remote control BUICK RANDEZVOUS 2007 Owner's Manual

Seats and Restraint Systems
....................... 7
Front Seats
.............................................. 9
Rear Seats
............................................. 15
Safety Belts
............................................ 30
Child Restraints
...................................... 57
Airbag System
........................................ 88
Restraint System Check
....................... 104
Features and Controls
.............................. 107
Keys
..................................................... 109
Doors and Locks
.................................. 114
Windows
............................................... 120
Theft-Deterrent Systems
....................... 122
Starting and Operating Your Vehicle
..... 127
Mirrors
.................................................. 142
OnStar
®System
................................... 144
Universal Home Remote System
.......... 147
Storage Areas
...................................... 158
Sunroof
................................................ 169Instrument Panel
....................................... 171
Instrument Panel Overview
................... 174
Climate Controls
................................... 200
Warning Lights, Gages, and
Indicators
.......................................... 211
Message Center
................................... 225
Driver Information Center (DIC)
............ 235
Audio System(s)
................................... 250
Driving Your Vehicle
................................. 301
Your Driving, the Road, and
Your Vehicle
..................................... 302
Towing
................................................. 337
Service and Appearance Care
.................. 351
Service
................................................. 354
Fuel
...................................................... 356
Checking Things Under the Hood
......... 362
Bulb Replacement
................................ 399
Windshield Replacement
....................... 404
2007 Buick Rendezvous Owner ManualM
1

Heated Seats
Your vehicle may have
heated seats. If it does,
the heated seat
switches are located in
the instrument panel
switchbank.
This feature will quickly heat the seat cushions
and lower back of the driver’s and front
passenger’s seat. The left switch is for the driver’s
seat and the right switch is for the front
passenger’s seat.
Press the top of the switch to turn the heater on.
Press the bottom of the switch to turn the
heater off. The heated seat switch will turn off
when the ignition is turned to OFF and will resume
operation when the ignition is turned to ON,
unless the switch is turned off.
Memory Seat and Mirrors
If your vehicle has this
feature, the controls are
located on the driver’s
door panel and are used
to store and recall the
driver’s seat position
and the outside rearview
mirror position.
The settings for these features can be
personalized for both driver 1 and driver 2.
Driver 1 and driver 2 correspond to the memory
buttons labeled 1 and 2 on the driver’s door and to
the numbers, 1 or 2, on the back of the remote
keyless entry transmitters.
11

Keys............................................................ 109
Remote Keyless Entry System.................. 110
Remote Keyless Entry System
Operation............................................... 111
Doors and Locks........................................ 114
Door Locks................................................ 114
Power Door Locks..................................... 115
Delayed Locking........................................ 116
Programmable Automatic Door Locks........ 116
Rear Door Security Locks......................... 116
Lockout Protection..................................... 118
Liftgate...................................................... 118
Windows...................................................... 120
Power Windows........................................ 121
Sun Visors................................................ 122
Theft-Deterrent Systems............................. 122
Content Theft-Deterrent............................. 122
PASS-Key
®III ........................................... 124
PASS-Key®III Operation........................... 125Starting and Operating Your Vehicle......... 127
New Vehicle Break-In................................ 127
Ignition Positions....................................... 128
Retained Accessory Power (RAP)............. 129
Starting the Engine.................................... 129
Engine Coolant Heater.............................. 131
Automatic Transaxle Operation.................. 132
Parking Brake........................................... 135
Shifting Into Park (P) ................................. 136
Shifting Out of Park (P)............................. 138
Parking Over Things That Burn................. 139
Engine Exhaust......................................... 140
Running the Engine While Parked............. 141
Mirrors......................................................... 142
Manual Rearview Mirror............................. 142
Outside Power Mirror................................ 142
Outside Curb View Assist Mirror................ 143
Outside Convex Mirror............................... 143
Outside Heated Mirrors............................. 143
OnStar®System.......................................... 144
Section 2 Features and Controls
107

Universal Home Remote System................ 147
Universal Home Remote System
(With Three Round LED)....................... 147
Universal Home Remote System
(With One Triangular LED)..................... 148
Universal Home Remote System
Operation (With Three Round LED)....... 149
Universal Home Remote System Operation
(With One Triangular LED)...................... 154Storage Areas............................................. 158
Glove Box................................................. 158
Cupholder(s).............................................. 158
Cell Phone Storage Area........................... 159
Overhead Console..................................... 159
Floor Console Storage Area...................... 160
Front Armrest Storage Area....................... 160
Rear Storage Area.................................... 160
Roof Rack System.................................... 161
Convenience Net....................................... 164
Cargo Cover............................................. 165
Rear Convenience Center......................... 165
Sunroof....................................................... 169
Section 2 Features and Controls
108

OnStar®Virtual Advisor
OnStar®Virtual Advisor is a feature of OnStar®
Hands-Free Calling that uses your minutes
to access location-based weather, local traffic
reports, and stock quotes. By pressing the phone
button and giving a few simple voice commands,
you can browse through the various topics.
See the OnStar
®Owner’s Guide for more
information.
OnStar®Steering Wheel Controls
Your vehicle may be equipped with a Talk/Mute
button that can be used to interact with OnStar®
Hands-Free Calling. SeeAudio Steering Wheel
Controls on page 296for more information.
On some vehicles, you may have to hold the
button for a few seconds and give the command
“ONSTAR” in order to activate the OnStar
®
Hands-Free Calling feature.
On some vehicles, the mute button can be used to
dial numbers into voicemail systems, or to dial
phone extensions. See the OnStar
®Owner’s
Guide for more information.
How OnStar®Service Works
In order to provide you with OnStar®services, your
vehicle’s OnStar®system has the capability of
recording and transmitting vehicle information. This
information is automatically sent to an OnStar
®Call
Center at the time of an OnStar®button press,
Emergency button press or if your airbags or AACN
system deploys. The vehicle information usually
includes your GPS location and, in the event of a
crash, additional information regarding the accident
that your vehicle has been involved in (e.g. the
direction from which your vehicle was hit). When
you use the Virtual Advisor feature of OnStar
®
Hands-Free Calling, your vehicle also sends
OnStar®your GPS location so that we can provide
you with location-based services.
OnStar
®service cannot work unless your vehicle is
in a place where OnStar®has an agreement with a
wireless service provider for service in that area.
OnStar
®service also cannot work unless you are in
a place where the wireless service provider
OnStar
®has hired for that area has coverage,
network capacity and reception when the service is
needed, and technology that is compatible with the
OnStar
®service. Not all services are available
everywhere, particularly in remote or enclosed
areas, or at all times.
146

OnStar®service that involves location information
about your vehicle cannot work unless GPS
satellite signals are unobstructed and available in
that place as well.
Your vehicle must have a working electrical
system (including adequate battery power) for the
OnStar
®equipment to operate. There are other
problems OnStar®cannot control that may prevent
OnStar®from providing OnStar®service to you
at any particular time or place. Some examples are
damage to important parts of your vehicle in an
accident, hills, tall buildings, tunnels, weather
or wireless phone network congestion.
Your Responsibility
You may need to increase the volume of your
radio to hear the OnStar®advisor. If the light next
to the OnStar®buttons is red, this means that
your system is not functioning properly and should
be checked by a dealer. If the light appears
clear (no light is appearing), your OnStar
®
subscription has expired. You can always press
the blue OnStar®button to conrm that your
OnStar®equipment is active.
Universal Home Remote
System
Universal Home Remote System
(With Three Round LED)
The Universal Home Remote System provides a
way to replace up to three hand-held
Radio-Frequency (RF) transmitters used to
activate devices such as garage door openers,
security systems, and home lighting.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
The FCC Grant of Equipment Authorization
Certicate number is KOBGTE05A.
147

Universal Home Remote System
Operation (With Three Round LED)
Your vehicle may have the Universal Home Remote
System. If there are three round Light Emitting
Diode (LED) above the Universal Home Remote
System buttons, follow the instructions below. If
there is one triangular LED above the Universal
Home Remote System buttons, follow the
instructions under Universal Home Remote System
Operation (with one triangular LED).
This system provides a way to replace up to
three remote control transmitters used to activate
devices such as garage door openers, security
systems, and home lighting.Do not use the this system with any garage door
opener that does not have the stop and reverse
feature. This includes any garage door opener
model manufactured before April 1, 1982.
Read the instructions completely before attempting
to program the transmitter. Because of the steps
involved, it may be helpful to have another
person available to assist you in programming the
transmitter.
Be sure to keep the original remote control
transmitter for use in other vehicles, as well as, for
future programming. You only need the original
remote control transmitter for xed code
programming. It is also recommended that upon
the sale or lease termination of the vehicle,
the programmed buttons should be erased for
security purposes. See “Erasing your Universal
Home Remote Buttons” later in this section.
Be sure that people and objects are clear of the
garage door or security device you are
programming. When programming a garage door,
it is advised to park outside of the garage.
149

If you do not know if your garage door opener is a
xed code or rolling code device, open your
garage door opener’s remote control battery cover.
Your garage door opener is a xed code device
if there is a panel of switches. If not, your
garage door opener is a rolling code device.
Programming Universal Home
Remote — Fixed Code
Fixed Code garage door openers are used for
garage doors produced prior to 1996. Fixed code
uses the same coded signal every time, which
is manually programmed by setting DIP switches
for a unique personal code.
150

5. After entering the switch settings, press and
release all three buttons at the same time.
The indicator lights will turn on.
6. Press and hold the button you would like to
use to control the garage door until the
garage door moves. The indicator light above
the selected button should slowly blink.
You may need to hold the button from ve to
55 seconds.
7. Immediately release the button when the
garage door moves. The indicator light will
blink rapidly until programming is complete.
8. Press and release the button again. The
garage door should move, conrming that
programming is successful and complete.
To program another device such as an additional
garage door opener, a security device, or
home lighting, repeat Steps 1 through 8, choosing
a different function button in Step 7 than what
you used for the garage door opener.Programming Universal Home
Remote — Rolling Code
Rolling code garage door openers are used for
garage doors produced after 1996 and are
code protected. Rolling code means the coded
signal is changed every time your remote control
garage door opener is used.
Programming a rolling code garage door opener
involves time-sensitive actions, so read the
entire procedure before you begin. If you do not
follow these actions, the device will time out
and you will have to repeat the procedure.
Follow these steps to program up to three channels:
1. Press the two outside buttons at the same
time for one to two seconds, and immediately
release them.
152

2. Go to the garage. Locate the garage door
motor head and press and release the
“learn” button.
After pressing the “learn” button, you have
10 to 30 seconds to complete Step 4
depending on your garage control unit. If you
cannot locate the “learn” button, refer to
the owners guide for your garage door opener.3. Press and hold the button you would like to
use to control the garage door until the
garage door moves. The indicator light, above
the selected button, should slowly blink.
You may need to hold the button from ve to
20 seconds.
4. Immediately release the button when the
garage door moves. The indicator light will
blink rapidly until programming is complete.
5. Press and release the button again. The
garage door should move, conrming that
programming is successful and complete.
To program another device such as an additional
garage door opener, a security device, or
home lighting, repeat Steps 1 through 6, choosing
a different function button in Step 4 than what
you used for the garage door opener.
Using Universal Home Remote
Press and hold the appropriate button for at least
half of a second. The indicator light will come
on while the signal is being transmitted.
153