on your safety belt.
The . warning/ indicator light illum inates
when the ignition is switched on to remind
the dr iver and (on USA models only) any front
passenger to put on the safety belt. Add ition
a lly, an audible warning tone will a lso sound.
For more Information
c::> page 154, Safety
belt warning light.
o Malfunction Indicator Lamp (MIL)
The Ma lfunction Indicator Lamp (MIL) is part
of the On-Board Diagnostic (OBD II) system.
The
fcj symbol lights up when the ign ition is
turned on and will turn off after the engine
has started and has settled at a constant idle
speed. This indicates that the MIL is work ing
proper ly.
The warning light illuminates when there is a
malfunction in the engine electronic system.
Contact your authorized Audi dea ler and have
the malfunction corrected.
For more information
c::> page 26.
~D High beam
The II warning/indicator light illuminates
when the high beams are on or when you use
the headlight flasher. For more information
about using the high beams, see
c::> poge 52.
CRUISE/ (,)" Cruise control
Them! (USA models)/ . (Canada models)
warning/indicator light illuminates when the
cruise control is activated .
ABS/ (9) Anti-lock brake system (ABS)
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL).
The warn ing/indicator light r4iS (USA mod
els)!Ei] (Canada models) will come on for a
few seconds when the ignition is switched on.
T he light will go out after an automatic check
sequence is completed.
There is a malfunction in the ABS when:
-The warning/indicator light does not i llum i
nate when you switch on the ignition .
- The warning/indicator light does not go out
after a few seconds.
- The warning/indicator light illuminates
while driving.
The brake system will still respond even
without the assistance of the ABS system.
Page 19 of 316

Instruments and warning/indicator lights 17
See your authorized Audi dealer a s soon as
po ssible to restore full braking performance.
For mo re in format ion regarding the ABS
c:> page208.
The ABS warning light and the b rake warn
ing light come on together. The ABS will not
work and you will notice a change in braking response and performance.
Malfunction in the brake system
If the b rake warn ing lig ht <=:> page 18 and
the ABS wa rn ing illumina te
together there
may be a ma lf u nction in the ABS, an d there
may a lso be a malf unct ion in the brake system
itself
c:> ,&. .
In t he event o f a malfunction in the brake
system
the warn ing/indicato r light _
(USA
models) ,11 (Canada models) in the in
strument cluster flashes. By pressing the
! SE T!
b utton, you can bri ng up a dr iver message
which expla ins the ma lfu ncti on in more de
tail. Please note
c:> page 30 .
Malfunction in the electronic differential
lock (EDL)
The EDL works toget her with the ABS . The
A BS warning ligh t will come on if the re is a
malfunc tion in the EDL system
c:> page 205 .
See your au tho riz ed A ud i deale r as so on as
po ssib le.
.&_ WARNING
- If the m (U SA mode ls)/ 11] (Canada
mode ls) warn ing light does not go o ut,
o r if it comes o n while driving, the ABS
system is not working prope rly. The veh i
cle can then be stopped only with the
standard brakes (without ABS). You will
not have the protection ABS provides .
Contact you r autho riz ed Aud i d ea le r as
soo n as poss ible.
- USA models: If the - warning ligh t
and
t h e m warning ligh t come on to
ge ther, the rear w heels could loc k up
firs t un der har d b ra king. Rear wheel l ock
up c an c ause loss o f vehicle con trol an d
an acc iden t. H ave your ve hicle re paired
-
immed iate ly by yo ur autho rize d Au di
dea le r o r a qua lified w ork shop. Drive
slowly and avo id sudden, hard brake a p
plications.
- Canada models: If the brake warning
light . and the ABS war ning light
li]
come on togethe r, th e rear whe els could
loc k up firs t und er hard braking. Rear
wheel lock -up can caus e loss o f vehicle
con trol and an a ccide nt. Have yo ur vehi
cle re pa ire d imme diately by your author
i z ed A udi d ealer o r a qu alifie d wor ksh op.
D rive s low ly and avoid s udden, hard
brake applications .
:ru I<®> Electromechanical parking brake
The warning/indicator light monitors the
elec tromechanical parking brake.
