turn signal AUDI TT ROADSTER 2018 Owners Manual

Cl 00 .-< N r-­N .-< 0 r-­Vl 00
@ Note
Never drive until the tank is completely emp­
ty. The irregular supply of fuel that results
from that can cause engine misfires. Uncom­
busted fuel will then enter the exhaust sys­
tem. Th is can cause overheating and damage
to the catalytic converter.
Indicator lights
Description
The indicator lights in the instrument cluster
blink or turn on. They indicate functions or mal­
functions.
With some indicator lights, messages may ap ­
pear and warning signals may sound. The indica ­
tor lights and messages in the display can be cov­
ered by other displays. To show them again, se­
lect the tab for indicator lights and messages us­
ing the multifunction steering wheel
¢ page 17. If there are several malfunct ions,
you can display them one at a time us ing the
thumbw heel.
Some ind icator lights in the d isplay can display in
several colors .
Overview
Some indicator lights turn on briefly as a function
check when you switch the ign ition on. These sys­
tems are marked with a
./ in the following tables.
I f one of these indicator lights does not turn on,
there is a ma lfunction in that system.
Red indicator lights
---------------
US A models : brake system ./
¢page 10
Canada models: brake system ./
¢page 10
USA models: electromechanical
parking
brake¢ page 11
Canada models: electromechanical
parking
brake¢ page 11
Cooling system
¢ page 12
Instruments and indicator lights
Engine oil pressure
¢ page 12
Alternator
¢p age 12
Engine stop while driving
¢page 13
Safety be lt
¢ page 13
Electromechanical steering./
¢page 89
Steering lock
¢page 13
Central indicator light
¢page 13
En gine start system
¢page 13
Transmission ma lfunction
¢ page 68
Rear spoiler
¢page 90
Yellow indicator lights
Electronic Stabil iz ation Control (ESC)
./ ¢p age 13
Electronic Stabilization Contro l (ESC)
./ ¢pag e 13
USA models: anti-lock braking sys­
tem
(ABS)./¢ page 13
Canada models: anti-lock braking
system
(ABS)./ ¢ page 13
Safety systems ./
¢page 14
USA models: brake pads ¢page 14
Canada models: bra ke pads
¢ page 14
Electromechanical parking brake
¢page 11
Tire pressure
¢ page 261 or¢ page 262
Tire pressure
¢ page 261 or¢ page 262
9

Instruments and indicator lights
<;v! Windshield wipers
i,ij Windshield wipers: malfunction! Pl ease
c ontact Servic e
There is a malfunc tion with t he w indshie ld w ip­
ers .
D rive to an authori zed Aud i dea ler or aut hori zed
Aud i Serv ice Facility immediately to have the
malfunc tion corrected .
-: If t he II indicato r light tur ns on, a b ulb has
fa iled. The message in dicat es t he loca tion of the
b ul b.
Re place the bulb immedia tely .
Vehicle lights: malfunction! Please contact
Service
There is a malfunction in the head lights or t he
light switch . D rive to an autho rized A udi dealer or
author ized Audi Se rvice Facility immed iate ly to
have the ma lf u nct ion co rrected.
A WARNING
- L igh t bu lbs are under pressu re and can ex­
plode when bulbs are replaced, which in ­
cr eases t he ris k of injury.
- W it h gas-discharge lam ps* (xenon head­
l igh ts), th e high-voltage component must
be handle d ap propriate ly. Otherwise, t here
is a risk of fa tal in jury.
~[) Headlight range control system
II Headlight range control : malfunction! See
owner 's manual
T here is a malfunc tion in the hea dlight range
con trol sys tem, w hich m ay cau se g lare fo r othe r
d rivers.
D rive to an a utho rized Aud i dea le r or a uth orized
Au di S ervice Fac ility immedia tely to have t he
malfunc tion co rrecte d.
16
-
~O Audi adaptive light
Applies to: vehicles with Audi adaptive light
JII Audi adaptive light : malfunction! See own­
er's manual
There is a ma lf u nction in the adap tive ligh ts. T he
headlig hts still funct ion .
D rive to an author ized A udi dealer or autho rized
Audi Se rvice Fac ility immed iate ly to have the
malfunction correc ted .
