belt BMW MOTORRAD C1 2000 Rider's Manual (in English)
[x] Cancel search | Manufacturer: BMW MOTORRAD, Model Year: 2000, Model line: C1, Model: BMW MOTORRAD C1 2000Pages: 96, PDF Size: 6.39 MB
Page 63 of 96

33
61
Starting – Riding – Parking
B
Easy-lift mechanism
Emergency operation of
the easy-lift mechanism -
lifting vehicle off the stand
Buckle on your seat belt
before starting the journey
Place both your feet firmly on
the ground and take your
weight off the vehicle
Disengage lever B from the
lock by
Moving lever B of the easy-
lift mechanism all the way
forward and up and then
pushing it slowly down
– Keep a firm grip on the lever
– The front wheel is lowered
to the ground
Hold the BMW C1 upright
Press lever A of the easy-lift
mechanism down
Use your foot to retract the
stand
–Engine speed is no longer
limited to idle
– You can pull away from rest
Check that lever B is locked
in its bottom position
Check that the stand is fully
retracted
\f Note:
Have damage to the easy-lift
mechanism rectified immedi-
ately by a specialist workshop,
preferably an authorised
BMW dealer.
Page 66 of 96

33
64
Starting – Riding – Parking
Seat belt
d Warning:
Always follow these instruc-
tions on how to use the seat
belt, as otherwise your safety
is affected and the belt's abil-
ity to protect you is restricted:
Always fasten both seat
belts before pulling away
from rest.
Make sure that both seat
belts are not twisted and
that they are seated snugly
over your shoulders and
pelvis
Make sure that the belts do
not pass over hard or fragile
objects (spectacles, ball-
point pen, etc.)
Make sure that the seat
belts do not pass across
your neck, that they are not
trapped and that they can-
not rub against sharp edges
d Warning:
Always wear the seat belt as
snugly as possible. Avoid
bulky clothing and remem-
ber to pull the belt tight at
frequent intervals. If the belt
were slack the lap belt
could slide over your hips in
a head-on collision and
injury your lower body. In
addition, the restraining
effect diminishes if the seat
belt is slack.
Pregnant women riders
should also wear the seat
belt, making sure that the
lap belt is well down on the
hips and does not press on
the abdominal region.
Page 67 of 96

33
65
Starting – Riding – Parking
Seat belt
d Warning:
Keep the seat-belt straps
clean at all times, because
foreign-matter accretions
can impair operation of the
inertia-reel mechanism.
Make sure that the belt
buckles are not clogged
with foreign matter (paper
or the like), as otherwise the
belt tongues will not
engage.
If the vehicle is involved in
an accident or if the belt
webbing, the connections,
the inertia reel or the belt
buckle is damaged, have
the seat belt in question
replaced and the belt
anchorages checked by a
specialist workshop, prefer-
ably an authorised
BMW dealer.
Important notes on using
the restraint system
In extremely severe weather
conditions and/or on account of
other influences (vehicle is
washed and a frosty night, for
example) individual belt compo-
nents might fail to function cor-
rectly. If this happens (belt
buckle frozen, or similar occur-
rence), do not under any cir-
cumstances use a heat source
to thaw the belt buckle or any
other part of the restraint
system/vehicle.
The use of BMW-approved de-
icers, however, is permitted.
Make sure that the seat belt
does not come into contact
with sharp objects which could
damage it.
If foreign matter causes the belt
buckle to malfunction, have the
fault rectified immediately by a
specialist workshop, preferably
an authorised BMW dealer.
Page 68 of 96

33
66
Starting – Riding – ParkingFastening the seat belts
\f Note:
Always fasten the lap-and-
shoulder belt first, then the
shoulder belt.
A steady pull causes the belts
to unreel, allowing you full free-
dom of movement. Sudden
braking, however, causes the
belt reels to lock.
The reels might also lock if you
ride on cobblestones or hit a
pothole.d Warning:
Make sure that both belts are
positioned about the middle
of your shoulders – never over
your neck – and that they are
snug against your torso.
Make sure that the lap belt
passes over your pelvis – not
your stomach – and that it is
snug.
If necessary, pull the belt
run over your upper body
toward your shoulder
Seat belt
Page 69 of 96

33
67
Starting – Riding – Parking
Seat belt
Special notes on using
seat belts in conjunction
with a crash helmet
L Note:
The following applies in Germa-
ny, Belgium, France, Italy, Aus-
tria, Portugal, Switzerland,
Spain and Turkey:
You are not freed from your
statutory obligation to wear a
crash helmet unless both seat
belts are fastened.
We recommend that you always
ride with both seat belts
correctly fastened.
National legislation applies in
these and in all other countries.
L Note:
The passenger is not integrated
into the safety concept of the
BMW C1, which means that
– the passenger must always wear a crash helmet.
– the passenger should wear suitable protective clothing.
Page 70 of 96

