change time AUDI TT COUPE 2016 User Guide

Downloaded from www.Manualslib.com manuals search engine Intelligent Technology
Automatic mode (normal operation)
-Automatic extension: the rear spoiler will auto­
matically extend when speeds exceed approxi­
mately 75 mph (120 km/h)
-Automatic retraction: the rear spoiler will auto­
matically retract when speeds decrease to un­
der approximately 50 mph (80 km/h).
Manual mode
-Extending manually: briefly tap the~ fig. 89
button to fully extend the rear spoiler.
- Retracting manually:
when driving at speeds
below approximately 10 mph (20 km/h), press
and hold the button to retract the rear spoiler.
When at speeds between 10 mph (20 km/h)
and 75 mph (120 km/h), the rear spoiler will
completely retract when you tap the button.
Indicator lights
Ii) I. Rear spoiler: malfunction!
The
rear spoiler may not have extended due to a
malfunction.
This could change the veh icle's driv­
ing characteristics
at high speeds. Do not drive
faster than 85 mph (140 km/h). Drive to an au ­
thorized Audi dealer or authorized Audi Service
Facility
immediately to have the malfunction cor­
rected. The color
of the indicator light depends
on the vehicle speed.
..&. WARNING
-
Driving at higher speeds without the rear
spoiler deployed can impair handling charac­
teristics, making
the vehicle harder to con­
trol.
- Always
make sure that the spoiler is de­
ployed when driving at
speeds ove r 85 mph
(140 km/h). If the rear spoiler warning/indi­
cator light in the instrument cluster comes
on, the rear spoiler may not have deployed.
- Never drive
at speeds higher than 85 mph
(140 km/h) ifthe spoiler is not deployed.
Have
the spoiler inspected as soon as possi ­
ble by an
authorized Audi dealer or qualified
workshop.
- Always obey
speed limits and other traffic
laws.
92
..&. WARNING
Improper operation of the rear spoiler can
cause crushing injuries.
-Always make sure that nobody, especially
children, is
in the way when the rear spoiler
is deployed or retracted.
«J:) Note
-Never push on the vehicle on the rear spoil­
er. This could
cause damage.
- To
prevent damage to the rear spoiler do
not lean or place anything on it.
-
-Only operate the rear spoiler manually when
the luggage compartment lid is close and
the rear spoiler moving parts are not
blocked. Otherwise, damage could occur.
(D Tips
Clean the rear spoiler compartment every 2 to
3 months. To function correctly, the rear
spoiler must be free of ice, snow and leaves.
Energy management
The starting ability is optimized
The energy management system manages the
electrical energy distribution
and optimizes the
availability
of electrical energy for starting the
engine.
When a vehicle with a conventiona l energy sys­
tem is not driven for a long time, the battery is
drained by equipment (for example the immobil­
izer). In
certain circumstances, there could may
not be enough energy to start the engine.
Your vehicle
is equipped with an intelligent ener­
gy
management system for distributing electrici­
ty. T his sign ificant
ly improves the starting ability
and increases the battery life.
The
energy management system Is made up of
battery diagnosis, Idling current management
and dynamic energy management.
Battery diagnosis
The battery diagnosis determines the battery
charge level. The sensors determine the battery Ill>

Downloaded from www.Manualslib.com manuals search engine Intelligent Technology
Information about data
recorded by vehicle
control modules
Your vehicle is not equipped with a crash data re­
corder. This device is installed by some vehicle
manufacturers to record data about crashes so
that it can be analyzed later. Crash data record­
ers are also called "Event Data Recorders (EDR)".
In some legal jurisdictions, it is not permitted to
access or download data reco rded by pre-instal­
led crash
data recorders in order to evaluate a
crash without clear consent of the vehicle owner.
Your vehicle is not equipped with a crash data re­
corder. However it does contain a variety of elec­
tronic control modules for various vehicle sys­
tems such as engine function, exhaust treatment
or airbags and safety belts.