~D Light/rain sensor
Applies to: vehicles with light/rain sensor
El Automatic headlights : malfunction! See
owner's manual
m Automatic wipers: malfunction ! See owner's
manual
The light/ rain sensor is malfunctioning.
The low beams remain sw itche d on at all times
fo r safety reasons whe n the light switch is in t he
AUTO position. Yo u can cont in u e to turn t he
li ghts on and
off using the lig ht switch . You can
still contro l all w iper fu nctions t hat are inde­
pende nt of t he rain senso r.
D rive to an authorized A udi dealer or autho rized
Audi Se rvice Facility immed iate ly to have the
malfunction cor rected .
g Suspension control
Applies to: vehicles with Audi drive select
B Suspension: malfunction! You may continue
driving
There is a suspension contro l ma lf u nction.
D rive to an authorized A udi dealer or autho rized
Audi Se rvice Fac ility immed iate ly to have the
malfunction cor rected .
¢¢ Turn signals
If the. or B in dicator lig ht blinks, a tur n sig­
nal is tu rned on .
If both indica to r lights are bl ink ­
i ng, t he emergency flashers are on .

Opening and clo sin g
Opening and closing
Central locking
Description
You can lock and u nlock the veh icle centrally. You
have the following options:
- Remote control key
i:> page 24,
- Sensors in the door handles* c> page 25,
-Lock cylinder on the driver 's door c> page 27,
or
- Interior central locking switch
c> page 26.
Auto Lock
The Auto Lock funct ion locks all doors and the
luggage compartment lid once the speed has ex­
ceeded approx imately 9 mph (lS km/h).
The vehicle can be unlocked if the opening func­
tion in the centra l locking system sw itch is used
or one of the door handles is pulled. The Auto L ock function can be switched on and off in the
Infotainment system
c> page 26.
I n t he event of a crash with a irbag deployment ,
the doors will a lso automat icall y unlock to allow
access to the vehicle .
Selective unlocking
The doors and luggage compartment lid w ill lock
when they close. You can set in the Infotainment
system whether
only the driver's doo r or the en­
tire veh icle should be unlocked when unlocking
c>page26.
Turn signals
The turn s ignals flash tw ice when you un lock the
veh icle and flash once when you lock the veh icle .
I f the blin king con tinues, one of the doors or the
luggage compartment lid is not closed or the ig­
nition is still switched on .
Unintentionally locking yourself out
Only lock your vehicle when all of the doo rs and
the luggage compa rtment l id a re closed and the
remo te control key is no t in the vehicle. This
he lps to prevent yo u from locking yourself out
accidentally.
22
The following conditions prevent yo u from lock ­
ing your remote control key in the vehicle:
- If the driver's door is open, the vehicle can not
be locked by press ing
the ~ button on the re­
mote contro l key or by touching the locking
sensor* on a door .
- If the mos t recently used conven ien ce key* is
detected in the luggage compartment, the lug­
gage compartment lid automatica lly unlocks
again after closing it.
- If the convenience key* that was last used is de­
tected inside the vehicle, then the vehicle can­
not be locked from the outside.
(D Tips
- Do not leave va luables unattended in the ve­
hicle. A locked vehicle is not a safe!
- The LED i n the driver's door rail b links when
you lock the vehicle. If the LED lights up for
approximate ly 30 seconds after locking,
there is a malfunction in the central locking
system. Have the problem corrected by an
authorized A udi dealer or autho rized Aud i
Service Facility .
Key set
Fig. 12 Your ve hicle key set
(D Remote or con venience key*
.. .... N 0
ti
The convenience key* is a remote control key with
special functions
c> page 25 and c> page 58.
You can unlock/lock your vehicle with the remote control key . A mechanical key is integrated in the
remote control key
c> page 23 .
@ Key ta g w ith vehicle code*
The vehicle code* on the key tag can be rubbed
off. It does not have a function .

Cl co ..... N ,....
N ...... 0
Fold mirrors* -if yo u se lec t On , the exterior rear­
view mirrors fold in automatically when you press
the
[ml button on the remote cont rol key o r touch
the sensor* in the hand le.
Lo ck when driving1> -if you select On , the vehicle
l oc ks automatically when driving . A ll of the doors
and the luggage compa rtment lid lock.
Mechanically unlocking and locking the
doors
If the central locking fails , you mus t unlock/lock
t he doors separa tely.
