radio BMW M3 CONVERTIBLE 2012 Owner's Guide

145
BMW Professional radio
Entertainment
>
FMA/AMA: the six stations with the stron-
gest reception are automatically stored or
six stations can be manually stored.
Storing stations
1.
Press the corresponding button as
often as necessary un til the desired fre-
quency range is selected
2. Select station.
3.
… Press and hold the
desired button until the station starts to play
again after a brief interruption.
The memory level and the selected button
are shown on the display.
Recalling stored stations
1.
Press the corresponding button as
often as necessary un til the desired wave-
length band is selected.
2.
… Press the desired but-
ton.
Using the knob on the right:
Turn the knob on the ri ght until the desired sta-
tion is reached.
RDS – Radio Data System
RDS uses the FM waveband to broadcast addi-
tional information, for example the station
names or possibly text messages. When a sta-
tion has several frequenc ies, the radio will auto-
matically switch to the frequency with the best
reception quality.
Over RDS, some stations transmit the type of
the received program, PTY. At the option of the
station, this can be shown briefly on the display,
e.g., messages, NEWS. Using PTY, warnings
regarding catastrophies ca n also be displayed,
e.g., "ALARM". The warning is then played over
the speakers.
Switching RDS on/off
1.
Press the button.
2. Press the button.
When RDS is switched o ff, the PTY function is
also switched off.
Switching program type display on/off
1. Press the button.
2. Press the button.
HD Radio™ reception
Many radio stations transmit analog and digital
signals.
License conditions
HD Radio™ technology is manufactured under
U.S. and Foreign Patents licensed from iBiquity
Digital Corp. HD Radio™ and the HD and HD
Radio logos are proprietary trademarks of iBiq-
uity Digital Corp.
Activating/deactivating digital radio
reception
1. Press the button.
2. Press the button.
3. Press the button.
4. Press the button.
"HD": a station is received digitally.
"(HD)": a station is broadcasting digital signals;
digital radio reception is , however, switched off.
In areas in which the station is not continuously
received in digital mode, playback switches
between analog and digital reception. In this
case, switch off digital radio reception.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

146
EntertainmentBMW Professional radio
Selecting programs from a digital
station
Some stations broadcast several programs. To
select one of these programs:
1. Press the button re peatedly until the
desired digital station is displayed.
If a station broadcasts several programs,
then, e.g., "HD1" is displayed.
2. Press the button.
3. Select the desired program.
Up to eight programs per station can be
selected, "HD1" to "HD8".
Displaying additional information
For digital stations, additional information about
the current track is displa yed, e.g., the name of
the artist.
Press the button.
The information is displayed.
Operation indicators
> "Acquiring": a search for digital stations is
being conducted.
> "No signal": there are no digital stations
within range.
Satellite radio
You can receive more than 100 different chan-
nels of high audio qua lity. The channels are
offered in fixed packages and have to be acti-
vated.
You may experience signal drops and
muting events related to this new tech-
nology. <
Activating or deactivating channels
1. Press the button.
2. Press the button. 3.
Press the button.
4. Select the desired category.
The channels are displayed. This symbol indicate s the current channel.
Activating
1.Turn the knob on the ri ght to select a chan-
nel that is not yet activated.
2. Press the knob on the right to confirm a
channel.
A phone number and the electronic serial
number, ESN, are displayed. When activat-
ing, the electronic serial number is required.
3. To activate the channels:
Dial the phone number.
Deactivating
1. Press the button.
2. Press the button.
3. Press the button for a longer
period.
A phone number and the electronic serial
number, ESN, are displayed. For deactivat-
ing, the electronic serial number is required.
4. To deactivate channels:
Dial the phone number.
Selecting and storing a channel
1. Press the button.
2. Press the button.
3. Press the button.
4. Select the desired category.
5. Select desired channel.
To display all the channels:
Press the button.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

