ECO mode BMW MOTORRAD K 1200 GT 2004 Rider's Manual (in English)

14
General information and controls
1
Toggling between time/
ambient-temperature
reading
• Switch on the ignition
• Briefly press BC-button 1

Note:
Use a ball-point pen or similar in-
strument to press button A or B.
Setting the timePress button A (hours) or
button B (minutes).
Toggling between 12- and
24-hour modes
• Switch off the ignition
• Press and hold down button A
• Switch on the ignition
• Hold down button A for
approximately 3 seconds
longer
Clock
1
AB
10k4101g3.fm Seite 14 Donnerstag, 27. Mai 2004 5:30 17

4
83
Arrive safely
Regular visits to the workshop
for routine servicing are
strongly recommended even
after the warranty period has
elapsed. They are the only way
to be genuinely certain that your
BMW motorcycle is being kept
in perfect working order.
For generous treatment of
claims submitted after the war-
ranty period has expired, evi-
dence of regular maintenance
is essential.Certain signs of
wear may otherwise not be
noticed until it is too late to put
them right at moderate cost.The staff in the authorised BMW
motorcycle dealer's workshop
know every detail of your
motorcycle and can take reme-
dial action if necessary before
minor faults develop into seri-
ous problems. By having the
necessary repairs done prop-
erly and in good time, you save
time and money in the long run.
…ServiceYou can obtain accurate advice
in all cases, and make appoint-
ments with a firm completion
deadline which we will comply
with punctually. But the most
gratifying feeling of all is that
your BMW is in genuinely good
shape when it leaves the
authorised BMW motorcycle
dealer's workshop – and above
all, safe.
Reliability
10k41bkg3.book Seite 83 Donnerstag, 27. Mai 2004 5:30 17