F ig. 19 Dr iver 's door: doo r loc k cy lin der
F ig. 20 Fro nt passenger 's doo r: e merge ncy re lease
Unlocking/locking the driver's door with the
mechanical key
.. Remove the mechan ica l key o:!> page 23 .
.. To unlock the driver's doo r, turn the key to the
unlock positio n in the direction of arrow
(I)
r=> fig . 19.
.. To lock the driver's door, move the selector lev­
er to the P position (automat ic tra nsmission)
and tu rn the key
one t ime to the lock position
in the d irect ion of ar row @.
,....
"' l) Thi s fun ctio n is not avail able in al l coun tries. co
Opening and closing
Locking the front passenger's door with the
mechanical key
The mechanical lock is located on the edge of the
front passenger's door . It is only vis ible when the
door is open.
.. Remove the mechanical key .:!> page 23.
.. Remove the cap from the openi ng ¢ fig . 20 .
.. Insert the key into the slot inside and turn it a ll
the way to the right (r ight door) or to the left
(left door*).
Once the front passenger 's door is closed, it is no
longer possible to open it from the outs ide . The
door can be opened from the inside by pull ing
t h e door handle.
Anti-theft alarm system
If the anti-theft alarm system detects a vehicle
brea k-in, audio and visual warn ing signals are
t rigge red. The anti -theft a la rm sys tem is swi tc h­
ed o n or off when lock ing/ unlo cki ng your ve hicle.
If the alarm is triggered, i t will shut off a utomat­
ica lly after a certain amount of time.
Switching the alarm off manually
.,. To swit ch t he a la rm off, press t he@ b utton on
t he remote cont rol key o r switch the ig nit io n
on.
Break-in security feature
T he alarm will sound if there is a break-in at the
doo rs , hood, and/o r luggage compa rtment lid.
Luggage compartment
lid
Opening/closing the luggage compartment
lid
Opening the luggage compartment lid
.,. Press the e5 button on the remote con trol key
for at least severa l seconds to open the luggage
comp artment lid. Or
.. Lift the luggage compa rtment lid . ..,_.
27

Cl co ..... N ,....
N ...... 0 ,....
Vl co
Programming the transmitter
Applies to: vehicles with garage door opener (Homelink)
Fig. 26 Distance betwee n the radia tor grille and t he re­
mote control transmitter
Programming the button: step 1 on the
control panel
1. Switch the ignition on.
2. Press both of the outer buttons on the con­
trol unit
c:, page 30, fig. 25 unt il the yellow
LED @turns off and the green
LED (!) blinks.
This procedure clears the standard codes that
were set at the factory and does
not need to
be repeated again to program the other but­
tons .
3. Briefly press the button in the control panel
that you want to program.
4. Wait until the yellow LED@blinks. The pro­
gramming mode is active for five minutes.
S. Go in front of the vehicle with the original re­
mote control transmitter for the system that
you are programming to the control panel button.
Programming the button: step 2 at the
radiator grille
6. Hold the remote control transmitter at the
vehicle radiator grille
¢fig . 26 .
7. Now press the remote control transmitter
until the turn signals on your vehicle blink.
This can take up to 30 seconds.
8 . If the emergency flashers blink three times,
the programming was successful. If the
emergency flashers only blink one time, the
five-minute time limit for programming has
expired or the programming was unsuccess­
ful. Repeat the programming procedure
starting from the third step or change the
distance to the radiator grille .
Opening and closing
9. If the garage door or other systems do not
open with the Home link buttons even if the
programming was successful, the system
may use a ro lling code instead of a fixed
code. You must also then perform
rolling
code programming
c:, page 32 .
The other two buttons in the control panel can be
programmed using the instructions given above.
Start with step 3.
Deleting button programming
The programmed buttons cannot be deleted indi­
vidually. They must be deleted all at once. Repro­
gram the buttons if necessary.
"' Switch the ignit ion on.
"' Press both of the outer buttons on the control
unit until the yellow LED@turns off and the
green LED
0) blinks.
Reprogramming buttons
"' Switch the ignit ion on.
"'To reprogram an individual button, press the
desired button until the green LED
0) turns off
and the yellow LED@starts to blink (after ap­
proximately 20 seconds). Release the button immediately. The programming mode is active
for f ive minutes.
"'Continue w ith step 5 .