147
BMW Professional radio
Entertainment
To store a channel:
1.
Press the button.
2. Press the button as often as
necessary until the de sired memory level,
SAT 1 or SAT 2, is reached.
3.
... Press and hold the
desired button until the channel starts to
play again after a brief interruption.
Changing to the current channel
Press the button.
Additional information
The name of the channel and additional infor-
mation about the current track is displayed, e.g.,
the name of the artist.
1. Select the desired channel.
2. Press the button.
Changing channels using buttons
Press the button for the corresponding
direction. The next activated channel is
recalled.
Search function
1. Press and hold the button for the
corresponding direction. The activated
channels are shown, one after another, on
the display.
2. Release the button to select the displayed
channel.
Notes
When there is a signal blockage or the transmis-
sion is suspended mome ntarily for more than
4 seconds, a message appears on the Control
Display. Service may be interrupted or unavailable
for specific reasons such as environmen-
tal or topographic conditions and others that
Satellite Radio cannot directly control. Signals
may not be available under tunnels, in parking
garages, next to tall build ings, nearby trees with
dense foliage, nearby mo untains or other possi-
ble strong sources of radio interference. Ser-
vice should resume normally after the source of
signal unavailability has been cleared. <
CD player and CD changer
Starting the CD player
It may take a moment for the CD player to start.
1. Switch on the radio, refer to page 142.
2. Insert the CD with the printed side up into
the CD slot.
If there is already a CD in the CD slot:
1. Switch on the radio, if necessary.
2. Press the button.
3. Press the button.
Starting CD changer
It may take a moment for the CD changer to
start.
1. Switch on the radio, refer to page 142.
2. Fill the CD magazine and insert it, refer to
page 149.
3. Press the button.
4. Press the button.
Selecting a CD
Press the button for the desired CD number.
The corresponding CD nu mber will appear on
the display. At the end of the last track, the next
CD is selected and played.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

148
EntertainmentBMW Professional radio
Changing the music track
Skipping tracks
Press the button as often as necessary
until the desired track is played.
Using the knob on the right:
Turn the knob on the right until the desired
track is played.
Fast forward/reverse
1. Press and hold the button.
Tracks can be heard but are distorted.
2. To cancel the fast forward/reverse, release
the button.
Random order
Press the button.
To terminate the random generator:
Press the button.
Sampling and selecting tracks
Press the button. Samples of all of
the tracks are briefly pl ayed one after another.
To interrupt the functi on and select a track:
Press the button.
Compressed audio files
The CD player and CD changer can also play
CDs with compressed audio data: MP3 and
WMA.
Selecting a track
1. Press the button.
2. Use the knob on the right to select the
desired directory.
> : press the knob on the right to open a
directory.
> : press the knob on the right to close
a directory.
3. Select additional di rectories if desired.
4. Highlight the desired track and press the
knob on the right.
You can browse through the directories during
playback.
To change to the current track:
Press the button.
Track display
If information about the current track has been
stored, it can be displayed.
1.
Press the button.
2. Press the button.
Ejecting the CD out of the CD player
Press the button.
The CD is partially ejec ted from the CD slot.
Installation location of CD changer
At the rear left of the cargo area.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

149
BMW Professional radio
Entertainment
Coupe
Convertible
Removing/inserting CD magazine
Removing CD magazine
T o i n s e r t o r r e m o v e C D s f r o m t h e C D m a g a z i n e ,
you must first remove it from the CD changer.
1.
Push the cover to one side, arrow 1.
2. Press the button, arrow 2.
The CD magazine will be ejected.
Push the magazine back in after at least
2 seconds have passed so that the inserted
CDs can be read in again.
Inserting/removing CDs from the
CD magazine
When loading CDs into or removing them from
the CD magazine, always hold them at their
edges and do not touch the reflective side of the
CD.
> Inserting CDs:
Pull out the desired compartment and insert
the CD with the printed side up.
> Removing CDs:
Pull out the desired compartment and take
out the CD.
Inserting the CD magazine
1.Insert the CD magazine all the way in the
direction of arrow 1 .
2. Close the cover, arrow 2.
The CD changer automatically reads in the
loaded CDs and is then ready for operation.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

