ignition Citroen C4 2015 2.G Repair Manual

177
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Manual parking brake
Applying
F Pull  the   parking   brake   lever   fully   up   to  i
mmobilise   your   vehicle.
Releasing
F Pull  the   parking   brake   lever   up   gently,  p
ress the release button then lower the
lever
 f

ully.
When the vehicle is being driven, if this warning   lamp   and   the   STOP w arning lam p c

ome   on,   accompanied   by   an   audible
 s

ignal   and   a   message   in   the   multifunction
 s

creen,   this   indicates   that   the   parking   brake
 i

s   still   on   or   has   not   been   properly   released.
When parking on a slope, direct your wheels   against   the   kerb,
apply
  the   parking   brake,   engage   a   gear  
a

nd   switch   off   the   ignition.
9
Driving

182
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
At low high speed, if reverse gear is requested, the N   indicator   flashes   and   the   gearbox   goes  
i

nto   neutral   automatically.   To   engage   reverse,  
p

ut   the   gear   lever   in   position   N, then position R .
Reverse
To engage reverse gear R,   the   vehicle   must   be  i
mmobilised   with   your   foot   on   the   brake   pedal.
F

Sel
ect position R .
Operating fault
Stopping the vehicle
When immobilising the vehicle, with t
he   engine   running,   you   must   place   the  
g

ear   lever   in   neutral   N.
Before
  carrying   out   any   work   in   the  
e

ngine   compartment,   ensure   that   the  
g

ear   lever   is   in   neutral N and that the
parking
  brake   is   applied.
Whatever
  the   circumstances,   you   must  
m

anually   apply   the   parking   brake   when  
p

arking,   unless   the   parking   brake   is  
p

rogrammed   in   automatic   mode.
Before
  switching   off   the   engine,   you   can:
-
 
m

ove   to   position   N   to   engage   neutral,


or
-
 
l

eave   the   gear   engaged;   in   this   case,   it   will  
n

ot   be   possible   to   move   the   vehicle.
In both cases, you must apply the parking
brake
 
to   immobilise   the   vehicle.
With   the   ignition   on,   the   flashing   of   AUTO
,
accompanied   by   an   audible   signal   and   a  
m

essage   in   the   screen,   indicates   a   malfunction  
o

f   the   gearbox.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
driving

186
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Manual operation
D disappears and the gears engaged   appear   in   succession   in  
t

he   instrument   panel.
Invalid value during manual
operation
This symbol is displayed if a gear is   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
If the lever is not in position P , when the
driver's  d oor  i s  o pened  o r  a pproximately  
4

5   seconds   after   the   ignition   is   switched  
o

ff,   there   is   an   audible   signal   and   a  
m

essage
 ap
pears.
F

R
eturn the lever to position P ;
 
t

he   audible   signal   stops   and   the  
m

essage
 d
isappears.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
six
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 p
ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 t
emporarily
 
in
 
automatic
 
mode.
If
 
the
 
engine
 
speed
 
is
 
too
 
low
 
or
 
too
 
high,
 
the
 
g

ear
 
selected
 
flashes
 
for
 
a
 
few
 
seconds,
 
then
 
t

he
 
actual
 
gear
 
engaged
 
is
 
displayed.
It
 
is
 
possible
 
to
 
change
 
from
 
position
 
D
(automatic)
 
to
 
position
 
M
 
(manual)
 
at
 
any
 
time.
When
 
the
 
vehicle
 
is
 
stationary
 
or
 
moving
 
v

ery
 
slowly,
 
the
 
gearbox
 
selects
 
gear
 
M1
automatically.
The
 
sport
 
and
 
snow
 
programmes
 
do
 
not
 
o

perate
 
in
 
manual
 
mode. Before
  switching   off   the   engine,   you   can  
e

ngage   position   P or N   to   place   the   gearbox   in  
neu

tral.
In
 
both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
t

o
 
automatic   mode.
Driving

187
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
When the ignition is on, the lighting   of   this   warning   lamp,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   multifunction  
s

creen,   indicates   a   gearbox  
m

alfunction.
Operating fault
You risk damaging the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f  
y
ou  
f
orce  
t
he  
l
ever  
f
rom  
p
osition P
to another position when the
battery
  is   flat.
To
  reduce   fuel   consumption   when  
s

tationary   for   long   periods   with   the  
e

ngine   running   (traffic   jam...),   position  
t

he   gear   lever   at   N and apply the
parking
  brake,   unless   it   is   programmed  
i

n   automatic   mode.
In
 
this
 
case,
 
the
 
gearbox
 
switches
 
to
 
back-up
 
m

ode
 
and
 
is
 
locked
 
in
 
3rd
 
gear.
 