Wi th t he pa rking brake applied and the igni
tio n tu rn e d on, the. (US A
models) ,11 (C an
ad a models) warn ing/indi cator lig ht ill umi
nates . After the ignition has been t urne d off,
the wa rn ing/ indicato r light cont inues to ill u
minate for about 30 seconds . If the parking
brake is applied w ith the ign ition t urned off,
the war ning/ indicato r light illum inates for
abo ut 30 seconds .
The wa rning/indicator light wi ll go out when
the pa rking bra ke is re leased .
If the warning/indicator light flas hes continu
o us ly
after applying the parking bra ke, brak
ing fo rce is not s uff icient to prevent the vehi
cle from rolling unintentionally . Please note
the followi ng:
- If the slo pe of the ground is too steep to
park the vehicle, the addit ional drive mes
sage appea rs
Caution : Vehicle parked too
steep .
- In the eve nt of a pa rking bra ke malfunction,
the yellow
IIJ symbol appears in the instr u
ment cluste r display a nd the driver message
Parking brake malfunction! is display ed .
Have t he ma lf u nct ion r epair ed as soon as
po ssible by a n authoriz ed Audi dea le r or a ny
o th er q ualifi ed w orksh op.
Page 20 of 316

18 Instrum ent s and w arn ing /indic ato r light s
BRAKE/ CQ)) Brake system
The warning/indicator light flashes if brake
fluid level is low, if there is an ABS system
malfunction or a parking brake malfunction.
The 1111 (USA models)/ . (Canada models)
light illuminates when the ign ition is turned
on .
It goes out after the engine has been
started. This indicates t hat the brake war ning
light is funct ion ing properly.
If th e br ake w ar ning light d oes not light up
w hen the engin e is c ranking , th ere ma y be a
ma lfun cti on in th e ele ctric al sys tem. In thi s
case, c ontact an auth oriz ed Audi d eale r.
If the brake system warning/ind icator light
flashes, there is a brake system malfunction .
By pressing the
ISE TI button, you can br ing up
a driver message which exp la ins the ma lfunc
tion in more detail
Q page 30.
If the ABS fails, the ABS warning/ind icator
light
B (USA mode ls)/ 11] (Canada mode ls)
flashes together w it h the brake system warn
ing/i ndicator light
Q & .
(USA models): If the 1111 warn ing light and
the
El warning light illuminate togethe r, im
mediately contact your author ized Audi dealer
or qualified workshop to have all bra ke pads
inspected
q page 34 .
When the light comes on, an audib le warni ng
signal is also give n.
A WARNING
- USA models: If the 1111 warning l ight
and
the m warning light come on to
gether, the rear wheels could lock up
first under hard braking . Rear wheel lock
up can cause loss of vehicle control and
an acc ident. Have your vehicle repaired
immediately by your authorized Audi
dealer or a qualified workshop . Dr ive
slowly and avoid sudden, hard brake ap·
plicat ions.
- Canada models: If the brake warn ing
light . and the ABS warning light
II]
come on together, the rear wheels could
.
lock up first under hard braking . Rear
wheel lock-up can cause loss of vehicle
control and an accident . Have your vehi
cle repaired immed iately by your author·
ized Audi dealer or a qualified workshop .
Drive s low ly and avoid sudden, hard
brake applications.
- If the brake warning/ind icator light does
not go ou t after a few seconds and the
pa rking brake released, or lights up wh ile
you are driv ing, the fluid level in the
brake fluid reservoir is too low. If yo u be
lieve that it is safe to do so, proceed im
mediately at low speed to the nearest
author ized Audi dealer or qualif ied repair
facility and have the brake system in·
spected.
- Always keep in mind that after severa l
brake applications, you will need greater
pressure on the brake pedal to stop your
veh icle. Do not rely on strained brakes to
respond with max imum stopping power
in critical s ituations. You must allow fo r
increased braking dis tances. The extra
distance used up by fading brakes could
lead to an accident.
Page 32 of 316

30 Driver in formation d isplay
Canada m odel s:
Bra ke system malfunction
c:>page30
Engine coolant level too low/en
gine coolant temperature too
high
c:>page 31
Engine oi l pressure too low
c:>page 31
Refill engine oil now
c:>page32
Steering malfunction
c:>page 32
Ignition lock malfunction
c:>page32
0 Alternator malfunction
If the . symbol in the instrument panel dis
p lay flashes, the n there is a malfunc tion in the
a lt ernator or the vehicle electron ics. A warn
ing to the driver will appear, too. The driver
warning goes out after about 5 seconds, but it
can be brought up at any time by pressing the
ISETI button again.
Usually, you can still drive to the next dea ler
ship. T urn off all b ut the most necessary elec
tr ica l cons umers, since these dra in the veh i
cle's battery.
(J;) Note
If the . war ning symbol (coolant system
malfunction) also lights up on the instru
ment panel during the trip
c:> page 31,
then you have to stop immediately and
turn off the eng ine. The coolant pump is
not working anymore--danger of damage
to the eng ine!
BRAKE/
A malfunction in the brake system must be
repaired as soon as possible .
If the warn ing /indicator light-(USA
models)/ . (Canada models) in the instru- me
nt cluster flashes, there is a brake system
malfunction. A driver message appears as
we ll to exp la in the ma lfunction in more de
ta il. The dr iver warning goes out after about S
seconds, but it can be brought up at any time by press ing the
ISE TI button again .
Stop the Vehicle and Check the Brake
Fluid
.,. Stop the vehicle .
.,. Check t he brake fluid level
c:> page 246 .
.,. Seek professional assistance if necessary .
Warning ! Fault in br ake system . Contact
workshop
.,. Drive ca refully to the nearest authorized
Aud i dea le r or other q ualified workshop and
have the malfu nction corrected
c:> &_ .
Parking b ra ke Plea se get to a repair shop
.,. If this symbol appears when the vehicle is
stat ionary or after the ignition is t urned on,
check to see if the par king brake can be re
leased. Dr ive to a n author ized Audi dealer or
other qualified workshop as soon as possi
b le and have the malfunc tion cor re ct ed. If
t he par king b rake cannot be opened, t hen
take it to an expe rt at an authorized A udi
dea ler .
.,. If the symbo l appea rs whi le yo u are d riving,
it is possible that the traction contro l or the
emergency brake has malfunctioned. It is
possible that the parking brake cannot be
app lied. It is also possible that the parking
brake cannot be released after it has been
app lied. Drive to an autho rized Aud i deale r
or other qualified workshop to have t he mal
fu nction corrected.
If the ABS system malfu nctions, the ABS
warning/indicator light illuminates togethe r
with the brake system ma lfunction w arning/
i ndica to r li ght
c:> .&..
A WARNING
-A lways observe t he warn ings in
c:> page 230, Engine compartment, be
fore open ing the hood and check ing the
brake fluid.
Page 33 of 316

-Driving wi th low brake fluid is a safe ty
haza rd. S to p the car and get professional
assistance.
- USA models: If the - warning light
and
the m warning light come on to
gether, the rear wheels could lock up
first under hard braking. Rear wheel lock
up can cause loss of vehicle control and
an acc ident. Have your vehicle repaired
immediately by your authorized Audi
dealer or a qualified workshop. Dr ive
slowly and avoid sudden, ha rd b rake ap
plications.
- Canada models: If the brake warn ing
ligh t. and the ABS warning light
[i]
come on together, the rear wheels could
lock up first under hard brak ing. Rear
wheel lock- up can cause loss of veh icle
control and an accident. Have your vehi
cle repaired immediately by your author
ized Aud i dealer or a qualified workshop .
Drive slowly and avo id sudden, hard
brake applicat io ns.
-L Engine cooling system malfunction
A malfunction in the engine cooling system
must be repaired as soon as possible .
If the . symbol flashes in the display , e ither
the eng ine coolant
temperature is too h igh or
the eng ine coolant
level is too low. A dr iver
message appears as we ll to explain the mal
f u nction in more detail. The drive r warning
goes o ut after abo ut S seconds, but it c an be
b rought up at any time by press ing the
!SE Tl
button again.
Sw itch off engin e and check coolant lev el
.,. Pu ll off the road .
... Stop the veh icle .
.,. Turn off the engine .
.,. Check coolant level¢
page 244.
.,. Add coolan t if necessa ry ¢ page 245 .
.,. Contin ue driving only after the eng ine cool
ant war ning/indicato r light goes o ut.
... Contact your a uthorized Audi dea ler for as
s istance if necessary .
Driver information di spla y 31
If the engine coo lant level is correct, then the
radiator fan may be the ca use of the malfunc
t ion .
