change CITROEN C1 2021 Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2021, Model line: C1, Model: CITROEN C1 2021Pages: 269, PDF Size: 7.63 MB
Page 151 of 269

149
C1_en_Chap07_info-pratiques_ed01-2016
The brake fluid level should be close to the "MA X" mark. If it is not, check
t
he brake pad wear.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for details of the interval for this operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
Topping-up the engine oil
Oil grade
The oil must be the correct grade for your
e
ngine and conform to the manufacturer's
r
ecommendations.
Refer
to the under-bonnet view for the location
o
f the oil filler cap on your vehicle.
F
U
nscrew the filler cap for access to the
filler
orifice.
F
P
our in the oil in small quantities, avoiding
s
pills onto the engine (risk of fire).
F
W
ait a few minutes before checking the
l
evel again using the dipstick.
F
T
op-up again if necessary.
F
A
fter checking and topping up, carefully
r
efit the oil filler cap and the dipstick to its
h
ousing.
Engine oil change
Refer to the manufacturer's service schedule for details of the interval for this operation.
In
order to maintain the reliability of the engine
a
nd emissions control system, never use
a
dditives in the engine oil.
7
Practical information
Page 153 of 269

151
C1_en_Chap07_info-pratiques_ed01-2016
Checks
12 V battery
The battery does not require any maintenance.
H owever, check regularly that the terminals a
re correctly tightened (versions without quick
r
elease terminals) and that the connections
a
re clean.Refer to the manufacturer's service schedule for details of the
r
eplacement intervals for these
c
omponents.
Air filter and passenger compartment filter
Replace the oil filter each time the e ngine oil is changed.
Refer
to the manufacturer's
s
ervice schedule for details of
t
he replacement interval for this
c
omponent.
Oil filter
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise, have them checked by a CITROËN dealer or a qualified workshop.
Depending
on the environment (e.g. dusty
a
tmosphere) and the use of the vehicle
(e.g.
city driving), replace them twice as often
if necessary .
A
clogged passenger compartment filter may
h
ave an adverse effect on the per formance
o
f the air conditioning system and generate
u
ndesirable
o
dours.
When
carrying out any operation on the
12
V battery, refer to the corresponding section
f
or details of the precautions to be taken before
s
tarting work.
Manual gearbox
The gearbox does not require any maintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for the checking interval for
t
his
c
omponent.
Clutch
The clutch is operated mechanically and requires r egular a djustment.
Refer
to the manufacturer's service schedule
f
or information on when the adjustment should
be c
hecked.In
the event of an operating fault
(
difficulty moving off, for example),
c
ontact a CITROËN dealer or a
q
ualified
w
orkshop.
Versions
equipped
with
Stop
&
Start
are
f
itted
with
a
12
V
lead-acid
battery
of
s
pecific
t
echnology
a
nd
s
pecification.
Its
replacement
should
be
carried
out
o
nly
by
a
CITROËN
dealer
or
a
qualified
w
orkshop.
7
Practical information
Page 154 of 269

152
C1_en_Chap07_info-pratiques_ed01-2016
ETG gearbox
The ETG gearbox does not require any maintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for information on when this
u
nit should be checked.
Brake
wear depends on the style
o
f driving, particularly in the case
o
f vehicles used in town, over short
d
istances. It may be necessary to
Brake pads
For information on checking brake disc wear, contact a CITROËN dealer
o
r a qualified workshop.
Brake disc wearOnly use products recommended by CITROËN or products of equivalent
q
uality
an
d
sp
ecification.
In
order to optimise the operation of
u
nits as important as those in the
b
raking system, CITROËN selects and
o
ffers very specific products.
After
washing the vehicle, dampness,
o
r in wintry conditions, ice can form
o
n the brake discs and pads: braking
e
fficiency may be reduced. Make light
b
rake applications to dry and defrost
t
he brakes.
Parking brake
If excessive travel or a loss of effectiveness of this system is
n
oticed, the parking brake must be
c
hecked,
e
ven
b
etween
t
wo services.
Checking
this system must be done by a
C
ITROËN
dealer or a qualified workshop.
have
the
condition
of
the
brakes
checked,
even
b
etween
v
ehicle
s
ervices.
Unless
there
is
a
leak
in
the
circuit,
a
drop
in
t
he
brake
fluid
level
indicates
that
the
brake
p
ads
are
worn. To
avoid damaging the electrical units,
n
ever use a high pressure jet wash in
t
he engine compartment.
Practical information
Page 160 of 269

158
C1_en_Chap08_en-cas-pannes_ed01-2016
Spare wheel
F As far as possible, immobilise the vehicle o
n level, stable, non-slippery ground.
F
A
pply the parking brake.
F
S
witch off the ignition ("OFF "
mode for
v
ehicles fitted with "Keyless Entry and
S
tarting").
F
E
ngage first gear or reverse for a manual
g
earbox.
F
P
lace the gear selector at position N for an
ETG
electronic gearbox.
Parking the vehicle
Procedure for replacing a wheel with a damaged tyre by the spare wheel using the tools supplied with the vehicle.
F
I
f necessary, chock the wheel diagonally
o
pposite the wheel to be changed.
F
Y
ou must ensure that the occupants leave
t
he vehicle and wait in a safe location.
In the event of a breakdown
Page 166 of 269