These electronic control modules record vehicle
data during normal driving for diagnosis and re­
pair
purposes. The recording capability of the
electronic control modules is limited to data only
·no sound is recorded. If the control module de·
tects a system malfunction or other change in
status, a very limited amount of data is recorded
for an extremely small period of time. Data that
is recorded in such a case may include vehicle
speed, driving direction, the load on the brakes
and head restraints and performance in the event
of an accident or other change in status. The
stored data can only be read or downloaded with
specia l devices .
94

Downloaded from www.Manualslib.com manuals search engine Voice recognition system
Voice recognition system
Operating
Applies to: vehicles with voice recogn ition system
You con operate many Infotainment functions
conveniently by speaking .
Fig. 10 4 Talk button and right thumbwheel on th e multi·
functi o n steer ing whee l
Requirement: the ignition and the MM! must be
switched on i::> page 95, there must be no phone
call in progress and the parking system must not
be active .
.. S
witching on: briefly press the 12!]c:> fig . 104
button on the multifunction steering wheel*
and say the desired command after the Beep.
..
Switching off: press and hold the 5:1 b utton.
Or : say the command Cancel.
.. Pause: say the command Pause . To resume,
press the 10°1 b utton.
.. Corre cting: press the~ button one time. Or:
say the command Correct.
Input assistance
The system gu ides you through the input with
visual
and audio feedback.
- Visual
input assistance: after switching on
voice
recognition, a display with a selection of
possible commands appears. The command
display can be switched on/off under I MENU!>
S ettings> left control bu tton > MMI settings>
Speech dialog system.
- Audio
input assistance: to have the possible
commands read, turn t h e voice recognition sys­
tem on a nd say Help .
104
For the system to understand you:
Speak clearly and distinc tly at a normal vol ume.
Speak louder when driving faster.
E
mphasiz e the words in the commands evenly
and do not leave long pauses.
Do not speak a command when the voice recogni ·
tion system is making an announcement.
Close the doors, the windows and the sunroof* to
reduce background noise. Make sure that passen­
gers are not speaking when you are giving a voice
command.
Only use the system from the driver's seat be­
cause the hands free microphone is directed to·
ward that seat.
Additional settings
Additional settings such as individual speech
tra ining to your voice, Command display or v ol­
ume of spoken prompts can be adjusted under
IMENUI >Settings> left control button> MMI
settings > Speech dialog system .
.&. WARNING
- Direct your full attention to driv ing . As the
driver, you have complete responsibility for
safety in traffic. O nly use the functions in
such a way th
at yo u always maintain com­
plete control over your vehicle in all traffic
situations.
-
Do not use the voice recognition system in
emergencies beca use your voice may change
in stressful situations. It may take longer to
dial the number or the system may not be
able to dia l it at all. Dial th e emergency
number manually.
@Tips
- The dia log pauses when ther e is an incom­
ing phone call and will continue if you ig­
nore the call. The dialog ends if you answer
the call.
- Navigation messages and traffic announce·
ments* are not made during a dialog.
-
You can select an item in the list using ei­
ther the voice recognition system or the
control knob.

Downloaded from www.Manualslib.com manuals search engine Voice recognition system
Function
General map options
Map type
Showing
the route list
Showing the remaining distance/
time when route guidance is active
Speed
limit prompt
Setting voice guidance for active
route guidance
Auto rerouting
(traffic)
B locking a certain section on
the
route
@ Tips
Say:
Map I Day map I Night map I Automatically change map color
2D driving position map I 2D north position map I 3D map I
Destination map I Overvi ew map I Stand ard map* I Traffic
map* I Google Earth map*
Route li
st
Destin ation information
How fast
can I drive here?
Manual rerouting
I Auto rerouting I Rerouting off
Block route (XV) mete rs / kilomete rs /yards/miles I Block next
route I Block nex t sect ion of route
you are located and which menu language
you have
selected.
- Destinations may have
to be spelled when
entered, depending on
the country where -
Refe r
to the notes in the About Audi con­
nect chapter¢ page 128.
Radio
Applies to: vehicles with vo ice recogn ition system
Requirement: the Radio must be open already re­
gardless of what menu you are currently in.
Function Say:
Selecting the reception band FM I SiriusXM * I AM
Selecting a station from t h e s ta tion Channel (XV) I !Frequenc y (XV) I Last station s
list
Selecting a station from favorites/ Radio presets > Line (XV)
presets
Setting
the frequency Frequenc y (XV)
Setting the frequency Frequency (XV) I Frequency (XV) HD 1
Correct data input No, I meant (XV)
Close the entire command list Closing
Media
Applies to: vehicles with vo ice recogn it ion syste m
Requ ir emen t: a media source must be open al­
ready regard l
ess of what menu you are current ly
in.
108

Downloaded from www.Manualslib.com manuals search engine Telephone
Telephone
Introduction
Applies to: vehicles with telephone
To make calls through the MMI system, you must
connect your phone to the MMI with Bluetooth.
After connecting
your phone to the MM with
Bluetooth, you can use the telephone functions
conveniently
through the MMI.
Handsfree
After you have connected your cell phone to the
MMI via Bluetooth, you can use the handsfree
system and operate telephone functions through
your MMI. Phone calls are transmitted thro ug h
the antenna on your cell phone.
A WARNING
-Medical experts warn that cell phones can
interfere with the function of pacemakers.
Always maintain a minimum distance of 20
centimeters between the cell phone anten­
na and the pacemaker.
-
Do not carry the cell phone in a pocket di­
rectly over the pacemaker when the phone
is switched on.
- Switch
the cell phone off immediately if
you
suspect it may be interfering with the
pacemaker.
-Do not use the voice recognition system
¢page 104 in emergencies because your
voice may change in stressful situations. It
may take longer to dial the number or the
system may not be able to dial it at all. Dial
the emergency number manually.
- Switch
your cell phone off in areas where
there is a risk of an exp losion. These loca­
tions are not always clearly marked. This
may include gas stations, fuel and chemical
storage facilities or transport vehicles, or lo­
cations where fuel vapors (such as propane
or gasoline vapor in vehicles or buildings),
chemicals
or large quantities of dust parti­
cles (such as flour, sawdust or metal) may
be present in the air. This also applies to all
other locations where you would normally
turn your vehicle engine off.
110
-
-The demands of traffic require your full at­
tention. Read and follow the guidelines pro­
vided in¢ page 95, Traffic safety informa­
tion.
(D Tips
The Bluetooth connection range is limited to
inside the vehicle. It can also be affected by
local conditions
and interference with other
devices.
- Check
with your cell phone service provider
or the database for mobile devices at
www.audiusa.com/bluetooth to learn which
Bluetooth connections and functions are
supported on your cell phone.
Connecting a telephone
Connecting a cell phone using Bluetooth
Applies to: vehicles with telephone
Fig. 105 Displaying the PIN for entering in the cell phone
Requirement
The vehicle must be stationary and the ignition
must be switched on.
The Bluetooth
function and visibility of the MMI
¢page 168 and cell phone must be switched on.
The cell ph
one to be connected must not be ac­
tively connected to any other Bluetooth device.
T he
MMI must not be connected to a cell phone.
Pairing a cell phone
... Select: IMENUI button >Telephone> Connect
cell phone > Next . The available Bluetooth de­
vices are shown in the Infotainment system dis­
play. Or: search for the MMI in your cell phone
through the Bluetooth device search. ""'

Downloaded from www.Manualslib.com manuals search engine Audi connect
After connecting successfully
After connecting successfully, the signal strength
is indicated in the Infotainment system display
status line with one or two symbols, depending
on the connection type @I@ Q page 101,
fig. 101.