_& WARNING
-If your vehicle should brea k down for
mechanical or other reasons, park at a
safe distance from moving traffic, turn
off the eng ine and tu rn on the haza rd
warn ing lights
~ page 52, Em ergency
flashers.
-
- Never ope n the hood if you se e or hear
steam or coo la nt escaping from the en
gine com partmen t -yo u ris k being scald
e d . Wai t until yo u ca n no longer see o r
hea r steam o r coolan t escap ing.
- Th e engine compa rtme nt o f any vehicle
is a dangerous area. Be fore you perform
any wo rk in the engine compartmen t,
tur n of the engine and allow it to coo l.
Follow the warn ing stickers ¢
page 230,
Engine compartment .
(D Note
Do not continue driv ing if the . symbo l
ill uminates . There is a malfunction in the
engine cooling system -you could damage
your engine.
"t::7: Engine oil pressure malfunction
The red engine oil pressure warning symbol
requires immediate service or repair. Driving
with a low oil pressure indication is likely to
cause severe engine damage.
If the . symbo l on the d isplay flashes, the
engine oil pressure is too low. A driver mes
sage appears as well to exp la in the malfunc
tion in more detail. The driver warning goes
o ut after about 5 seconds, b ut i t can be
brought up at any t ime by pressing the
~ IS- ET~ I
bu tton aga in .
Switch off eng ine ! Oil pr essure too low
... Stop the vehicle .
.,. Turn the engine off.
.,. Check the engine oi l level ¢
page 242.
Page 101 of 316

Using the parking brake to perform emer
gency braking will slow your vehicle down
as if you had made a full brake application.
The laws of physics cannot be suspended
even w ith ESP and its associated compo
nents (ABS, ASR, EDS). In corne rs and
when road or weather conditions a re bad,
a full brak e application can cause the vehi
cle to skid or the rear end to break away -
r isking an accident.
Driver messages in the instrument
cluster
Caution: Vehicle parked too steep
This message appears when the park ing brake
is applied on an incline that exceeds about
30%.
In this case the braking power of the parking
brake may
not be adequate to prevent the ve
hicle from rolling unintentionally .
Press brake pedal to release parking brake
This driver message appears when the switch
to release the parking brake was pressed. The
parking brake can only be released if you step
on the brake pedal and at the same time press
the switch or you automatically release the
parking brake with the start ing ass ist
<=> page 98.
(p] Parking brake m alfunction!
This driver message appears together with
the yellow
IIJ symbo l when there is a parking
brake malfunction.
On the road 99
Cruise control
Switching on
The cruise control system makes it possible to
drive at a constant speed starting at 20 mph (30 km/h) .
Fig. 108 Contro l l ever w ith push-b utton
Fig. 109 D isp lay : Selected speed
.. Pull the lever to position @<=> fig. 108 to
sw itch the system on.
.. Drive at the speed to be controlled.
.. Press button @to set that speed.
a,
~ 0 er a, a,
The stored speed and the green symbol
[ijj(Q~i~ (US model) /. (Canadian model) are
shown in the display<=> fig. 109. The display
may vary, depending on the type of display in
your vehicle. The ind icator light
mJJlm (US model)/ . (Canad ian model) will
also light up in the instrument cluster .
The speed is kept constant by modifying en
gine power or through an active brake inter
vention.
A WARNING
- Always pay attention to the traffic
around you when the cruise control is in
operation. You are always responsible for ..,.
Page 142 of 316

140 Homelink®
Homelink®
Universal remote
control
General information
Applies to vehicles: with Home link® universal remote
control
The Homelink ® feature can learn up to three
radio frequency codes for most current trans
mitters used for operating garage doors, es tate gates, home or outdoor lighting sys
tems, and other devices.
You must first program the Homelink ® trans
mitter before you can use the system
~ page 141, Programming the Homelink ®
transmitter.
In order to program the Home link ® transmit
ter for dev ices utilizing rolling code, a second
pe rson on a ladder who ca n safe ly reach the
garage door opener motor is recommended. I t is also necessary to locate the "learn" but
ton on your garage door opener motor . Refer
to the operating instructions for the opener,
as the location and color of this button may
vary by manufacturer.
You can still use the origina l remote contro l
for the device at any time .
