brake sensor BMW MOTORRAD G 650 GS 2010 Rider's Manual (in English)

Fastener, quick-releaseaxle, front
45 Nm
Remove the front-wheel stand.
Apply the front brake and firmlycompress the front forks sever-al times
Tighten axle clamping screw2to the specified torque.
Clamp, front quick-re-lease axle
23 Nm
Insert the ABS sensor into itsbore and install screw1.
without centre standOE
Remove the auxiliary stand.
Removing rear wheel
Make sure the ground is leveland firm and place the motor-cycle on its stand.
Remove two screws1.
Remove three screws2andremove the rear-wheel cover.
without centre standOE
Make sure the ground is leveland firm and place the mo-
8
79
zMaintenance