150
EntertainmentBMW Professional radio
Operation indicators
CD player
>"Insert CD"
The CD slot is empty.
> "Error CD"
The CD can not be read or is defective.
> "Temp. CD"
The operating temperature is too high.
CD changer
>"Insert CD"
The CD has been inserted incorrectly or the
magazine is empty.
> "Insert MAG"
No magazine is inserted.
> "Load MAG"
The CD contents are currently being read
in.
> "Temp. CDC"
The operating temperature is too high.
Notes
BMW CD players and CD changers are
Class 1 laser products. Do not operate if
the cover is damaged; otherwise, serious eye
injury may result.
Do not use CDs with afte r-market labels; other-
wise, the labels can loosen as a result of the
heat generated during playback and possibly
cause irreparable damage to the system.
Only use round CDs with a standard diameter of
4.7 in/12 cm and do not play CDs with adapters,
e.g. single CDs; otherwise, the CDs or adapters
may jam and it may not be possible to eject
them.
Do not use a combined CD/DVD, e.g. DVD
Plus;
otherwise, the CD/DVD can jam and will no
longer eject. <
General malfunctions
BMW CD players and CD changers are opti-
mized for operation in the vehicle. They may be more sensitive to defective CDs than players for
stationary use.
If a CD can not be played,
first check if the CD is
properly inserted.
Humidity
If there is high humidity, the CD or the focusing
lens for the laser beam may fog up, making it
temporarily impossible to play the CD.
Malfunctions with individual CDs
If there are malfunctions with individual CDs,
then they may be due to the following causes.
CDs that you burned yourself
Potential problems with home-burned CDs are,
for example, inconsistent data generation and
burning processes, as well as low quality or
excessive aging of the blanks that are used.
Only write on the upper surface of CDs with a
writing instrument that is suitable for the pur-
pose.
Damaged CDs
Avoid leaving fingerprints, as well as dust,
scratches or moisture on the CDs/DVDs.
Store CDs in sleeves.
Do not expose CDs to a temperature greater
than 50 6/122 7, elevated humidity, or direct
sunlight.
CDs with copy protection
CDs are often provided with copy protection
from the manufacturer. This can result in CDs
not playing or playing back in only a limited
fashion.
Care
If necessary, clean the reflecting side of the CD
with a commercially available cleaning cloth by
wiping in a straight line from the center out-
wards.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

151
BMW Professional radio
Entertainment
AUX-IN port
Overview
>
It is possible to connect audio devices, e.g.
MP3 players. Sound is output over the vehi-
cle speakers.
> Recommended settings: mid-level tone and
volume settings on th e audio device. Tone
may depend on the quality of the audio files.
Connecting
Lift up the center armrest.
The AUX-In connection is in the center armrest.
Connect the headphone connection or line-out
connection of the device to the AUX-IN port.
Playback
1. Connect the audio device, switch it on, and
using the audio device, select a track.
2. Press the button.
3. Press the button.
Volume
The volume of the sound output depends on
the audio device. If this volume differs markedly
from the volume of the ot her audio sources, it is
advisable to adjust the volumes.
Adjusting volume
1. Press the button.
2. Press the button. 3.
Press the button.
4. Select the desired volume and press the
knob on the right.
USB audio interface
Overview
It is possible to connect external audio devices.
Sound is output over the vehicle speakers.
Options for connecting external
devices
> Connection via USB audio interface: Apple
iPod/iPhone, USB devices, e. g. MP3 player,
USB flash drive, or mobile phones that are
supported by the USB audio interface.
> Connection via the snap-in adapter, when
equipped with extended connectivity of the
music player in the mobile phone: Apple
iPhone or mobile phones. Playback may
only be possible when no device is con-
nected to the AUX-IN port.
Because of the large number of audio devices
on the market, there is no way to ensure that
every audio device can be properly operated via
the vehicle.
Ask your BMW center for suitable audio
devices/mobile phones.
Audio files
Playback of standard audio files is possible:
> MP3
> WMA
> WAV (PCM)
> AAC, M4A
> Playback lists: M3U, WPL, PLS
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

152
EntertainmentBMW Professional radio
File systems
Popular file systems for USB devices are sup-
ported. The format FAT 32 is recommended.
Connecting
1Connection for audio playback:
TRS connector 1/8"/3.5 mm
2 USB interface
Apple iPod/iPhone
Use the special cable adapter for Apple iPods/
iPhones to produce the connection. You can
obtain further informat ion from your BMW cen-
ter or on the Internet: www.bmw.com
To play audio tracks over the vehicle's speaker
system, connect the iPod/iPhone to ports 1
and 2.
The iPod/iPhone's menu structure is supported
by the USB audio interface.
USB device
To protect the USB interface and USB
device from mechanical damage, connect
them with the flexible adapter cable. <
To play audio tracks over the car's speaker sys-
tem, connect the USB device to port 2.
After initial connection
Information about all tracks, e.g. artist or music
style, and the playlists of the USB device are
imported into the vehicle. This process can take
some time. The time required is dependent on
the USB device and on the number of tracks.
Number of tracks
The data from up to four USB devices or for
approx. 20,000 tracks can be stored in the vehi-
cle. If a fifth device is connected or if more than
20,000 tracks are stored, then the data of exist-
ing tracks may be deleted.
Copy protection
Music tracks with integrated Digital
Rights Management (DRM) cannot be
played. <
Starting audio playback
iPod
1. Press the button.
2. Press the button.
USB device
1. Press the button.
2. Press the button.
Changing music tracks
Skipping tracks
It is possible to skip tr acks in the selected direc-
tory.
Press the button as often as necessary
until the desired track is played.
Using the knob on the right:
Turn the knob on the right until the desired
track is played.
Fast forward/reverse
1. Press and hold the button.
The track can be hear d but is distorted.
2. To cancel the fast forward/reverse, release
the button.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

