display CITROEN C-ELYSÉE 2014 Handbook (in English)

189
05USING THE TELEPHONE









PAIRING A TELEPHONE
FIRST CONNECTION

The services offered depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.

Consult your telephone's manual and your operator to fi nd out which services are available to you.

Activate the telephone's Bluetooth function andensure that it is "visible to all" (refer to the telephone
user guide).
Pr
ess MENU . A window is displayed "Search in progress…".
Select the tele
phone to be connected from the list. Only one telephone can be connected at a time.
Select " Search for a device".
For safet
y reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile
telephone with the Bluetooth hands-free system of your audio system must be carried out with the vehicle stationaryand the ignition on.
Visit www.citroen.co.uk for more information
(compatibility, additional help, ...).
Select " Bluetooth connection" andconfi rm.

190

05USING THE TELEPHONE

A virtual keypad is displayed on the
screen: enter a code of at least 4 digits
then press the control knob to confi rm.

A message is displayed on the screen of the
telephone: enter the same code and confi rm.
A message appears in the screen to confi rm the result of theconnection.
Pairin
g can also be initiated from the telephone by searching for detected Bluetooth devices.
Accept the connection to the telephone.

I
f pairing fails, try again; the number of attempts is not limited. The director
y and the calls list can be accessed after the
synchronisation period (if the telephone is compatible).

Automatic connection must be confi gured in the telephone to allow
the connection each time the vehicle is started.

In some cases, the reference number of the tele
phone or the
Bluetooth address may appear instead of the name of the telephone.
Pair/connect the telephone then listen: see the AUDI
O section.








STREAMING - PLAYING AUDIO FILES
VIA BLUETOOTH

191

05USING THE TELEPHONE

To see the telephone status,press MENU.

Select "Telephone
" and confi rm.

Select "Telephone management
" and confi rm.
Select " Telephone status" and confi rm.







TELEPHONE STATUS


The screen displays: the name of the telephone, the name of thenetwork, network signal strength, confi rmation of the Bluetooth connection and the streaming connection.

192


05USING THE TELEPHONE

The telephone connection automatically includes hands free operation
and audio streaming.
The abilit
y of the system to connect to just one profi le depends on the
telephone. Both profi les may connect by default.
Press MENU.
Select " Bluetooth connection" andconfi rm. Indicates connection of the audio steamin
g profi le.


MANAGING CONNECTIONS
Select " Connections management"and confi rm. The list of paired
telephones is displayed.
Select a telephone and confi rm. Indicates connection o
f the hands-free profi le.

Th
en select and confi rm:


- " Connect telephon
e
" / "Disconnect
telephone ": to connect / disconnect
the telephone or the hands-free
connection only.

-
" Connect media player" / r" Disconnect media player": to rconnect / disconnect only streaming.

- " Connect tele
phone + mediaplayer
" / "rDisconnect telephone +media player
": to connect / rdisconnect the telephone (hands-free
and streaming).
-
"Delete connection ": to delete the pairing. In
dicates that a device is connected.

193


05
To display the " TELEPHONE " menu:
- Make alon
g press on SRC/TEL.
- Or, press the control knob to
display the contextual menu. Select " Call
" and confi rm.
-
Or, press MENU
, select
" Telephone" and confi rm. Select
" Call
" and confi rm.

Select " Dial" to enter a number and confi rm.
To displa
y the "TELEPHONE" menu:


-
Make a long press on SRC/TEL.


- Or, press the dial to display thecontextual menu. Select "Call" andconfi rm.

-
Or, press MENU
, select"Telephone
" and confi rm. Select"Call" and confi rm.
Pr
ess the control knob to confi rm tostart the call.

Select "Calls list
" and confi rm.


MAKING A CALL - DIALLING
Select numbers one at a time using
the  and 
buttons and confi rm.


MAKING A CALL - RECENTLY CALLED
NUMBERS *

Select the number and confi rm to start
the call.

The calls list includes calls sent and received in the vehicle usin
g the connected telephone.

*

Depending on the compatibility of the telephone.
Correction allows numbers to be deleted one at a time.

It is possible to make a call directl
y from the telephone; park the
vehicle fi rst as a safety measure.