(D Tips
-The d istance needed between the remote
control transmitter and the Homelink mod­
ule in the radiator grille
c:, fig. 26 depends
on the system you are programming.
- Depending on the system model, you may need to release the button on the remote
cont rol transmitter while it is programming
and press it again. Hold every position you
try when programming for at least 15 sec­
onds before trying a new position. Keep an
eye on the vehicle turn signals while doing
this.
31

Lights and Vision
Lights and Vision
Exterior lighting
Switching lights on and off
F ig. 37 Instrument panel: l ight sw itch
Light s witch ·~ ·
I
Turn the switch to the corresponding position.
When the lights are switched on, the
;Do: symbo l
turns on.
0
• lights are off (in some markets, the daytime
running lights* are switched on when the ignition
is switched on.)
-USA models : the daytime running lights switch
on automatically when the ignition is sw itched
on and the light switch is set to the
O or the
AUTO position (only in daylight). The Daytime
runn ing lights
can be switched on and off in
the
MMI c::;, page 39 c::;, ,&. .
-Canad a models: the dayt ime running lights
switch on automatically when the ignition is
switched on and the light switch is set to the
0 ,
:'.Do: or the AUTO position (only in daylight) c::;, ,&. .
AUTO* - automatic headlig hts switch on and off
depending on br ightness, for example in tw ilight,
during ra in or in tunne ls .
;Do: -Parking lights
tD -Low beam headlights
1~"' 1-All-weather lights*
@!I -Rear fog light(s)*
All-weather light s*
In vehicles with a ll-weathe r lights, the front
lights are adjusted automatically so that yo u are
38
less likely to see g lare from your own head lights,
fo r example when driving on a wet road.
Automatic dynamic headlight range control
system*
Your vehicle is equipped with a headlight range
contro l system so that there is less g la re for on­
coming t raffic if the vehicle load changes. The
headlight range also adjusts automatically when
braking and accelerat ing.
Light function s
The following light funct ions may be ava ilable
depending on ve hicle equipment and only f unc­
tion when the light switch is in the AUTO posi ­
t ion.
Static cornering light* (vehicles with LED head ­
li ghts) - the corne ring light switches on automat­
i ca lly when the steer ing whee l is turned at acer­
ta in angle at speeds up to approximately 44 mph
(70 km/h) and when the turn signal is activated
at speeds up to approximately 25 mph (40 km/ h) . The area to the side of the veh icle is illum ina t­
ed bette r whe n turn ing .
Highway l ight function * (vehicles with LED head­
li ghts)
-this function adapts the lighting for
highway driv ing based on veh icle speed .
Speed dependent light dist ribution* (vehicles
with LED headlig hts) - the speed dependent light
distribution adapts the light in towns and on
highways or expressways . Intersections can a lso
be illuminated on veh icles w ith a navigat ion sys­
tem*.
& WARNING
- Autom atic headlig hts * are o nly in tended to
assis t the driver. They do not relieve the
driver of responsi bility to check the head­
lights and to t urn them on manually based
on the current light and v is ibility conditions.
For examp le, fog cannot be detected by the
light sensors . So always switch on the low
beams under these weather cond it io ns an d
when dr iv ing in the da rk
tD.
-To prevent gla re for traffic be hind you r vehi-
cle, the rear fog lights* sho uld only be
..,.

Cl co .... N ,..._
N .... 0 ,..._
Vl co
turned on in accordance with traffic
reg ulations.
- If the battery has been discharging for a
while, the parking light may sw itch off auto­
matically. A lways make sure your vehicle is
parked and adequately lit according to the
laws . Avo id using the parking lights for sev­
era l hours.
- Always observe legal reg ulat ions when us­
ing the light ing systems described.
(!') Tips
- The light sensor for the automatic head ­
lights* is in the rearview mirror mount. Do
not place any stickers in this area on the
windsh ield.
- Some exterior lighting fu nctions can be ad­
j usted
c::> page 39.
- If you turn off the ignition wh ile the exterio r
lights are on and open the door, a warning
tone so unds.
- In some markets, the ta il lights will sw itch
on when the dayt ime runn ing lights sw itch
on.
- In cool o r damp weather, the inside of the
headlig hts, tu rn s ignals and tai l lights can
fog over d ue to the tem perature d ifference
betwee n the inside and ou ts ide. They will
clea r shor tly after sw itch ing them o n. This
d oes not aff ect t he serv ice life o f the lig ht­
i ng.