You can now use Audi connect.
... Select: the IMENUl button> Aud i connect.
... Confirm the system prompt asking to connect
to the Internet with Yes, always if required.
Removing the SIM card
... Press on the SIM card briefly. The card is re­
leased from the slot. Remove th e SIM card.
CD Note
Audi connect i s designed for use only with the
provided SIM card. Audi AG is not liable for
the consequences of using other SIM cards.
Tips
-You can connect a cell phone with Bluetooth
(handsfree) to make phone calls
Qpage 110.
- Audi does not provide support for other SIM
cards. Audi
recommends using only the pro­
vided SIM card.
-You can specify when the MMI establishes
a n Internet connection. The Internet con­
nection disconnects automatically once the
requested Audi connect service no longer re­
quires any data packets.
-The data connection for Audi co nnect serv­
ices is preconfig ured at the factory. H owev­
er, if you need to adjust the configur ation,
you can
change the data connection at any
time.
122
Configuration through
my Audi
Activating/configuring specific Audi
connect services
Applies to vehicles with Audi connect
Some Audi connect services must be activated/
configured through your personal myAudi ac­
count before using them for the first time .
-
If you do not have a personal myAudi account
yet, you can register online at my.audiusa.com.
-Add your vehicle to your myAud i accoun t.
-Activate/configure the Audi connect services
you wou
ld like for your vehicle in your myAudi
account.
-For some Aud i connect services, you may also
have
to enter your myAudi user data or your
myAudi
PIN when accessing services in the MMI
to connect your vehicle to myAudi.
For
detailed configuration information, see
my.audiusa.com.
Logging into myAudi in the vehicle
Applies to vehicles with Audi connect
To use some Audi connect services (such as Face­
book*), you must first connect your vehicle with
myAudi to transfer
your personal settings from
your myAudi account.
... Select: lMENUI button> Audi connect> right
control button > Log in.
... Enter your myAud i user data. Or: enter your 8-
dig it myAud i PIN.
... Confi rm your entry w it h OK.
Then you can
open your personal settings from
your myAudi account in your vehicle.
Tips
You can receive your myAudi PIN if you have
set up a myAudi account. For additional infor ­
mation, see my.audiusa.com.

Downloaded from www.Manualslib.com manuals search engine ..... N
G: CX)
.....
"' U"I
.....
"' .....
Overview of Audi
connect services
Basic functions
Applies to vehicles with Audi connect
F i
g. 113 Audi con nect home page with preview
If available, the Audi connect men u disp lays
functions specific
to certain services in the selec­
tion menu¢ page 96 for that Audi connect serv­
ice .
Basic functions
are found in the options menu
¢page 97 for the corresponding Audi connect
service .
.. Se lect: the I MENU! button >Audi connect> the
desired Audi connect service
> right contro l
button.
Depending on th e A udi connect service selected,
the following functions are available:
Save as preview
You can display the preview in the ove rview of the
selec ted Audi co nnect serv ices CD¢ fig. 113.
Show on map
You can show selected contents on the map and
use them for route guidance.
Read aloud
You can allow the MM! to read out the selected
contents.
Navigate
If a city was added to an entry (such as City
events), you can use it as a navigation destina­
tion
in the M M!.
Audi connect
Refresh
The contents for the selected Audi connec t serv­
ice are refreshed .
Change search area
The set search area can be changed at any time.
Additional informa tion on searc h
areas ca n be
found under¢ page 134.
Close Audi connect service
Regardless of what function is selected, you can
close an Audi connect service
at any time and re­
turn to the A udi connect overview ¢ fig. 113.
Weather
Applies to vehicles with Audi connect
Information on current weather condit ions as
well as weather forecasts for the selected search
area (for ex
ample, In immediate vic inity).
.. Select and confirm Weather.
