2016 Citroen BERLINGO MULTISPACE 2016 2.G Manual PDF

 69
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Exceeding the programmed
speedSwitching the function offOperating fault
The programmed speed is cleared then
  replaced   by   three   dashes.
Contact a CITR
o Ë n dealer or a
qualified
  workshop   to   have   the   system  
checked.
Flashing of the speed setting
Good practice
In  any   event,   the   speed   limiter   cannot  
replace the need to observe speed
limits,

  nor   can   it   replace   the   need   for  
vigilance

  on   the   part   of   the   driver.
Always
  pay   attention   to   the   profile  
of the road and sharp acceleration
and

  stay   in   complete   control   of   your  
vehicle.
T

o   avoid   any   jamming   under   the  
pedals:
-

 
ensure
  that   the   mat   and   its   fixings  
on

  the   floor   are   positioned   correctly,
-
 
never
  place   one   mat   on   top   of  
another

.
Pressing the accelerator pedal in order
to
 
exceed
 
the
 
programmed
 
speed
 
will have no ef

fect unless you press
the pedal firmly beyond the point of
resistance.
The
 
limiter
 
is
 
deactivated
 
temporarily
 
and

 
the
 
programmed
 
speed
 
flashes
 accompanied
 
by
 
an
 
audible
 
signal.
To
 
return
 
to
 
the
 
limiter
 
function,
 
reduce
 
your

 
speed
 
to
 
below
 
the
 
programmed
 
speed.
The

 
speed
 
setting
 
flashes:
-

following forcing of the accelerator
point of resistance,
-

 
when

 
the
 
limiter
 
cannot
 
prevent
 
an
 
increase in the vehicle speed due
to

 
the
 
profile
 
of
 
the
 
road
 
or
 
on
 
a
 
steep descent,
-

 
in

 
the
 
event
 
of
 
sharp
 
acceleration. -

Place the switch in position

0 or
switch off the ignition to switch the
system
 
off.
The
 
last
 
programmed
 
speed
 
remains
 
in
 
the

 
memory.
Steering mounted controls
EASE OF USE and COMFORT
4

70
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
VENTILATION
the side vents and the central
vents,
Air flow
the footwells,
the windscreen and the footwells,
the windscreen.
The air distribution can be
modulated
  by   placing   the  
control

  in   the   intermediate  
positions,

  marked   "●".
Air distribution
The air supply distribution is
determined  by   the   following   symbols:
in the red zone, provides
heating of the passenger
compartment. in the blue zone, provides
ambient
 
air,
The speed of the blown air at
the  vents   varies   from   1   to   the  
fastest

  4.   Position   0   switches  
it

  off.
Adjust   this   control   in   order  
to

  attain   the   desired   comfort  
level.
Heating
Manual air conditioning
Temperature
Control positioned:
Ventilation

 71
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Intake of exterior air
Recirculation of interior airAir conditioning A/C
The LEd in the button is
of f.  This   is   the   preferred  
operating

  position.
Pressing the button starts
the
  air   conditioning   system,  
the

  LED   is   on.   Pressing   the  
button again switches the
function of

f and the LE d
goes off.
The air conditioning does not operate if
the
  fan   speed   is   set   to   0.
The air conditioning can only operate
with
  the   engine   running.
The
  LED   in   the   button   is   on.  
Recirculation

  temporarily  
prevents exterior odours
and

  smoke   from   entering   the  
passenger

  compartment.
Used with the setting of the fan speed
(from
 
1
 
to   4),   recirculation   enables   you  
to

 
attain
 
the   desired   comfort   level   more  
quickly

 
with   both   hot   or   cold   settings.
This
 
position   should   only   be   temporary.  
When

 
your   desired   comfort   level   has  
been

 
reached,   return   to   the   intake  
of

 
exterior   air   position   to   permit  
renewal of the air in the passenger
compartment

  and   avoid   misting.  
This
  is  
the

 
preferred   operating   mode.
EASE OF USE and COMFORT
4
Ventilation

72
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Good practice
For maximum cooling or heating of the passenger  compartment,   it   is   possible  
to exceed the value 15 by turning until
LO

  is   displayed   or   the   value   27   by  
turning

  until   HI   is   displayed.
o

n entering the vehicle, the inside
temperature
  may   be   much   colder  
(or
  warmer)   than   is   comfortable.  
There
 
is no advantage in changing the value
displayed

  in   order   to   quickly   reach   the  
level

  of   comfort   required.  
The
  system  
will

  use   its   maximum   performance   to  
reach

  the   comfort   value   set.
DIGITAL AIR CONDITIONING
Automatic operation
AUTO comfort programme
This
  is   the   normal   air   conditioning  
system

  operating   mode. Driver or passenger side comfort
value
The value indicated in the screen
corresponds
  to   a   level   of   comfort   and  
not

  a   temperature   in   degrees   Celsius  
or

  Fahrenheit.
Turn this control to the left
or to the right to decrease or
increase   the   value.  
A 
setting  
around the value 21 provides
optimum

  comfort.   However,  
depending

  on   your   requirements,   a  
setting

  between   18   and   24   is   usual.
d

o not cover the sunshine sensor
located
  on   the   dashboard.
Press this button, the AUTO
symbol
  is   displayed.
The
  system   controls   the  
distribution,

  the   flow   and   the  
intake

  of   air   to   guarantee  
comfort

  and   a   sufficient   circulation  
of

  air   in   the   passenger   compartment  
according

  to   the   comfort   value   set.   No  
further

  action   on   your   part   is   required.Air
  flow   will   increase   gradually   when  
the

engine is cold, to prevent excessive
distribution   of   cold   air.
For   your   comfort,   the   settings   are  
stored when the ignition is switched of

f
and   are   reinstated   the   next   time   the  
vehicle

  is   started.
The   automatic   function   will   no   longer  
be

  maintained   if   you   change   a   setting  
manually

  (AUTO   is   cleared).
SEPARATE SETTINGS FOR DRIVER AND
PASSENGER
Ventilation

 73
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Manual operation
You can, according to your
requirements,  make   a   different   selection from

  that   offered   by   the   system   by
 changing

  a   setting.  
The
  other   functions
 will

  still   be   controlled   automatically.
 Pressing the

AUTO button restores fully
automatic
  operation.
Air distribution
Pressing this button several
times
  in   succession   directs  
the

  air   flow   towards:
-

the windscreen,
-


the windscreen and footwells,
-


the footwells,
-


the side vents, central vents and
footwells,
-

 
the
  side   vents   and   central   vents.Air flow
Press the small fan button to
reduce
  the   flow   or   the   large
fan button to increase the
flow.
On
  the   display,   the   blades   of   the   fan   fill  
when

  the   flow   is   increased.
Switching the air
conditioning On / Off
Press this button, the A/C
symbol
  is   displayed   and   the  
air

  conditioning   is   activated.
Deactivating the system
Press
  the   air   flow   small fan
button
  until   the   fan   symbol  
disappears

  from   the   display.
This action deactivates all
of
  the   system's   functions,   with   the  
exception of the air recirculation and
rear

  screen   demisting   (if   fitted   on   your  
vehicle).

 
Y
our   comfort   setting   is   no  
longer

  maintained   and   is   switched   off.Intake of exterior air /
Recirculation of interior air
Press this button to
recirculate
  the   interior   air.  
The

  recirculation   symbol   is  
displayed.
Pressing the

large fan
button or the AUTO button
reactivates
  the   system   with  
the values set before it was
deactivated.Recirculation prevents exterior odours


and
  smoke   from   entering   the   passenger
 compartment.

 
A
void   prolonged   operation
 in

  interior   air   recirculation   mode   (risk   of
 condensation,

  odour   and   humidity).
Pressing this button again activates the
intake
  of   exterior   air.
Pressing this button again switches off
the
  air   conditioning.
The ventilation outlet, located
in the glove box, diffuses cool
air (if the air conditioning is
on) regardless of the reference
temperature
  requested   in   the  
passenger

  compartment   and  
regardless

  of   the   exterior   temperature.
For
  your   comfort,   do   not   deactivate   the  
system

  for   long   periods.  
EASE OF USE and COMFORT
4
Ventilation

74
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Recommended settings for air conditioning
If I require... Air distribution TemperatureAir flowAir recirculation A/C
Heating -
Cooling
Demisting
Defrosting
With
  automatic   digital   air   conditioning,   operation   in   AUTO   mode   is   recommended,  
irrespective

  of   the   requirement.
Remember
  to   switch   it   off   when   the   ambient   air   suits   your   requirements.
Ventilation

 75
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
DEMISTING AND DEFROSTING
Manual mode
Turn the control to this
temperature  setting.
Increase
  the   air   flow   setting.
Press the air conditioning button.
Returning to exterior air
intake  open   permits   renewal  
of the air in the passenger
compartment

  (LED   off).
Turn the control to this air
distribution
 
setting.
Demisting the rear screen and/
or mirrors
Pressing this button, with the
engine running, activates the
rapid
  demisting   -   defrosting   of  
the

  rear   screen   and/or   electric  
mirrors.
This

 
function   switches   off:
-

when the button is pressed,
-


when the engine is switched of
f,
-
 
automatically
  to   prevent   excessive  
energy

  consumption.
EASE OF USE and COMFORT
4
Ventilation

76
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
DEMISTING AND DEFROSTING
G
OOD PRACTICE
V

ents
"Leave them open"
For
  optimum   distribution   and   diffusion  
of hot or cool air in the passenger
compartment,

  there   are   adjustable  
central and side vents which can
be directed sideways (right or left)
or

  vertically   (up   or   down).   For   your  
comfort

  while   driving,   do   not   close  
them

  and   direct   the   flow   of   air   towards  
the

  windows   instead.
a

ir vents in the footwells and directed
towards
  the   windscreen   complete   the  
equipment.
Do

  not   block   the   vents   located   at   the  
windscreen or the air extractor located
in

  the   boot.
Dust filter, odour filter
(activated carbon)
This filter traps certain dust and limits odours.
Ensure   that   this   filter   is   in   good  
condition

  and   have   all   of   the   filter  
elements

  replaced   regularly.
Refer
  to   the   "Checks"   section   of  
chapter

  7.
Air conditioning
In all seasons, the air conditioning
should only be used with the
windows  closed.   However,   if   the  
interior

  temperature   remains   high  
after

  a   prolonged   period   parked   in  
the

  sun,   first   ventilate   the   passenger  
compartment

  for   a   few   minutes.
Use
  the  
AUT
O   mode   as   much   as  
possible

  as   it   permits   optimised  
control

  of   all   of   the   functions:   air   flow,  
passenger

  compartment   comfort  
temperature,

  air   distribution,   air  
intake

  mode   or   air   recirculation   in   the  
passenger

  compartment.
Operate
  the   air   conditioning   system   for  
5

 
to
 
10
 
minutes,
 
once
 
or
 
twice
 
a
 
month,
 
to

  keep   it   in   good   working   order.
If
  the   system   does   not   produce   cold   air,  
do not use it and contact a CITR

o Ë n
dealer
  or   a   qualified   workshop.
Automatic mode: visibility
programme
The
 
comfort
 
programme
 
(AUTO)
 
may
 
not

 
be
 
sufficient
 
to
 
quickly
 
demist
 
or
 
defrost

 
the
 
windows
 
(humidity,
 
several
 
passengers,

 
ice).
In this case, select the visibility
programme.
 
The

 
visibility
 
programme
 
indicator

 
comes
 
on.
It activates the air conditioning, the air
flow
 
and
 
provides
 
optimum
 
distribution
 
of the ventilation to the windscreen and
side

 
windows.
It
 
deactivates
 
the
 
air
 
recirculation. It
  is   normal   that   the   condensation  
created

  by   the   air   conditioning   system  
results

  in   a   flow   of   water   which   may  
form

  a   puddle   under   the   vehicle   when  
parked.
Ventilation

 77
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Seats
FRONT SEATS
Forwards/backwardsSeat height (driver)
To raise the seat, pull the control
upwards
  then   take   your   weight   off   the  
seat

  cushion.
To lower the seat, pull the control
upwards then push on the seat
cushion.
Seat backrest angle
Lift the bar and slide the seat forwards
or   backwards.
The
 
following
 
adjustments
 
are
 
available: With

  your   back   pressed   against   the  
seat

  backrest,   move   the   lever   forwards  
and

  set   the   required   angle.
EASE OF USE and COMFORT
4

78
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Seats
n
ever drive with the head
restraints
  removed;   they   must   be  
in

  place   and   correctly   adjusted.
Adjustable armrest Front heated seats control
Each front seat may be fitted with a control located on the side part of the
cushion.
Press  to   switch   on   the   cushion   heating.
Press
  again   to   switch   it   off.
Head restraint height
To raise the head restraint, slide it vertically
upwards.
To lower the head restraint, press the
button and slide the head restraint
vertically  downwards.
The
  adjustment   is   correct   when   the   upper
 edge of the head restraint is level with the


top
  of   the   head.
To
  remove   the   head   restraint,   press   the
 button

  and   pull   the   head   restraint   upwards.
To re-install the head restraint, engage
the
  rods   in   the   holes   making   sure   they   are
 aligned

  with   the   seat   back.
To access the vertical position, raise
the  armrest   until   it   locks.
Lower
  the   armrest   to   return   it   to   a  
position

  for   use.
To
  remove   the   armrest,   press   the  
release

 
button
 
from
 
the
 
vertical
 
position
 
and

  move   aside   the   armrest.
To
  put   the   armrest   back   in   place,   clip   it  
in

  the   vertical   position.
If
  the   vehicle   is   fitted   with   the   additional  
console

  and   an   armrest,   to   fold   the  
passenger seat to the table position
remove

  the   console   or   the   armrest.