2
39
Safety check
1Adjusting beam throw
L Note:
When the basic setting is cor-
rect, headlight beam throw is
regulated when spring preload
is adjusted to suit load.
Have the headlight basic set-
ting adjusted by a specialist
workshop, preferably an
authorised BMW motorcycle
dealer.
L Note:
Adjust beam height so that
oncoming traffic is not dazzled.
Make sure that the throw of the
light cone adequately illumi-
nates the road ahead of you.
Adjusting to suit
load (
b 46): Change the spring strut set- ting to suit the load
(
b 41-42)
– Spring preload has an effect on headlight throw
If the load carried on the motor-
cycle is very high, the headlight
beam setting can also be cor-
rected by moving lever 1. The
beam is lowered if lever 1 is
moved down.
Lights
10sbkg4.bk Seite 39 Dienstag, 29. Juni 2010 9:21 09
85
Index
i
F - P
GGear shifts, 64, 65
General viewleft side, 4
right side, 5
HHandbrake lever, 27
Handlebar fittingleft, 10
right, 11
Handlebar levers, 26, 27 clutch, 26
handbrake, 27
Hazard warning flashers, 12
Headlight beam setting for RHD/ LHD traffic, 38
Headlight beam throw
adjustment, 38
Heated handlebar grips, 11
Helmet holder, 4, 5
High/low (dipped) headlight switch, 10
Horn, 10
Hydraulic fluid brakes, 30, 31, 32
clutch, 37
IIgnition switch and steering lock, 6function,8,9
Ignition, switching on, 58, 59
Important notes, 50
Installing System case, 19 Instruments, 6
Integral brake, 70
KKill switch, 11
LLight switch, 11
Lights
general instructions, 38, 39
headlight beam throw, 38, 39
Load, 45, 46
MMotorcycle accessories, 81
NNeutral, 59
OOctane number (fuel), 25
Oil filler, engine, 4, 22
Oil level
checking, 22
engine oil pressure, 6, 63
sight glass, 23
Opening the System case, 17
Overheating, 60
PPartially integral brakes, 70
Power socket, 5
Printed information, 5
10sbkg4.bk Seite 85 Dienstag, 29. Juni 2010 9:21 09