Flight information
Applies to vehicles with Audi connect
Information on flights and current arrival/depar­
ture times in the selected sear ch area.
.. Select and confirm Flight information.
You ca n sele ct the desire d in fo rmation using the
r
igh t control button.
City events
Applies to vehicles with Audi connect
Inform ation on even ts in vario us ca tegories in
the desired searc h area.
.,. Sele ct a nd confir m City events> left control
butto n > category.
Online news
Applies to vehicles with Audi connec t
Check the most current headlines of your favorite
publicat i
ons in the MMI.
.,. Select Online news> headline.
123

Downloaded from www.Manualslib.com manuals search engine Audi connect
Facebook
Applies to vehicles wit h Audi c o nn ect
You can access the most important functions in
your Facebook account through your MMI.
Requirement:
You must have a Facebook account.
You must have connected your myAudi account
with Facebook.
You must have connected your vehicle with
myAudi ¢ page 122.
... Select Facebook > left control button > desired
function
(for example, News Feed).
The following categories can be selected in the
Facebook menu:
-News Feed: new posts (for example, by friends
or groups) are displayed.
-Timeline : your Facebook timeline is displayed.
-Messages: messages you have received are dis-
played.
-Places nearby: places nearby are displayed
that, for example, were recommended by your
friends. You can narrow the search further by
entering categories.
-Events: events to which you were invited are
displayed.
The following functions are available, depending
on the Facebook category you have selected:
-What's on your mind?: you can publish a new
Facebook status using pre-made templates or
using customized myAudi templates.
-Where are you? : you can specify your current
location and make it visible.
@ Tips
-You can find additional information on con­
necting your myAudi account with Facebook
in the Audi connect (myAudi) operating
manual at www.audi.com/myaudi.
-You can only connect one Facebook account
with your myAudi account.
-Other settings such as account and privacy
settings cannot be changed in the MMI.
124
These changes must be made on the Face­
book website.
-You can also create individual text tem­
plates online at my.audiusa.com.
-Audi connect makes it possible to access
Facebook. Permanent availability cannot be
guaranteed, because that depends on Face­
book.
Twitter
Applies to vehicles wit h Audi connect
You can access the most important functions in
your Twitter account through your MMI .
Requirement:
You must have a Twitter account.
You must have connected your myAudi account
with Twitter.
You must have connected your vehicle with
myAudi ¢page 122.
... Select Twitter > left control button > desired
function
(for example, Trends).
The following categories can be selected in the
Twitter menu:
-My Tweets : News Feed and the Tweets you have
posted are listed.
-Home: the Tweets for everyone you follow are
displayed.
-Trends : topics on Twitter that are currently
popular within a country.
Different functions are available depending on
the Twitter category you have selected:
-New tweet: you can post a new tweet using
pre-made templates or using individualized
myAudi
templates.
- Refresh : the selected Twitter function is re­
freshed.
-Set as favorite : set a Tweet as favorite to show
you liked it.
-Retweet: you can quote a Tweet to share it with
others. .,,.

Downloaded from www.Manualslib.com manuals search engine ..... N
Navigation
Opening navigation
Applies to: veh icles with navigation system
Nav igation
The navigation system directs you to your destination, around traffic incidents and on alternative
routes, if desired.
Fig. 114 Example image: Enter destination menu
•Select: INAV/MAPI button.
After opening
the Navigation menu, the Enter
d
est ina tion menu ¢ fig. 114 appears in the Info­
tainment system display with the following infor­
mation:
CD Input field for free text search¢ page 132
@ Home address r:!;> page 133
® Last destinations¢ page 132
@ Stored favorites C>page 133
If you have connected a cell phone with the MMI,
your directory contacts w ill also be listed if they
have navigation data assigned to them.
Your favorites@) and directory contacts are only
displayed
in the Ente r de stination menu when
you have entered one or more letters using the
input field.
M ap pre view
- Se lect an entry from the list.