194


05USING THE TELEPHONE
To display the " TELEPHONE " menu:
-
Make a long press on SRC/TEL.
- Or, press the dial to display the contextual menu. Select "Call " and confi rm.
-
Or, press MENU, select
"Telephone " and confi rm. Select
"Call
" and confi rm.

Select " Directory" and confi rm.
An incoming call is announced by a ring and a superimposed displayin the multifunction screen.

Mobile

(depending on the informationavailable in the contact records of
the telephone connected). "
YES " to accept the call is selected bydefault.
Press the control knob to accept the call.
Select " NO
" and confi rm to reject thecall.


MAKING A CALL - FROM THE
DIRECTORY
Select a contact then confi rm.


RECEIVING A CALL
Select the number and confi rm.

A lon
g press on BACK
or on SCR/TEL
also rejects an incoming call. B
usiness


Home
or
Press one of these buttons to accept
t
he call.

195

05
During a call, press the control knob to
display the contextual menu.

Han
g up

In the contextual menu:

-
select "Telephone mode" to
transfer the call to the telephone.

-
deselect " Telephone mode
" totransfer the call to the vehicle. In th
e contextual menu:
-
select " Micro OFF
" to switch off themicrophone.
-
deselect " Micro OFF" to switch the
microphone on.

In certain cases, the combined mode has to activated
from the
telephone.
If the contact has been cut off, when
you reconnect on returning to
the vehicle, the Bluetooth connection will be restored automatically (depending on the compatibility of the telephone).


MANAGING CALLS


A long press on one of these buttons also ends the call.
In the contextual menu, select "Hangup " to end the call.
Secret - Mute

(so that the caller cannot hear)

Combined mode

(to leave the vehicle without ending the call)

198
06
Press ‘ to display the audio settings menu.

The settin
gs available are:


-
Ambience,


- Bass,

-
Treble,

- Loudness,

- Distribution: Personalised or Driver,

- Left / ri
ght balance,

- Fader
(front / rear balance),

-
Auto. volume.



SCREEN C


The distribution (or spatialisation using the Arkamys© system), is©
an audio process which allows the sound quality to be improved
according to the setting chosen, corresponding to the position of the
listeners in the vehicle.
AUDIO SETTINGS
Select and confi rm " Other settings…"
to display the next setting in the list. The Ambience, Treble and Bass audio settin
gs are different andindependent for each sound source.
On-board Audio: Arkamys© Sound Staging.©
With Sound Staging, the driver and passengers are immersed in an"audio scene" recreating the natural atmosphere of an auditorium:
truly a part of the scene and its surroundings.
This new sensation is made possible b
y software in the audio
system which processes the digital signals from the media players(radio, CD, MP3…) without changing the audio settings. Thisprocessing takes account of the characteristics of the passenger compartment to produce optimum results.
The Arkam
ys© software installed in your audio system processes©
the digital signal from the media players (radio, CD, MP3, ...) and recreates a natural musical scene, with harmonious placement of instruments and voices in the space in front of passengers, level
with the windscreen.

200
07 SCREEN MENU MAP






Personalisation-
configuration

Defi ne the vehicle parameters
Driving assistance

Parking assistance
Vehicle lightin
g
Daytime lights
Interior lighting
Follow-me-home headlamps

Choice of lan
guage

Displa
y confi guration
Choice of unit
s
Date and time adjustment
Display parameters
Bri
ghtness
1
2
3
2
3
2
3
1
1
2
2
2
2

202
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWER SOLUTION
The quality of receptionof the radio station
listened to graduallydeteriorates or the stored stations do not function(no sound, 87.5 MHz is
displayed...). The vehicle is too
far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
The environment
(hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode. This phenomenon is normal and does not indicate
a failure of the audio equipment.
The aerial is absent or has been damaged
(for example when going
through a car wash or into an underground car park). Have the aerial checked by a CITROËN dealer.

Sound cut-outs of 1 to2 seconds in radio mode.During this brief sound cut-out, the RDS searches for any frequency
permitting better reception of the station. Deactivate the RDS function if the phenomenon is
too frequent and always on the same route.
Th
e traffi c announcement(TA) is displayed. I donot receive any traffi c
information.Th
e radio station does not broadcast traffi c information. Tune to a radio station which broadcasts traffi c
information.

The stored stations arenot found (no sound,87.5 MHz is displayed...).
An incorrect waveband is selected. Press the BAND button to return to the wavebandon which the stations are stored.