33
68
Starting – Riding – Parking
Seat belt
\f Note:
You must fasten both seat
belts:
– before you can pull away
– The red indicator light
1 in
the instrument cluster goes
out
Fastening the lap-and-
shoulder belt
Hold the tongue of the belt
and pull it slowly and steadily
over your torso and lap to the
belt buckle on the right-hand
side
Push the tongue into the right
buckle until it engages with an
audible click ( tug the belt
sharply to check! )
Fastening the shoulder
belt
Hold the tongue of the belt
and pull it slowly and steadily
over your torso to the belt
buckle on the left-hand side
Push the tongue into the left
buckle until it engages with an
audible click ( tug the belt
sharply to check! )
Releasing the seat beltsRelease the seat belts one at a
time:
Hold the belt with one hand
Press the red button on the
belt buckle
– The spring-loaded tongue
snaps out of the buckle
Allow the reel to roll up the
belt slowly
The red indicator light
1 in
the instrument cluster lights
up
Page 71 of 96

33
69
Starting – Riding – Parking
Central belt releaseThe red lever 1 on the handle-
bar releases both belts at the
same time. This is useful, for
example, in the event of an
accident, if the belt buckle is
awkward to reach!
\f Note:
Both buckles disengage at the
same time.
Take a grip on the two belts
Pull the red lever 1 on the
handlebar
– The spring-loaded tongues
snap out of their buckles
The belts slowly rewind onto
the reels
The red indicator light 1 in
the instrument cluster lights
up
Seat belt
1
Page 76 of 96

33
74
Starting – Riding – Parking
Riding
\f Note:
Your BMW C1 has automatic
transmission.
Always comply with the legisla-
tion applicable to use of the
seat belts and a crash helmet
(
b67).
Preconditions for carrying a
passenger (
b76).
You cannot pull away until you
have fastened both seat belts.
Moving off: Fasten the seat belts (b66)
If applicable, put on your hel-
met (
b67)
Lift the BMW C1 off its stand
(
b58)
Start the engine (
b71)
Switch on the headlight
Speedily increase engine revs
until the BMW C1 pulls away
When the vehicle is rolling
smoothly, place your feet on
the running board
Speedily continue increasing
engine revs until you reach
your desired road speed
\f Note:
The windscreen can fog under
adverse weather conditions.
Engine speedLimit engine speed in accord-
ance with engine temperature,
using the highest engine
speeds only when the engine
has reached its regular operat-
ing temperature.
Accelerating/decelerat-
ing:
Use the throttle twistgrip to
match your speed to the flow
of traffic
Use the brakes in an emer-
gency
( ) Figure in bracketsbpage number for
description
Page 77 of 96

33
75
Starting – Riding – Parking
Stopping:Reduce engine speed
Brake the BMW C1 to a
standstill
– As your speed drops to
walking pace, remove your
feet from the running board
and lower them to the
ground to balance your
BMW C1
Hold the BMW C1 upright
e Important:
Do not park your BMW C1 on a
gradient of more than 6 °/12%,
because on steeper gradients
the stand cannot reliably hold
the vehicle.
Parking/placing the C1 on
its stand:
Switch off the engine (b15)
Lift the BMW C1 onto its
stand/park (
b56)
– Turn the ignition key to the
R position to switch off the
ignition,
Release the seat belts (
b68)
Engage the steering lock
(
b15)
– Push key in position R and
– Turn the handlebar all the
way to the right and turn the
key to the OFF position
– Move the handlebar until
the steering lock engages
( ) Figure in bracketsbpage number for
description
Riding
Page 93 of 96

ii
91
Index
IIgnition switch and steering lock, 9Function, 14-15
Ignition, switching on, 70
Instrument cluster, 10
Instrument panel, 10
LLights Headlight beam throw, 40
Notes, 40
Luggage system, 27
MMoving off, 74
OOctane number, fuel, 33
Odometer, 10
Total distance reading, 12
Trip meter reading, 12
Oil filler neck, 7, 30
Oil level Check, 30
Engine oil pressure, 11, 72
PParking, 75
Pillion passenger, 76
Placing C1 on its stand, 75
RRear brakeBrake fluid level, 36
Brake fluid reservoir, 9
Handbrake lever, 18
Rear seat, 26
Refuelling, 32
Riding, 74-75
Rims, 46
SSafety check, 28
Safety instructions Catalytic converter, 54
General, 52
Seat, 6 Closing, 22
Opening, 22
Seat backrest Installing, 23
Removing, 23
Seat belt Fastening, 66-68
Lap-and-shoulder, 6
Releasing, 68-69
Shoulder, 7
Seat belt buckle Left, 6
Right, 7
Seat lock, 6
Service cover, front See front fairing panel
Service cover, side, 6
Speedometer, 10
I – S