153
BMW Professional radio
Entertainment
Random order
Press the button.
The current track is played to the end.
Then the tracks in the current directory are
played back in random order.
To terminate the random generator:
Press the button.
Selecting a track
Select the desired list, e.g., "LIST":
1. Press the button.
2. If necessary, use the knob on the right to
select the desired directory.
> : press the knob on the right to open a
directory.
> : press the knob on the right to close
a directory.
3. Select additional directories if desired.
4. Highlight the desired track and press the
knob on the right.
You can browse through the directories during
playback.
To change to th e current track:
Press the button.
Track display
If information about the currently selected track
has been stored, it can be displayed.
Press the button.
Adjusting volume
The volume of the sound output depends on
the audio device. If this volume differs markedly
from the volume of the ot her audio sources, it is
advisable to adjust the volumes. 1.
Press the button.
2. Turn the knob on the right until the desired
volume is set and then press the knob.
Displaying the file structure of the USB
device
The entire file structure of the USB device can
be displayed, for example directories without
music files.
Press the button.
Notes
Do not expose the audio device to extreme
environmental conditions , e.g. very high tem-
peratures, refer to the op erating instructions of
the audio device.
Depending on the config uration of the audio
files, for example bi t rates higher than
256 Kbit/s, it is not always possible to ensure
proper playback in every case.
Information on connection
> The connected audio device is supplied
with a max. power of 500 mA if supported
by the device. For this reason, do not addi-
tionally connect the de vice to a charging
socket in the vehicle; otherwise, it may not
be possible to ensure proper playback.
> Do not use force when plugging the con-
nector into the USB interface.
> Do not connect devices such as fans or
lamps to the USB audio interface.
> Do not connect USB hard drives.
> Do not use the USB audio interface to
recharge external devices.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

156
CommunicationsTe l e p h o n e
Telephone
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. Equipment is also described
that is not available because of, for example,
selected options or country version. This also
applies to safety related functions and systems.
Overview
Note
Your BMW is equipped with a full preparation
package mobile phone or hands-free system.
The concept
Mobile phones can be connected to the vehicle
through Bluetooth.
After a suitable mobile phone is paired with the
vehicle once, the mobile phone can be con-
trolled via the radio, the buttons on the steering
wheel, and by voice.
Bluetooth® is a registered trademark of Blue-
tooth® SIG, Inc.
Only make entries when traffic conditions
permit. Do not hold the mobile phone in
your hand while you are driving; use the hands-
free system instead. If you do not observe this
precaution, your being di stracted can endanger
vehicle occupants and other road users. <
Snap-in adapter
The snap-in adapter, refer to page165, makes
it possible to:
> Accommodate the mobile phone.
> Recharge its battery.
> Connect it to an exte rnal antenna of the
vehicle. This assures a better
network connection
and constant sound quality.
A mobile phone that is connected to the vehicle
should not be operated via the mobile phone
keypad; otherwise, ma lfunctions may occur.
Suitable mobile phones
For precise information about which mobile
phones with a Bluetooth interface are sup-
ported by the complete mobile phone prepara-
tion package, go to www.bmwusa.com/
bluetooth.
Notes
At high temperatures, the charging function of
the mobile phone may be limited and some
functions may no longer be carried out.
When using the mobile phone via the vehicle,
follow the instructions given in the owner's
manual for the mobile phone.
Controls
1 Volume control ON/OFF.
>Press: switching radio on/off
> Turn: adjusting volume 160
2 Display
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG