AUDI A6 2011 Manual Online

Seat memory
Applies to veh icles: with seat memory
Driver's seat memory
The seat adjustment settings for two drivers can be
stored using the memory buttons in the driver's door.
-...... SET 1 2 ,,..,
Fig. 68 Driver's door:
Seat memory
In addition to the setting for the driver's seat, the settings for the
steering column* and both exterior mirrors can be stored.
Storing and r ecalling setting s
Using the memory buttons 1 and 2, you can store and recall the
settings for two different drivers~ fig . 68 .
T he current settings are also automatically stored on the remote
control key being used when the vehicle is locked. When the vehicle is
unlocked, the settings stored on the remo te contro l key being used
are automatically recalled. This function has to be activated in the
MMI
~ page 80, " Activating remote cont rol key memo ry" .
Tur ning seat m em ory o n and off
If the [ ON/OFF I switch is depressed , the seat memo ry is inoperative .
The word
OFF next to the [ ON/OFF ) switch illuminates.
All the stored settings are retained. We recommend using the
I ON/OFF ) switch and deact ivat ing the seat memory if the vehicle is
Controls and equip ­
ment Safety first
S
eats and storage
only going to be used temporarily by a driver whose settings are not
going to be stored .•
App lies to veh icles : w it h seat memo ry
Storing and recalling a seat position
Before you can store or recall your seat position, the
[ON/OFF) button must be engaged (down) .
Storing settings
-Adjust the driver 's seat => page 76.
- Adjust the steering column*=>
page 107.
-Adjust both outside mirrors=> page 71. In the ti lt-down
position, the passenger mirror can be adjusted to the
preferred position and saved in the seat memory.
- Press the
[SETI button and hold it down. At the same
time, press one of the memory buttons for at least one
second .
- Release the buttons. The settings are now stored under the corresponding memo ry bu tton.
Recalling settings
- Driver's door open -press the des ired memory button.
- Driver's door closed - press the corresponding memory
button unt il the stored position is reached .
Su ccessfu l storage is confirmed audib ly and by the light in the [SET )
button illuminat ing .
When the vehicle is
locked , the current settings are stored and
assigned to the remote control key. But the settings sto red on
memory buttons 1 and 2 are not deleted. They can be recalled at any ..,
Vehicle care Technical data

Seats and storage
time. When the vehicle is unlocked , the settings stored on the
remote con trol key are res to red .
If your ve hicle is driven by othe r persons using yo ur remo te con trol
key, you sho uld save yo ur individ ua l seat position on one of the
memo ry bu tton s. Yo u can recall you r se tting s ag ain sim ply and
conveniently by p ressing the cor responding memory button. When
t he vehi cle i s lo ck ed , the se se tt ings are a uto mati ca lly re-assig ned to
the remote cont rol key and stored .
& WARNING
• For safety reasons , the seat setting can only be recalled when
the vehicle is stationary -otherwise you risk having an accident .
• In an emergency , the recall operation can be stopped by
pressing the [
ON/OFF ] button or by briefly pressing any given
memory button. •
Applies to ve hicl es : w it h seat m em ory
Activating remote control key memory
To be ab le to re ca ll the st ore d set tings with the rem ote
co ntr ol key, the func tion h as to be activa ted in the MMI.
- Sele ct: Funct ion butt on I CAR] > Systems* > Seat
adjustment > Driver's seat > Key mem. profile> On. •
Rear seats
General information
Safe transpo rtat ion of pa sseng ers on t he re ar seat s
r eq uires prope r safety prec aut ion s.
All passengers on the rear seats must be seated in compliance with
t he s afe ty gu idelin es expl ain ed in~
page 18 7 and ~ pa ge 19 7. T he correct seating position is critica
l for the safety of front
and rear seat
p assenge rs alik e~
page 180.
& WARNING
• Occupants in the front and rear seats must always be properly
restrained .
• Do not let anyone ride in the vehicle without the head
restraints provided. Head restraints help to reduce injuries.
• Loose items inside the passenger compartment, can fly
forward in a crash or sudden maneuver and injure occupants .
Always store articles in the luggage compartment and use the
fastening eyes, especially when the rear seat backs have been
folded down.
• Read and heed all WARNINGS~
page 180, "Proper seating
positions for passengers in rear seats ".•
Rear window shelf
You can place light articles of c lothing on the rea r win dow
sh elf behi nd th e s eatbac k.
& WARNING
Whenever you are driving, do not leave any hard objects on the
rear window shelf or allow your pet to sit on the shelf . These could
become a hazard for vehicle occupants in the event of sudden
braking or a crash!
[ i ] Tips
• A vent slot is located between the shel f and the rear window . Do
no t bl ock the ven t wi th any item s you m ay pla ce o n the re ar window
shelf.
• Do not place b ulky items o n the rea r window she lf as t hey wo uld
restrict or bloc k the driver 's vis ion thro ug h the rear view m irror. •

Head restraints
Front head restraints
Head restraints that are adjusted according to body size,
along with the seat belt, offer effective protection.
Fig. 69 Fro nt seat:
Adjus tin g the head
r est rai nt
The head restraints on the front seats can be adjusted to
provide safe support to head and neck at the optimum
height. When optimally adjusted, the top of the restraint
should be level with the top of the head=>
page 181, "Proper
adjustment of head restra ints".
R ai sing the head restr aint
- Grasp the sides of the head restraint with both hands.
- Lift the head restraint.
Lowering the head restraint
- With one hand push down on the middle of the head
restraint .
- With the other hand press the release knob:::;, fig. 69 and
push the head restraint down .
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
Refer to::::;, page 181, "Proper adjustment of head restraints" for
guidelines on how to adj ust the height of the front head restraints to
suit the occupant's body size .
& WARNING
• Drivin g w ith out hea d res traints or w ith hea d r estra ints th at a re
n ot prop erl y a dju st e d inc reases the risk of seri ou s o r fa tal nec k
i n ju ry dram atically.
• Rea d an d h eed all W ARNINGS ::::;,
page 1 8 1 .
(I] Tip s
Correctly adjusted head restraints and safety belts are an extremely
effective combination of safety features. •
Rear head restraints
Passengers may only be carried if the head restraints has
been raised to its uppermost position.
Fig. 70 Rear seats:
h ead res train ts
The rear head restraints mus t be raised fully upward when
passengers ride in the rear seats . _,,
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
Adjusting the head restraints
- To move the hea d restraint up, hold it at the sides and
slide it upwar d unt il it la tches .
- To move the head restra int down , press the button©
~ page 81, fig. 70 and slide the head restra int dow nward.
Removing the head restraints
- Slide t he head restrai nt all th e way up.
- Press the release butto n© and pu ll the h ead restraint out
and cl ear o f the se at.
Installing the head restraints
-Slide t he posts on the head restraint down into the gu ides
until the posts c lick into p lace. You s hou ld not be ab le to
pull the head restraint out of the backrest.
So that the driver can have a better view to the rear, the head
restra in ts should be pushed down comple tely when t he rea r seats are
not occupied .
& WARNING
• Only remove the rear seat head restraint s when necessary in
order to in stall a child seat . In stall the head restraint again imme­
diately once the chi ld seat is removed. Driving w ithout head
restraint s or with head res traints that are not properly adjusted
increases the risk of serious or fatal neck injury dramatically .
• Read and heed all WARNINGS=>
page 181
(I) Tips
Correct ly adjus ted head restraints and safety belts are an ext reme ly
effective comb ination of safety features. •
Appli es to veh icles : w ith front a rm res t
Armrest
The armrest can be adjusted to s everal positions and
contains a storage compartment.
Adjusting the armrest
Fig. 71 Armre st
b etw een driver's and
pa ssenge r's se at
-To adjust the armrest angle, pivot the armrest fu lly dow n.
- Lift the a rmrest detent by de ten t until th e desi red posi-
tion is rea ched.
Opening storage compartment
- Press the release lever~ fig. 71.
Please note that the driver's arm movements may be restricted with
t he arm rest folded down. For th is reason, t he armrest s ho ul d not be
folded down when driving in city traff ic. •

Luggage compartment
Increasing Luggage compartment space
You can create additional space for loading luggage by
folding do wn either or both of the rear seatback
segments to form a deck .
Folding backrest down
Fig. 72 Rear backr es t:
rele ase lever
Fig. 73 Rea r ba ckr est:
l o cki ng t he b ackre st
- Push forwa rd release lever ©~ fig. 72 i n direction of
arrow.
- Fold the backrest down .
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
Returning backrest to upright position
- Push rear seat backrest up unti l it engages~ &. You will
know that the seat is properly engaged when you canno t
se e t he red marking on the lever @.
Locking the backrest
- Insert your key into t he lock ~ fig . 73 and turn it clock­
w ise.
Unlocking the backrest
- Ins ert the key in to the lock and turn it count er-clockwise .
Stowing luggage
-For safe loading and securing of items read an d follow the
guidelines on~
page 183.
The rear seatback is divided into two segments -one third/two thirds.
You can fold down ei ther or bo th parts of t he sea tback.
T he release levers for the fo lding backrests can be loc ked when the
back rests are properly engaged in their upr ight position. This
prevents unauthor ized access to the luggage compartment from
withi n the vehicle. The release levers can only be locked with the
master key o r emergency key.
& WARNING
• The backr est must always be s ecurely latched so that the sa fety
belt of the center seating position can work properly to help
prote ct the occupant .
• The backrest must be securely latched in position so that no
items contained in the luggage compartm ent can s lide forward
upon sudden b raking.
• Never allow safety belts to become damag ed by being caught
in d oor or seat hardware. _,.
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
& WARNING (continued )
• Torn or frayed safety belts can tear and damaged belt hardware
c an break in a crash . Inspect the belts periodically. Belts showing
damage to webbing , bindings, buckles, or retractors must be
replaced.
& WARNING
Always read and heed WARNINGS=> & in "Loading the luggage
compartment " on
page 183.
(D Note
When folding the back rest back into place, make sure t he safety be lt
do es not get caught, because it ca n be damaged. A damage d belt can
fa il to prov ide safe restra int. •
Fastening eyelets
The luggag e com partme nt is equ ipped wi th f our tie-do wn
e y ele ts t o se cure luggag e and oth er it ems.
Fig . 74 Luggage
c ompa rtme nt
fas tening eyelet s
-Use th e t ie-down ey elets to se cu re your ca rg o pro perl y
=> fig. 74 -a rrow s- .
- Read an d he ed all W AR NIN GS=>
page 183, "S to wi ng
lu ggag e".
In a co llision, the laws of phys ics mean that ev en smal ler items tha t
are loose in the vehicle will turn into h eavy missiles that can cause
s e rious in jury . Items i n the veh icl e pick up kine tic energy which var ies
w ith the vehicle and the we ight of the item . Vehicle speed is the most
s ignifi cant factor.
For e xample, in a frontal coll is io n at a speed of 30 mp h (48 km/h),
t he f orces a ctin g on a 1 0-lb (4 .5 kg) obj ect are about
20 times th e
normal weight o f th e ite m. This means that the weig ht of the item
woul d su dden ly be the eq uiva lent of about 200 lbs (90 kg) . One can
e asily imag ine the injuries tha t an item of that we ig ht flyi ng fr eel y
throug h the passenger compartme nt can cause in a collisio n at a
s p ee d co nsidere d relati vely low.
& WARNING
Weak, damaged or improper straps used to secure items to tie­
downs can fail during hard braking or in a collision and cause
serious personal injury .
• Always use suitable retaining straps and properly secure items
to the tie -downs in the luggage compartment to help prevent
items from shifting or flying forward.
• When the rear seat backrest is folded down, always use suit­
able retaining straps and properly secure item s to the tie-downs in
the luggage compartment to help prevent items from flying
forward into the passenger compartment.
• Never attach a child safety seat tether strap to a tie-down. •

App lies to veh icles : with ca rgo net
Elastic cargo net
The cargo net prevents light objects from sliding around
in the luggage compartment.
Fig. 75 Luggage
compartme nt cargo
ne t
Fig. 76 Luggage
compar tment car go
net attach ed to
mounting hooks*
Securing objects to the luggage
compartment floor with the net
-Lay out the cargo net in the luggage compartment .
- Engage all four hooks into the fasten ing eyelets => fig. 75.
- Place objects to be secured under the net.
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
Configuring the net to restrain small objects
- Lay out the cargo net in the luggage compartment .
- Engage the hooks on the cargo net in the fastening eyelets
in the floor at the rear of the luggage compartment
=> fig . 76.
- Pull down the mounting hooks -arrows- located below the
base of the rear window.
- Connect each loop on the net to the corresponding hook as illustrated .
- Place items inside the net.
Mounting hooks*
There are two mounting hooks under the base of the rear window
inside the luggage compartme nt. You can attach the cargo net as well
as
light objects to these hooks.
The mounting hooks are spring-loaded and will return to their normal
position when not in use .
& WARNING
For strength-related reasons, the mounting hooks can only be
used to secure objects weighing
up to 10 lb. (5 kg). Heavier
objects will not be adequately secured -there is a risk of injury. •
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
Left-side compartment
The DVD player for the navigation system* is in the left­
side storage compartment.
• •
Fig. 77 Luggage
compartment: storage
compartment for DVD
player
Fig. 78 Luggage
compartment: DVD
player for the naviga·
tion system
-To open, pull the handle forward=> fig. 77.
CD-ROM player for Navigation System*
The CD-ROM player for the navigation system=> fig. 78 is located in
this storage compartment in the luggage compartment. Operation is
described in the instructions for the audio system .•
Applies to veh icles : with load -through faci lity and removab le s ki sack
Ski sack
Use the removable ski sack to transport and protect skis
and other long, light items in the passenger compart­
ment .
Loading ski sack
Fig. 79 Luggage
compartment: ski sack
flap
Fig. 80 Ski sack:
securing with rear seat
safety belt
-Fold out center armrest in the rear seat backrest.
- Press the release button -arrow-=> fig. 79 for the ski sack
flap in the passenger compartment and pull down the
flap.
- Open the luggage compartment lid .

