Screen Citroen C1 2016 1.G Owner's Guide

141
C1_en_Chap07_info-pratiques_ed01-2016
Electrical energy economy mode*
System which manages the duration of use of certain functions to conserve a sufficient level of charge   in   the   battery.
After
  the   engine   has   stopped,   you   can   still   use   functions   such   as   the   audio   system, windscreen  
w

ipers,   dipped   beam   headlamps, courtesy   lamps,   etc.   for   a   maximum   combined   duration   of  
t

wenty minutes.
This
  period   may   be   greatly   reduced   if   the   battery   is   not   fully   charged.
Let
  the   engine   run   for   the   duration  
s

pecified   to   ensure   that   the   battery  
c

harge   is   sufficient.
Do
  not   repeatedly   and   continuously  
r

estart   the   engine   in   order   to   charge   the  
b

attery.
A
  flat   battery   prevents   the   engine   from  
s

tarting.
Refer
  to   the   "Battery"   section.
Switching to economy mode
Once this time has elapsed the active functions are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically next   time   the   vehicle   is   driven.
To restore the use of these functions
immediately,
  start   the   engine   and   let   it   run   for   at  
l

east   5   minutes.
*
  
O
nly   on   vehicles   with   the   "Keyless   Entry   and  
S

tarting"   system.
7
Practical information

144
C1_en_Chap07_info-pratiques_ed01-2016
Fitting roof bars
When fitting transverse roof bars, use the accessories   recommended   by   CITROËN   and  
f

ollow   the   manufacturer's   fitting   instructions.
For
  more   information,   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop. Please
  refer   to   national   legislation   in  
o

rder   to   comply   with   the   regulations  
c

oncerning   the   transportation   of   objects  
w

hich   are   longer   than   the   vehicle.
Maximum weight authorised on the bars,
for a loading height not exceeding 40 cm
(except bicycle carrier): 40 kg.
If the height exceeds 40 cm, adapt the
speed of the vehicle to the profile of the
road to avoid damaging the roof bars.
Changing a wiper 
b
lade
Removing the front wiper blade
F Raise   the   wiper   arm.
F  R emove   the   wiper   blade,   sliding   it   towards  
t

he   outside.
Fitting the front wiper blade
F Put  the   corresponding   new   wiper   blade   in  p
lace   and   fix   it.
F
 
F
old   down   the   wiper   arm   carefully.
To conserve the effectiveness of
the
  flat-blade   type   wiper   blades,   we  
r

ecommend   that   they   are:
-
 
h
andled   with   care,
-
 
c
leaned   regularly   with   soapy   water,
-
 
n
ot   used   to   hold   a   cardboard   sheet  
a

gainst   the   windscreen,
-
 
r
eplaced   at   the   first   signs   of   wear.
Practical information

147
C1_en_Chap07_info-pratiques_ed01-2016
1. Screenwash  fluid   reservoir.
2. C oolant   header   tank.
3.
 A

ir   filter.
4.
 B

rake   fluid   reservoir.
5.
 B

attery.
6.
 F

usebox.
7.
 E

ngine   oil   dipstick.
8.
 E

ngine   oil   filler   cap.
9.
 R

emote   earth   point.
Petrol engines
PureTech 82
VTi 68
For
 
access
 
to
 
the
 
brake
 
fluid
 
reservoir
 
a

nd
 
t

he
 
f

usebox,
 
u

nclip
 
t

he
 
p

lastic
 
c

over
 
a

t
 
the
 
base
 
of
 
the
 
windscreen,
 
pressing
 o
n
 
the
 
two
 
tongues.
Refer
 
to
 
the
 
"Changing
 
a
 
fuse"
 
section.
7
Practical information

150
C1_en_Chap07_info-pratiques_ed01-2016
Avoid prolonged contact of used oil or fluids   with   the   skin.
Most
  of   these   fluids   are   harmful   to  
h

ealth   or   indeed   very   corrosive.
Do
  not   discard   used   oil   or   fluids   into  
s

ewers   or   onto   the   ground.
Take
  used   oil   to   a   CITROËN   dealer   or  
a

  qualified   workshop   (France)   or   to   an  
a

uthorised   waste   disposal   site.
Used products
Fluid specification
For optimum cleaning and to avoid freezing, this   fluid   must   not   be   topped   up   or   replaced  
w

ith   plain   water.
In
 
w
intry  
c
onditions,  
i
t  
i
s  
r
ecommended  
t
hat  
y
ou  
u

se   an   ethyl   alcohol   or   methanol   based   fluid.
Screenwash fluid level
Top up the level when necessary.
Coolant level
The coolant level must be:
-  b etween   the   "FULL " or "F"
  and  
"LO

W" or " L"
  marks   for   VTi   68  
a

nd   VTi   68   S&S   engines,
In
 
addition,   as   the   cooling   system   is   pressurised,
 w

ait
 
at
 
least   one   hour   after   switching   off   the
 e

ngine
 
before   carrying   out   any   work.
To
 
avoid
 
any   risk   of   scalding,   unscrew   the   cap
 b

y
 
two
 
turns   to   allow   the   pressure   to   drop.   When
 t

he
 
pressure   has   dropped,   remove   the   cap   and
 t

op
 
up
 
the
  level.
Fluid specification
The coolant must conform to the ma nufacturer's r ecommendations.
The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades. -  
b
etween   the   "
MIN "   and   "
MAX "   marks   for  
t

he   PureTech   82   engine.
When   the   engine   is   warm,   the   temperature   of  
t

he   coolant   is   regulated   by   the   fan.
Practical information

168
C1_en_Chap08_en-cas-pannes_ed01-2016
Changing a fuse
Access to toolsThe fuseboxes are located behind the dashboard   in   the   passenger   compartment   and  
n