Turn signal and high beam lever
The lever opera tes the turn sign als, the high
beams and the headlight flasher .
Fig . 38 Tu rn signal an d high beam lever
N
0
~
"'
Lights and V ision
Turn signals ¢ 9
The turn signa ls act ivate w hen yo u move the lev­
er into a turn signa l posit io n when the igni tion is
switched on .
©-Righ t turn signal
@ -Left tur n signal
The turn signa l blinks three t imes i f you tap t he
lever (convenience t urn signa l).
High beams and headlight flasher
~D
Move t he lever to the corresponding position:
@ -High beams o n
@-High beams off or headlight flasher
T he
II indicato r light in t he inst rument cl uster
turns on .
A WARNING
-High beams can cause glare for other drivers,
which increases the risk of an accident. Fo r
this reaso n, only use the high beams or the
headlight flasher when they wil l not create
g la re fo r ot her dr ivers.
Adjusting the exterior lighting
The functions are adjusted in the Infotainment
system .
.,. Select in the Infotainment system: I MENU ! but­
ton> Vehicle > left control button >Vehicle set­
tings > Exterior lighting .
Automatic headlights
You can adjust the following sett ings in the Au­
tomatic headlights menu:
Activation time
-you can a djust if the headlights
switch on Early, Medium or Late according to the
sensit ivity of the light sensor.
Audi adaptive light * -you can sw itch ad ap tive
li gh t
On and Off .
Daytime running lights*
USA models: the daytime runn ing ligh ts can be
switched on or off using the MM I. Se lec t
On or
Off .
39

Cl co .... N ,....
N
wheel will vibrate lightly. In order for this warn­
ing vibration to occur, it must first be switched
on in the Infotainment system. Active lane assist
is ready for operation when the lane marker line
is detected on a t least one side of the vehicle.
The system is design ed for driving on express­
ways and highways and so it only activates at
speeds above approximately 40 mph (65 km/h)
(depending on the market).
Applies to vehicles with side assist* : if you acti­
vate a turn s ignal when active lane assist is ready
and it classifies a lane change as critical because
of vehicles traveling alongside you or approach­ ing you, there will be noticeable corrective steer ­
in g shortly before you leave the lane . This will at­
tempt to keep your vehicle in the lane.
Applies to vehicles without side assist *: the sys­
tem does not warn when it is ready if you activate
the turn signal before crossing the lane marker line. In this case , it assumes that you are chang­
ing lanes intentionally .
A WARNING
- The system warns the driver that the vehicle
is leaving the lane using corrective steer ing.
The driver is always responsible for keeping
the vehicle within the lane.
- The system can assist the driver in keeping
the vehicle in the lane, but it does not drive
by itself. Always keep your hands on the
steering wheel.
- Corrective steering may not occur in certain
situations, such as during heavy braking .
-There may be cases where the camera does
not recognize all lane marker lines . Correc­
tive steering can only take place on the side
of the vehicle where lane marker lines are
detected .
-Other road structures or objects could possi­
bly be identified unintentionally as lane
marker lines . As a result, corrective steering
may be unexpected or may not occur .
8 1l The corrective stee rin g func tion is not avail able in all mar­,..._
~ ket s.
Assistance systems
-The camera view can be restricted, for ex­
ample by vehicles driving ahead or by rain,
snow, heavy spray light shining into the
camera or by dirt on the window . This can
result in active lane assist not detecting the
lane marker lines or detecting them incor­
rectly.
- In certain situations where visibility is low,
the vehicle may switch internally from "ear­
ly " to "late" steering correction
l).
-Under certain conditions such as ruts in the
road, an inclined roadway or crosswinds, the
corrective steer ing alone may not be enough
to keep the vehicle in the middle of the lane .
- For safety reasons, act ive lane assist must
not be used when there are poor road and/
or weather conditions such as slippery roads, fog, gravel, heavy rain, snow and the
potential for hydroplaning. Using active lane
assist under these conditions may increase
the risk of a crash.
Switching on/off
Applies to : vehicles wit h Aud i act ive la ne ass ist
Fig. 78 Turn s ignal lever: but ton for activ e lane ass ist
"' N 0 > u. CD
Fig. 79 W inds hield: camera w indow for ac tive la n e ass ist ..,.