164
C1_en_Chap08_en-cas-pannes_ed01-2016
Direction indicators
(PY 21W amber)
Sidelamps (W5W)
F Turn
the bulb holder one quarter of a turn a
nd remove it.
F
R
emove the bulb and change it.
If
you encounter any difficulties, contact a
C
ITROËN dealer or a qualified workshop.
F
T
urn
the
bulb
holder
one
quarter
of
a
turn
a
nd
remove
it.
F
R
emove
the
bulb
and
change
it.
Dipped beam headlamps
(H7 - 55W)
F Remove protective cover by pulling on t
he tag.
F
S
pread the spring to free the bulb holder.
F
R
emove the bulb holder and change the
b
ulb.
To
reassemble, carry out these operations in
r
everse
o
rder.
If
you encounter any difficulties, contact a
C
ITROËN dealer or a qualified workshop.
In the event of a breakdown
Page 167 of 269

165
C1_en_Chap08_en-cas-pannes_ed01-2016
Main beam headlamps (H7-55W)
F Remove protective cover by pulling on t
he tag.
F
S
pread the spring to free the bulb holder.
F
R
emove the bulb holder and change the
b
ulb.
To
r
eassemble,
c
arry
o
ut
t
hese
o
perations
i
n
r
everse
o
rder.
If
you encounter any difficulties, contact a
C
ITROËN dealer or a qualified workshop.
LED daytime running lamps
For the replacement of these lamps, contact a CITROËN dealer or qualified workshop.
8
In the event of a breakdown
Page 168 of 269

166
C1_en_Chap08_en-cas-pannes_ed01-2016
1. Brake lamps (P21/5W)
2. S idelamps ( P21/5W)
3.
D
irection indicators (PY21W)
4.
R
eversing lamp (P21W), near side
F
oglamp (P21W), offside
Rear lamps
These bulbs are changed by removing the lamp unit:
F
O
pen the boot.
F
T
ip the plastic cover and remove the screw.
F
M
ove the boot trim firmly aside.
D
eformation of the trim is normal.
F
U
nscrew the nut and remove it (take care
n
ot to drop it in the wing).
F
R
emove the lamp unit by pulling it firmly
o
utwards. F
A t the back of the lamp, remove the failed
b
ulb and change it.
When
refitting, proceed in the reverse order,
t
aking care to position the lamp unit correctly.
In the event of a breakdown
Page 169 of 269

167
C1_en_Chap08_en-cas-pannes_ed01-2016
Number plate lamps (W5W)
F Insert a thin screwdriver into one of the c
utouts in the the lens.
F
P
ush it outwards to unclip it.
F
R
emove the lens.
F
C
hange the faulty bulb.
Third brake lamp
(4 W5W bulbs)
F With the boot open, unclip the plastic cover.
F P ress the metal clips to disengage the lamp.
F
R
emove the lamp via the exterior of the
t
ailgate.
F
R
emove the bulb-holder by squeezing the
p
lastic catches.
F
C
hange the failed bulb(s).
Direction indicator side repeaters
(WY 5W amber)
F Push the repeater for wards or rear wards a
nd detach it by pulling towards you.
F
D
isconnect the bulb holder and change it.
To
refit,
press
on
the
lens
to
clip
it
in
place. To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown
Page 190 of 269

188
C1_en_Chap10a_ Autoradio-Toyota-tactile-1_ed01-2016
Steering mounted controls
Change multimedia source.
P ress and hold: mute / restore
s
ound from the radio or pause media
s
ources. Increase
volume.
Decrease volume.Reject
the incoming call.
End
the call in progress.
Other
than on a call: press to return
t
o the radio screen or the clock if the
r
adio is not active.
Radio:
change to preset radio
s
tations in ascending order.
Media: next track.
Radio: change to preset radio
s
tations in descending order.
Media: previous track.
Accept an incoming call.
Other than on a call: press to open
t
he list of contacts; a second press
o
pens the calls history.
A
Page 193 of 269

191
C1_en_Chap10a_ Autoradio-Toyota-tactile-1_ed01-2016
Level 1Level 2 Level 3 Comment
Audio source FM FM
radio
configuration Update
the list of stations Update the list to take account of reception.
List of stations Choose
to list by "Broadcaster" or "Alphabetic".
FM
traffic announcementsActivate
or deactivate options.
FM
alternative frequencies
Change
r
egional
c
ode
FM
radiotext
Presets List
of preset stations.
Stations List
of radio stations received.
Manual Search for stations step by step or
automatically.
Audio source
AM Presets
List
of preset stations.
Manual Search for stations step by step or
automatically.
Audio source DAB DAB radio
configuration
Update
the list of stations Update the list to take account of reception.
L- B a n d
Activate
or deactivate options.
DAB
traffic announcements
DAB
alternative frequencies
DAB
radiotext
Presets List
of preset stations.
Stations List
of radio stations received.
Manual Search for stations step by step or
automatically.
.
Audio and Telematics