ext   to   the   battery   under   the   bonnet.
The
  extraction   tweezer   is   fixed   at   the   front   of  
t

he
 u
nderbonnet
 f
usebox.
F
 
U
nclip   the   plastic   cover,   located   below  
t

he   windscreen,   by   pressing   on   the   two  
c

atches.F
 
U
nclip   the   fusebox   cover   by   pressing   on  
t

he   lug   on   the   right.
F
 
R
emove   the   tweezer.
When
  unclipping   the   plastic   cover,   take  
c

are   not   to   remove   the   seal.
In the event of a breakdown

170
C1_en_Chap08_en-cas-pannes_ed01-2016
Dashboard fuses
The fusebox is located below the dashboard (driver's   side).
F

U
nclip the plastic cover for access to the
fuses.
When
  you   have   finished,   carefully   refit   the  
c

ove r. Fuse

N° Rating

(A) Functions
1 5Reversing   lamp   -   Fuel   injection   system   -   Audio   system   -  
V

SC system
2 15Front   and   rear   screenwash
3 5Main   distribution   unit   -   Instrument   panel   -   Display   screen   -   Air  
c

onditioning   -   Heated   rear   screen   and   door   mirror   heating   -  
H

eated   seats   -   Electric   fabric   roof   -   Audio   system
4 5Electric   power   steering   -   Stop   &   Start
5 15Rear wiper
6 5Cooling
  fan   -   ABS   system   -   VSC   system
7 25Front wiper
8 10Heated
  door   mirrors
9 1512
  V   socket   (120   W   max)
10 7. 5Door
  mirrors   -   Audio   system   -   Stop   &   Start   -   Instrument   panel   -  
D

isplay screen
In the event of a breakdown

171
C1_en_Chap08_en-cas-pannes_ed01-2016
FuseN° Rating
(A) Functions
11 5Steering
  lock   -   Fuel   injection   system   -   Electronic   gearbox
12 7. 5Airbags
13 5Instrument
  panel   -   Display   Screen   -   Stop   &   Start
14 15
**
Steering
  -   Fuel   injection   system   -   Brake   lamps
7. 5 *
15 7. 5 * *
Fuel
  injection   system   -   Stop   &   Start
10*
16 7. 5Engine
 d

iagnosis
17 10Brake
  lamps   -   Third   brake   lamp   -   Fuel   injection   system   -
ABS
  system   -   VSC   system   -   Electronic   gearbox   -   Keyless   Entry  
a

nd   Starting   system
18 10Sidelamps
  -   Number   plate   lamps   -   Rear   foglamp   -   Rear   lamps   -  

L

ighting   dimmer
19 40Air
 c

onditioning
*
 
PureTech   82   engine.
**
 
VTi   68   engine.
8
In the event of a breakdown

173
C1_en_Chap08_en-cas-pannes_ed01-2016
Fuse
N° Rating

(A) Functions
1 10Right
  hand   dipped   beam
2 10Left
  hand   dipped   beam   -   Headlamp   adjustment
3 7. 5Right
  hand   main   beam
4 7. 5Left
  hand   main   beam
5 * 15Fuel
  injection   system
6 * 7. 5Fuel
  injection   system
7 * 15Fuel
  injection   system
8 * 7. 5Cooling
  fan
9 7. 5Air
 c

onditioning
10 ** 7. 5Fuel
  injection   system   -   Brake   lamps   -   Third   brake   lamp
11 5Courtesy
  lamp   -   Boot   lamp
12 10
Direction indicators - Hazard warning lamps - Instrument panel - Display screen
Fuses under the bonnet
F Unclip  the   plastic   cover,   located   below  t
he   windscreen,   by   pressing   on   the   two  
c

atches.
F
 
U
nclip   the   fusebox   cover   by   pressing   on  
t

he   lug   on   the   right,   for   access   to   the   fuses.
When
  you   have   finished,   carefully   refit   the  
c

ove r.
*
  PureTech   82   engine.
**
  VTi   68   engine.
8
In the event of a breakdown

174
C1_en_Chap08_en-cas-pannes_ed01-2016
** VTi 68 engine.F use
N° Rating
(A) Functions
13 10Horn
14 30Distribution units
15 ** 7. 5Electronic
 g
earbox
16 7. 5Fuel   injection   system
17 7. 0Keyless   Entry   and   Starting   system
18 ** 7. 5Battery
19 25Fuel   injection   system   -   Cooling   fan
20 30Starter   motor
21 7. 5Steering   lock
22 25Front   lamps
23 7. 5Fuel   injection   system
24 7. 5Fuel   injection   system   -   Starter   motor   -   Electronic   gearbox   -  
Stop & Start
25 15Audio   system   -   "Keyless   Entry   and   Starting"   system
26 7. 5Instrument   panel   -   Display   screen
In the event of a breakdown

175
C1_en_Chap08_en-cas-pannes_ed01-2016
FuseN° Rating
(A) Functions
27 7. 5VSC
  system
28 60Passenger
 c

ompartment
 f
usebox
29** 125***Heated
  rear   screen   and   door   mirror   heating   -   Heated   seats   -  
Electric
  fabric   roof   -   ABS   system   -   VSC   system   -   Cooling   fan   -  
L

ED   daytime   running   lamps
30 50
Electronic
 g

earbox
40 Stop & Start
31 50Power
 s

teering
32 50*
Cooling
  fan
30
40
33 50ABS
  system   -   VSC   system
34 10Spare fuse
*
 
PureTech
 
82
 
engine.
**
 
VTi
 
68
 
engine.
***
  
T

his
 
fuse
 
must
 
be
 
replaced
 
only
 
by
 
a
 
C

ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
8
In the event of a breakdown