suspension BMW MOTORRAD K 1200 R 2004 Rider's Manual (in English)

i3Introduction
6 Maintenance ............. 87
Toolkit .......................... 89
Engine oil ..................... 89
Coolant ........................ 92
Brakes .......................... 93
Clutch .......................... 96
Wheels ......................... 98
Front-wheel stand ...... 107
Rear wheel stand ....... 108
Bulbs .......................... 109
Jump starting ............. 115
Battery ....................... 116
Spray guard ................ 120
7 Care ......................... 121
Cleaning and care ...... 122
Laying up ................... 124
Restoring to use ......... 125
8 Technical data ........ 127
Threaded fasteners .... 128
Tyre pressures ........... 130
Engine ........................ 131
Power transmission .... 132
Frame and suspension 133
Wheels and tyres ........ 135Fuel and lubricants ..... 136
Electrical system ......... 138
Dimensions and
weights ....................... 140
Riding specifications .. 141
9 Service ..................... 143
BMW Motorrad
service ........................ 144
Confirmation of
maintenance work ...... 147
Confirmation of
service ........................ 151
i Index ......................... 155

Introductioni4
General informationAbout this Rider’s ManualChapter 1 of this Rider’s Man-
ual will provide you with an
initial overview of your motor-
cycle. All maintenance and
servicing work on the motor-
cycle is documented in Chap-
ter 9. This record of the
maintenance work you have
had performed on your motor-
cycle is a precondition for gen-
erous treatment of claims
submitted after the warranty
period has expired.
When the time comes to sell
your BMW, please remember
to hand over this Rider’s Man-
ual; it is an important part of
your motorcycle.
Symbols and
abbreviations
Indicates warnings that
you must comply with for
the sake of your safety and the
safety of others, and to protect
your motorcycle against
damage. c
Special information on
operating and inspecting
your motorcycle as well as
maintenance and adjustment
procedures. c
Depending on national
market specification, this
symbol may appear instead of
the ABS-Symbol.
c Indicates the end of an
item of information.
• Instruction. » Result of an activity.
(
b 4) Reference to a page with
more detailed information.
OE Optional extras you have chosen are taken into
account during produc-
tion of your motorcycle.
OA Optional accessories can be purchased and
retrofitted at your author-
ised BMW motorcycle
dealer.
EWS Electronic immobiliser
ESA Electronic Suspension Adjustment
DWA Anti-theft alarm system
ABS Anti-lock braking system

349Operation
ESA
OE
Electronic Suspension
Adjustment (ESA) makes the
motorcycle’s suspension easy
to adjust to suit changing
surfaces.
Calling up settings Switch on the ignition.
Briefly press button 1.
»The current setting is displayed. 2
Damping set
3 Spring preload set
The reading disappears if you
do not press button 1 within
two seconds.
Adjusting the shock
absorbersYou have a choice of three set-
tings, indicated in field 2 as fol-
lows: Comfort
Soft damping
characteristic Normal
Medium damping
characteristic
Sport
Hard damping
characteristic

8127
Technical data
Threaded fasteners .................... 128
Tyre pressures ............................ 130
Engine ......................................... 131
Power transmission ................... 132
Frame and suspension .............. 133
Wheels and tyres ........................ 135
Fuel and lubricants .................... 136
Electrical system ........................ 138
Dimensions and weights ........... 140
Riding specifications ................. 141Technical data

8133
Technical data
Frame and suspension Frame
Type Main and rear frame in light-alloy design
Location of type plate on the rear cross frame tube
Location of vehicle identification number (VIN) on the side frame section at the front right
Front brake
Type Two floating brake discswith 4-piston fixed calipers
Brake pads Sintered metal
Rear brake
Type One fixed brake disc with 2-piston floating caliper
Brake pads Organic material
Front suspension
Type BMW Duolever
Steering lock angle 2 x 30.3
o
Front wheel castor in normal-load position 101 mm
Rear suspension
Type BMW EVO Paralever swinging arm

Technical data8134
Frame and suspension Front suspension system
Type Central suspension strut with single-tube emulsion-filled shock absorber
Spring travel (bump) 60 mm
Spring travel (rebound) 55 mm
Total suspension travel 115 mm
Rear suspension system
Type Central suspension strut with single-tube gas
pressure shock absorber
Spring preload and rebound-stage damping
infinitely variable
Spring travel (bump) 100 mm
Spring travel (rebound) 35 mm
Total suspension travel (at wheel) 135 mm

Indexi158
LuggageSafety information, 54
Strapping, 45MMotorcycle equipment, 5
Multifunction display, 16NNeutral, telltale light, 20PParking light, 42
Bulb, 17
Replacing bulb, 112
Parking your motorcycle, 71
Power socket,9,80,139
Pre-ride check, 57RRear light, replacing bulb, 113
Rear wheel stand, 108
Replacement keys, 36
Resetting the tripmeter, 38
Residual braking function, 77
Residual range, 38 Restoring to use, 125
Rev. counter, 16
Rider’s equipment, 6
Running in
Brake pads, 64
General information, 63
SSafety check before a journey, 56
Safety instructions, 54
Seat Installing, 44
Lock, 9
Removing, 44
Sensor for instrument cluster lighting, 16
Shifting gear, 65
Side stand Extending, 67
Position on starting, 60
Retracting, 69
Spark plugs, technical data, 138 Speed
Safety information, 54
Technical data, 141
Speedometer, 16
Spray guard, 120
Starter, 15
Starting, 60
Symbols, 4
TTechnical data Dimensions and weights, 140
Electrical system, 138
Engine, 131
Frame and suspension, 133
Fuel and lubricants, 136
Information, 5
Power transmission, 132
Riding specifications, 141
Threaded fasteners, 128
Wheels, 135
Telltale lights, 16, 20
Threaded fasteners, 128