- Pull out and unfold the ski sack.
- Load skis or similar objects through the luggage compart-
ment into the interior of the vehicle~&.
Securing ski sack
- Insert the ski sack strap@~ page 86, fig. 80 in the
center buckle
® ·
- Pull the safety belt taut on the free end of the belt @.
Stowing ski sack
- Pull the ski sack through the rear backrest to the rear.
- In the passenger compartment, close the ski sack flap.
- Fold the ski sack carefully.
& WARNING
• The ski sack is intended only for the transportation of skis and
other light objects. To reduce the risk of serious personal injury
never transport heavy or pointed objects in the ski sack.
• When braking rapidly or during an accident the load could be
displaced and cause injury to occupants.
• Sharp edges on the load must be covered for protection.
Always fasten the belt tightly around the sack and its contents
=> page 86, fig. 80.
[ i] Tips
Never stow the ski sack away if it's wet or damp (for example, snow
melting from skis). Let it dry completely before you stow it away. •
Controls and equip ­
ment Safety first
Seats and storage
Roof rack
First things first
A roof
rack can be fitted to carry additional luggage on
the roof
-Always read and follow the instructions provided by the
roof rack manufacturer when the roof rack system must
be installed.
If you are transporting luggage or other objects on the roof, please
note the following:
• Your vehicle has specially designed aerodynamic roof rails. Only
install a roof rack specifically designed for your model. Contact the
nearest Audi dealer for information on approved modular roof racks
for your vehicle .
• These approved roof racks are the basis for a complete roof rack
system. Additional attachments for the basic roof rack are necessary
to safely transport luggage, bicycles, surf boards, skis or small boats.
All necessary hardware for these systems is available at your autho­
ri zed Audi dealer .
• We recommend that you keep the installation instructions for
your roof rack system together with your Owner's literature in the
vehicle.
When should the roof rack be removed?
• Before going through an automatic car wash (it is best to ask the
car wash operator for advice).
• When not in use, to reduce fuel consumption, wind noise and to
guard against theft. _,,,
Vehicle care Technical data

Seats and storage
& WARNING
• Use of an unapproved roof rack or incorrect mounting of an
appro ved ro of rack can cause the roof ra ck or the i tems attached
to it to fall off the roof onto the road .
• Obje ct s falling from the roof of a vehicle can cause a cra sh and
personal injury .
• Only mount the sy stem between the marking s shown in
~ fig. 81 .
• The roof rack sy stem must be installed exactly according to the
instructions provided.
0 Note
• Your vehicle warranty does not cover any damages to the vehicle
caused by using roof ra cks or mounti ng struc tures not app roved by
Audi for your vehicle . The same applies to damage resulting from
incorrect roof rack insta llation.
• Always check the roof rack mountings and hardware before each
t rip a nd dur ing a tri p t o ma ke sure everything is sec ure ly tightened . If
necessary, retig hten t he mountings and check the ent ire system from
ti me to time.
• After mounting a roof rack system, or when yo u transport objects
on t he roo f of your veh icle, t he he igh t of the vehicle is n atur ally
increased . Be ca reful whe n driving under low bridges or in parking
garages fo r ex amp le. This could c ause dama ge to t he lo ad and even
the vehicle itself. •
Mounting locations
Safe ins tall atio n o f a r oof ra ck requires th at the rack
s up ports a re m ounted b etw een the s mall arrow s ma rked
insid e the door frames on all four doors .
Mounting
Fig. 81 Front and rear
m arking s
The roof ra ck system mu st be installed exactly according to the
i nstructions provided.
M ount the roo f racks supports in t he side roo f mo ldings. Make sure
to position th e sup po rt s on
all four doors between the points ma rked
by small arrows ~ fig. 81. The ma rkings can only be seen when the
doors are open .•
Loading the roof rack
A lw ays distr ibute loads evenly. Make sure anythi ng on
t he roo f ra ck is securely tie d do wn.
- Always dis tri but e the loads o n th e roo f rack evenly .
- Always a ttach items to the roof ra ck se curely bef ore y ou
d rive off. _,,