.&_ WARNING
-
- Never use the Homelink ® transmitte r
with any garage door opener that does
have not the safety stop and reverse fea
tu re as requ ired by federa l safety stand
ards. Th is includes any garage door open
er mode l manufact ured before April 1,
1982.
- A garage door op ener which cannot de
te ct an object, signa ling the doo r to stop
and reverse does no t mee t current feder
al safety s tandards. Using a garage doo r
opener wi tho ut these features increases
risk of serious in jury or death.
- F or sa fety reasons never release the
par king brake or start the engine w hile
anyone is stand ing in front of the vehicle . -
A garage door or an estate gate may
sometimes be set in mot ion when the
Homelink ® remote control is being pro
grammed. If the device is repeatedly ac
tivated, this can overstrain motor and
damage its e lectr ical components -an
overheated moto r is a fire hazard !
- To avo id possible injuries or property
damage, please always make abso lutely
certain that no persons o r obje cts are lo
ca ted in the range of motion o f any
eq uipment being ope rated .
(D Tips
-If you would li ke more information on
Home link ®, w here to purchase the
Homel ink ® compatib le produc ts, or
would like to purchase the Homelink ®
Home Lighting Package , please ca ll to ll
free: 1-800-355-3515 .
- For Declaration of Compliance to United States FCC and Ind ustry Canada reg ula
tions~
page 296.
Page 153 of 316

area because the rear lid cannot be fully
closed.
-If you absolutely must drive with the rear
lid open, observe the following notes to
reduce the risk of poisoning:
- Close all windows,
- Close the panoramic tilting sunroof*,
- Open all air outlets in the instrument
panel,
- Switch off the air recirculation,
- Set the fresh air fan to the highest
speed.
A WARNING
Always make sure that the doors, all win
dows, the panoramic tilting sunroof* and
the rear lid are securely closed and locked
to reduce the risk of injury when the vehi
cle is not being used.
-After closing the rear lid, always make sure that it is properly closed and locked.
- Never leave your vehicle unattended es
pecially with the rear lid left open. A
child could crawl into the vehicle through
the luggage compartment and close the
rear lid becoming trapped and unable to
get out. Being trapped in a vehicle can
lead to serious personal injury.
- Never let children play in or around the
vehicle.
- Never let passengers ride in the luggage
compartment. Vehicle occupants must
always be properly restrained in one of
the vehicle's seating positions.
(D Tips
- Air circulation helps to reduce window
fogging. Stale air escapes to the outside
through vents in the trim panel. Be sure
to keep these slots free and open.
- The tire pressure must correspond to the load. The tire pressure is shown on the
tire pressure label. On USA vehicles, the
tire pressure label is located on the driv
er's side B-pillar. On Canada vehicles, the
tire pressure label is located either on
the driver's side B-pillar or inside the fuel
.
Driving Safely 151
filler flap. The tire pressure label lists
the recommended cold tire inflation
pressures for the vehicle at its maximum
capacity weight and the tires that were
on your vehicle at the time it was manu
factured . For recommended tire pres
sures for normal load conditions, please
see chapter
~page 256.
Tie-downs
The luggage compartment is equipped with
four tie-downs to secure luggage and other
items.
Use the tie -downs to secure your cargo prop
erly ~
page 150, Loading the luggage com
partment .
In a collision, the laws of physics mean that
even smaller items that are loose in the vehi
cle will become heavy missiles that can cause
serious injury. Items in the vehicle possess en
ergy which vary with vehicle speed and the
weight of the item. Vehicle speed is the most
significant factor.
For example, in a frontal collision at a speed
of 30 mph (48 km/h), the forces acting on a
10-lb (4.S kg) object are about 20 times the
normal weight of the item. This means that
the weight of the item would suddenly be
about 200 lbs. (90 kg). You can imagine the
injuries that a 200 lbs. (90 kg) item flying
freely through the passenger compartment
could cause in a collision like this.
A WARNING
Weak, damaged or improper straps used
to secure items to tie-downs can fail dur
ing hard braking or in a collision and cause
serious personal injury.
- Always use suitable mounting straps and
properly secure items to the tie-downs in
the luggage compartment to help pre
vent items from shifting or flying for
ward as dangerous missiles.
- When the rear seat backrest is folded
down, always use suitable mounting
straps and properly secure items to the
•
•