73

Parking systems
Switching on/off
Applies to: ve hicles w ith pa rking system p lus
F ig. 87 Center console: parking aid button
Fig. 88 opt ical distance display
Switching on
• Shift into reverse, or
.. Press the PwA button in the center console
c> fig. 87. A short confirmat ion tone sounds and
the LED in the button turns on .
Switch ing off
.. Drive faster than 6 mph (10 km/h), or
• Press the P,, ,A button, or
.. Switch the ignition off.
Activating automatically
The parking aid is activated automatically at
speeds less than 6 mph (10 km/h) and when ap­
proaching an obstacle from approximately 3.1 ft (95 cm) away. There are audible signals when ap­
proximately 1.6
ft (SO cm) away from the obsta­
cle .
If you press the p,,1.I! button to switch the park­
ing a id off, it can only be reactivated automati­
cally when one of the following conditions is met :
- The vehicle speed exceeds 6 mph (10 km/h).
- The ignition is switched off and back on again.
- The parking brake is set and then re leased.
82
- The selector lever must be in the "P " position.
Segments in the visual display
The segments in front of and behind the vehicle
(vehicles with parking system plus*)
c> fig. 88
help you to determine the distance between your
vehicle and an obstacle. The red lines mark the
expected direction of travel according to the
steering ang le. A white segment indicates an
identified obstacle that is outside of the vehicle's
path. Red segments show identified obstacles
that are in your vehicle's path. As your vehicle comes closer to the obstacle, the segments move
closer to the vehicle . The collision area has been
reached when the next to last segment is dis­
played. Obstacles in the collision a rea, including
those outside of the vehicle 's path, are shown in
red. Do not continue driving forward or in reverse
c> .& in General information on page 80, c>(D in
General information on page
80!
Rearview camera
Introduction
App lies to: vehicles wit h rearv iew camera
Fig. 89 Diagram: lines to ai d in parking
The rearview camera helps you to park or maneu­
ver using the orientation lines .

Parking systems
Switching off
~ Drive faster than 6 mph (10 km/h), or
~ Press the P"'il button, or
~ Switch the ignition off .
(D Tips
-The visual display in the left part of the dis­
play should help you detect the critical vehi ­
cle areas .
- You can change the volume of the signals
and the display
¢page 84.
Perpendicular parking
Applies to: vehicles with rearview camera
This view may be used when parking in a garage
or in a parking space.
F ig. 92 Info ta in ment system: a im ing at a park ing space
Fig. 93 Infota inme nt system: aligning the vehicle
~ Turn the Infota inment system on and shift into
reverse gear.
~ The orange orientation lines (D show the vehi­
cle's d irection of travel. Turn the steering wheel
until the orange or ientat ion lines appear in the
parking space
¢ fig. 92. Use the markings @to
help you estimate the distance to an obstacle.
Each marking represents app roximate ly 3 ft (1
m). The blue area represents an extension of
84
the vehicle 's out line by approximately 16 ft (5
meters) to the rear.
~ Wh ile driving in reverse gear, adjust the steer­
ing wheel angle to fit the parking space using
the orange orientation lines for assistance
¢ .&. in General information on page 83, ¢(D
in General information on page 83. ® repre­
sents the rear bumper. At the very latest, stop
the vehicle when the red or ientat ion
line @
borders an object.
Adjusting the display
and the warning tones
Applies to: vehicles with parking system plus
The display and warning tones can be adjusted in
the Infotainment.
~ Select in the Infotainment system : IMENU! but­
ton
> Vehicle > left control button > Driver as­
sistance> Parking aid.
Signal tones
Front volume -
volume for the front area
Rear volume -volume for the rear area
Entertainment fader -the volume of the audio/
video source is lowered when the parking system
i s turned on.
The new value is given briefly during the adjust­ ment.
{!) Tips
The settings are automat ically stored and as­
signed to the remote control key that is in
use.
Error messages
App lies to: vehicles with rear park ing system/parking system
plus
Rear park assist: malfunction! Obstacles cannot
be detected
Park assist: malfunction! Obstacles cannot be
detected
There is a system malfunction if the LED in the
P'1
1 .ll button blin ks when switc hing on the system .
If the error is not corrected before you switch off Ill-