width BMW MOTORRAD K 1200 S 2004 Rider's Manual (in English)

697Maintenance
BMW Motorrad provides
an adapter for removing
the quick-release axle. This
adapter can be combined with
any commercially available
open-end or ring spanner with
width across flats 22. The
adapter with BMW special tool
number 36 3 690 can be ob-
tained from your authorised
BMW motorcycle dealer.c
• Place the front wheel in the
front wheel guide on the
ground.• Roll out the front wheel
forwards.
Installing the front wheel
An overview of the types
of screw used and the
corresponding tightening
torques can be found on
(
b 124).c
Screw connections tight-
ened to the incorrect torque
can come loose or damage
the screw connection itself.
Make sure that you have the
tightening torques checked by
a specialist workshop, prefer-
ably by an authorised
BMW motorcycle dealerc
During the following
work, parts of the front
brake, in particular of the
BMW Integral ABS, can be damaged.
Ensure that no parts of the
brake system are damaged, in
particular the ABS sensor with
cable and the ABS sensor
ring.c
The front wheel must be
fitted in the direction of
rotation.
Observe the direction of rota-
tion arrows on the tyres or on
the rim.c
• Roll the front wheel into the
front wheel guide.

8137
Technical data
Dimensions and weightsDimensions
Maximum length 2,214 mm
Maximum width 858 mm
Maximum height (without rider) 1,220 mm
Seat height 820 mm
Wheelbase in normal-load position 1,572 mm
Ground clearance in normal-load position 120 mm
Weights
DIN unladen weight 248 kg
Permissible gross weight 450 kg
Maximum payload 202 kg
Permissible wheel loads
Front 160 kg
Rear 290 kg