When selecting an entry from the list, the corre­
spondi ng destination will always be shown to you
as a map preview®~ fig. 114.
Switching between the destination entry and
the map
- Press the INAV/MAPI button repeatedly until
the map is displayed . Or: select the left control
button > Swit ch to map .
_&.WARNING
-The demands of traffic require your ful l at­
tention. Read and follow the guidelines pro­
vided in r:!;>page 95.
-Obey a ll traffic laws when driving.
- The r
oute calculated by the navigation sys-
tem is a recommendation fo r reaching your
destination. Obey traffic lights, stopping re­
s trictions, one-way streets, lane change re ­
strictions, etc.
CD Note
-If the driving directions conflict with traffi c
laws, obey
the traffic laws.
- Adjust th e
volume of th e navigation system
so signals from outside the vehicle, such as
police
and fire siren s, can be heard cle arly at
all times.
@ Tips
-Snow and obstru ct ions on the G PS antenna
or interference caused by trees and large
- 1
131

Downloaded from www.Manualslib.com manuals search engine Navigation
buildi ngs can impair satellite reception and
affect the system's ability to determine the
vehicle position. Several deactivated or mal­
function ing satel lites can also interrupt GPS
reception and affect the system's ability to
determi ne the vehicle position.
- Because
street names sometimes change,
the names stored in the MMI may in rare
cases differ from the actual street name.
Entering a destination
Free text search
Applie s to: vehi cles with naviga tion syst em
You can quickly and easily search destinations
using the free
text search and transfer them to
route guidance.
Using the MMI touch control pad, yo u can enter
the data fo r a naviga tion destination in any order
all at once (for example, monument Washing­
ton). Likewise, you can
search for points of inter­
est, contacts, previous destinations or favorites
to navigate to the desired address.
.,.. Press the I NAV/MAPI repeatedly until the Enter
destination
menu is displayed ¢page 131,
fig. 114.
.. Keep turning the control knob to the left unti l
the input field appears.
-Write one or more search terms i n the input
field ©¢ page 131, fig. 114. A list of all re ­
sults found will appear in the Infotainment sys­
tem display.
-
Select and confirm a destination from the re-
sults list.
-
Select and confirm Start route guidan ce .
The route is displayed as an ove rview in the m ap
and the route guidance is already active.
Narrowing the search area
-Se lect: right control button > Country /State
selection .
All countries/states are selected at the factory
for the free text search. Using the Country/State
selection ,
you can deselect the irre leva nt coun­
tries/states to i ncrease th e search speed and nar­
row th e res u
lts list.
132
(D Tips
- The MMI input suggestions depend on the
last navigated destinations.
-
Up to SO entries can be stored in the last
destinations list.
- Additional
information on free text search ­
ing can be found
under¢ page 102.
Loading last destination
Applies to: vehicles with nav igation syst e m
Your Last destinations are automatically stored
and can be directly loaded as a destination
ogoin .
.,.. Press the I NAV/MAPI repeatedly un til the Enter
destination
menu i s displayed ¢ page 131,
fig. 114.
Your last destina tions will be listed directly in the
Ente r destination menu and are marked wit h the
symbol @¢page 131, fig. 114.
- Sele ct and confirm a prev ious destina tion.
-
Select and confirm Start route guidance .
Delete last destinations
-Select and confirm a previous destination from
the list .
-
Select and confirm : right control button >De·
lete .
-Select and confirm Delete this la st destination
or Delete all last destinations .
The selected destination or all last destinations
is/are deleted and are no longer displayed in the
free text search .
Entering an address
Applies to: vehicles with navig ation syste m
.. Press the I NAV/MAPI repeatedly until the Enter
destination
menu i s displayed¢ page 131,
fig. 114.
.. Select: left control button > Ent er address .
-Select and confirm a line (such as Street , House
number
or Country /State ) and enter the de­
sired information.
-Select and confirm Start route guidance .