AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual A6 1998 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/1198/w960_1198-0.png AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual
Trending: tow, transmission fluid, sensor, wiring, checking oil

Page 1 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-1
 
     
Oil pan, oil strainer and valve 
body, removing and installing 
     
WARNING! 
     
Do not run engine with the oil pan removed or 
without ATF filling and do not tow vehicle. 
     
Not

Page 2 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-2
      
Removed parts, overview
 
     
Notes:  
     
There is a distinction made between two types 
of transmission. Transmissions with hydraulic 
control E17, the sensor for transmission RPM 
(

Page 3 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-3
 
  
Overview of the removed parts for transmission 
with Park/Neutral Position (PNP) Switch -E17-  
1 - 
Drain plug - 40 Nm 
5 mm socket-head boltRemove to drain ATF   page 38
-20
2 - 
Seal 
Alw

Page 4 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-4
 
  
 Parts Catalog    6 - 
ATF-strainer 
Removing and installing   page 38
-21
7 - 
Bolt - 8 Nm 
For mounting valve body: 1 bolt M6 x 30, 
16 bolts M6 x 60 Observe tightening sequence   page 38

Page 5 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-5
 
  
10 - 
Bracket 
For wiring harnessHook in wiring harnessMounted with valve body bolts
11 - 
Bolt - 6 Nm 
12 - 
Transmission Vehicle Speed Sensor (VSS) 
-G38- Removing and installing   page 38

Page 6 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-6
 
  
16 - 
Speedometer Vehicle Speed Sensor (VSS) 
-G22- 
Removing and installing   page 38
-35
17 - 
O-ring 
Always replaceCoat with Vaseline
18 - 
Multi-Function Transmission Range (TR) 
Switch

Page 7 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-7
 
  
22 - 
Wiring harness 
Always replace   page 38
-42
Transmission Fluid Temperature Sensor -
G93- is integrated into the wiring harness Remove and install valve body to install   
page 38
-22

Page 8 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-8
 
  
25 - 
Spacer sleeve 
Height: 20 mm
26 - 
Bolt - 6 Nm 
27 - 
Bracket For solenoid valve
28 - 
Solenoid Valve 4 -N91- With O-ringRemove and install valve body to install   
page 38
-22
 
29 -

Page 9 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-9
 
  
31 - 
Bolt - 6 Nm 
32 - 
Bracket 
For solenoid valves
33 - 
Solenoid Valve 6 -N93- With O-ringRemove and install oil pan to replace   
page 38
-19
 
34 - 
Solenoid Valve 7 -N94- 
With O-ring

Page 10 of 44

AUDI A6 1998 C5 / 2.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual 38-10
 
  
36 - 
Solenoid valve 1 -N88- 
Without O-ringRemove and install oil pan to replace   
page 38
-19
 and unbolt guide plate for park 
locking mechanism 
When installing, do not tighten bolts f
Page:   1-10 11-20 21-30 31-40 41-50 ... 50 next >
Trending: tow, transmission fluid, wiring, sensor, checking oil