Citroen C4 2014.5 2.G Owner's Manual

05
319
These
 
functions
 
are
 
only
 
available
 
if
 
Risk
 
Areas

 
have
 
been
 
downloaded

 
and
 
installed
 
on
 
the
 
system.
Select "Settings".
Select "Alert config.".
Risk area / Danger zone alert settings
It is then possible to activate Risk Areas
  alerts   then:
-  
"Audible
  warning"
-
 
"Alert
  only   when   navigating"
-
 
"Alert
  only   for   overspeed"
-
 
"Display
  speed   limits"
-
 
T
iming:   the   choice   of   timing   allows   the   time   before   giving   a   Risk  
Area

  alert   to   be   defined. Select "Confirm".
Press on Navigation   to   display   the   primary  
page

  then   go   to   the   secondary   page.
NAVIGATION - GUIDANCE

05
320
Adding a waypointOrganising waypoints
Select "Enter destination".
Select "Itinerary".
Select "Add waypoint" then "Address".
The
  address   of   the   waypoint   is   entered   in  
the

  same   way   as   a   destination,   so   enter  
the "

City:"   or   post   code,   the   "Road:"   and  
the "

N°:".   Confirm   each   time.
Then select "Add waypoint ". Select
  the   waypoint   that   you   want   to   move   in  the
  order.
To
  organise   waypoints,   carry   out   the   previous   operations   1   to   3  
again

  (Adding   a   waypoint).
Select "Up".
Select "Down".
Select "Delete".
Select "Road map"
  to   view   the   changes   made  
to

  the   route.
Select "Navigate to".
Select the criteria then "Confirm" to start
guidance
  and   give   the   general   direction   of   the  
navigation

  route.
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
NAVIGATION - GUIDANCE

05
321
Route options
Calculation criteria
Select "Settings".
Select "Criteria".It
  is   then   possible   to   choose:
-
 
the
  navigation   criteria:   "Fastest", "Shortest", "Time/distance",
"Ecological ".
-
 
the
  exclusion   criteria:   "Include tollroads ", "Include ferries",
"Traffic", "Strict", "Close".
Select "Confirm".
Press Navigation
  to   display   the   primary   page  
then

  go   to   the   secondary   page.
NAVIGATION - GUIDANCE
The ecological calculation is based on mapping data but this may not  always   be   correct.

05
322
Traffic information
Select "Traffic messages".
Press on Navigation   to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select   the   message   from   the   list   offered.
Select
  the   magnifying   glasses   to   have   the  
information

  spoken.
Set the "On the route
", "Around", "Near
destination "
  filters   to   fine-tune   the   list.
Press
  again   to   remove   the   filter. Select "Settings".
Select:
-
 
"
Warn of new messages",
-
 
"
Speak messages".
Then
  enter   the   filter   radius.
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Display of messages
Setting filters
We
  recommend   a   filter   radius   of:
-
 
12
  miles   (20   km)   in   urban   areas,
-
 
30
  miles   (50   km)   on   motorways.
TMC
  (Traffic   Message   Channel)   messages   on   GPS-Navigation  
contain

  traffic   information   transmitted   in   real   time.Select "Confirm".
TRAFFIC
Select "Info option
".

05
323
Red
 
and
 
yellow
 
triangle:
 
traffic
 
information,
 
for
 
example:
Modified
 
signs
Risk
 
of
 
explosion
Narrow
 
carriageway
Road
 
closed
Slippery surface
Demonstration Accident
Danger
d

elay
n

o entry
Roadworks
Traffic
 
jam
Main traffic symbols
Black
 
and
 
blue
 
triangle:
 
general
 
information,
 
for
 
example:
Weather reports Traffic
 
reports
Wind Fog
Parking Snow
 
/
 
ice Receiving TA messages
TRAFFIC
Select "Settings". Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Voice".
Activate
  /   Deactivate   "Traffic (TA)".
The
 
T
A
 
(Traffic  
Announcement)
  function   gives   priority   to  
T
A
 
alert  
messages.

 
T
o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.

05
Diverting from a route
Press on Navigation to display the primary page  then   go   to   the   secondary   page.
Select "Traffic messages ".
Select "Diversion".
Select
  the   diversion   distance   by   pressing  
+
or -.Select "Recalculate route".
 The   route  will
  be   modified   in   time   and   distance.
Select "Confirm".
The
  route   may   be   diverted   following   the   reception   of   a   traffic  
information

  message.
TRAFFIC
324

05
325
Map settings
MAP
Map orientation
Select "Map settings".
Select "Orientation". Select:
-
 
"
Flat view north heading"
  to   keep   the   map  
always

n orth up,
-
 
"
Flat view vehicle heading" to have the
map
  follow   the   direction   of   travel,
-
 
"
Perspective view"   to   display   a  
perspective

  view.
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Confirm"
  to   save   the   modifications.

05
Street names are visible on the map from the 100 m scale.
Configure
Select "
Aspect". Select:
- 
"
"Day" map colour"   to   have   the   map  
always

  in   day   mode.
-  
"
"Night" map colour
"   to   have   the   map  
always

  in   night   mode.
-  
"
Automatic day/night
" to have
the   brightness   of   the   map   adjusted  
automatically

  according   to   the   ambient   light  
level.
 This

  mode   makes   use   of   the   vehicle's  
sunshine

  sensor   or   by   manual   operation   of  
the

  vehicle's   lighting.
Select "Map settings". Press on Navigation
 
to
 
display
 
the
 
primary
 
page

 
then
 
go
 
to
 
the
 
secondary
 
page.
MAP
Then "Confirm" to save the modifications.
326

05
327
Navigation speech synthesis
Volume / Street names
Select "Settings".
Select "Voice".Select "Confirm"
  to   save   the   modifications.
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
SETTINGS
Select "Voice synthesis" and/or "Male voice"
and/or   "Female voice"   and/or   "Speak road
names".

06
328
CONFIGURATION
Level 1Level 2 Level 3
"Configuration"
Primary pageAudio settings
Audio settingsAudio settings