You
 
may
 
feel
 
a

 
substantial
 
knock
 
when
 
changing
 
from
 
P
to R
 
and
 
from
 
N to R .
 
This
 
will
 
not
 
cause
 
any
 
d

amage
 
to
 
the
 
gearbox.
Do
 
not
 
exceed
 
60
 
mph
 
(100
 
km/h),
 
local
 
speed
 
r

estrictions
 p

ermitting.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
This
 
warning
 
lamp
 
may
 
also
 
come
 
on
 
if
 
a
 
door
 
i

s
 ope

ned.
9
Driving

192
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral and release the clutch pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an electronic gearbox , at a speed
below
  5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "   START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes for a few seconds, then
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
driving

194
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF"   switch   warning   lamp   flashes,  
t

hen   comes   on   continuously.
Ha

ve   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
This system requires a specific battery with a special   specification   and   technology   (reference  
n

umbers   available   from   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop).
Fitting
  a   battery   not   listed   by  
C

ITROËN introduces   the   risk   of   malfunction   of  
t

he   system.Before
  doing   anything   under   the  
b

onnet, deactivate the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
The   Stop   &   Start   system   makes   use  
o

f   advanced   technology.   All   work   on  
t

his   type   of   battery   must   be   done   only  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
the
 
event
 
of
 
a
 
fault
 
in
 
STOP
 
mode,
 
the
 v

ehicle
 
may
 
stall.
 
All
 
of
 
the
 
instrument
 p

anel
 
warning
 
lamps
 
come
 
on.
Depending
 
on
 
version,
 
an
 
alert
 
m

essage
 
may
 
also
 
be
 
displayed
 
asking
 
y

ou
 
to
 
put
 
the
 
gear
 
lever
 
into
 
position
 
N
and
 
put
 
your
 
foot
 
on
 
the
 
brake
 
pedal.
It is then necessary to switch off the
ignition,
 
then
 
restart
 
the
 
engine
 
using
 
t

he
 
key
 
or
 
the
 
"START/STOP"
 
button.
Reactivation
The system is reactivated automatically a t   every   new   start   using   the   key   or   the  
"

START/STOP"   button.
Press the "ECO OFF"
  switch   again.
The
 
system   is   active   again;   this   is   confirmed  
b

y
 
the
  switch   warning   lamp   going   off   and   the  
d

isplay   of   a   message.
Driving

195
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Lane departure warning system
Activation
Deactivation
DetectionOperating fault
System which detects the involuntary crossing o
f   longitudinal   traffic   lane   markings   on   the  
g

round   (solid   or   broken   line).
Sensors,
  fitted   below   the   front   bumper,   trigger  
a

  warning   if   the   vehicle   drifts   over   a   lane  
m

arking   (speed   higher   than   50   mph   (80   km/h)).
This
  system   is   particularly   useful   on   motor ways  
a

nd   main   roads. In
  the   event   of   a   malfunction,   the  
s

ervice   warning   lamp   comes   on,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   screen.
Contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
The   lane   departure   warning   system  
c

annot   in   any   circumstances   replace  
t

he   need   for   vigilance   on   the   part   of   the  
d

river.
It
  is   necessary   to   observe   driving  
r

egulations   and   take   a   break   every  
two
  hours. The
  detection   may   be   impeded:
- i f   the   sensors   are   dirty   (mud,   snow...),
-
 i

f   the   markings   on   the   ground   are
 w

orn,
-
i

f there is little contrast between the
markings
  on   the   ground   and   the   road
 s

ur face.
You
  are   warned   by   the   vibration   of   the   driver's  
s

eat   cushion:
-
 
o
n   the   right-hand   side,   if   the   marking   on  
t

he   ground   has   been   crossed   on   the   right,
-
 
o
n   the   left-hand   side,   if   the   marking   on   the  
g

round   has   been   crossed   on   the   left.
No
  warning   is   transmitted   while   the   direction  
i

ndicator   is   active   and   for   approximately  
2

0 seconds after the direction indicator is
switched
  off.
A
  warning   may   be   transmitted   if   a   direction  
m

arking   (e.g.   arrow)   or   non-standard   marking  
(

e.g.   graffiti)   is   crossed.
F

Press this button, the indicator lamp comes on.
F Press
  this   button   again,   the   indicator   lamp  g
oes   off.
The
  status   of   the   system   remains   in   the  
m

emory   when   the   ignition   is   switched   off.
9
Driving

196
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
blind spot sensors
This driving assistance system warns the driver of the presence of another vehicle in the blind
spot
  angle   of   their   vehicle   (areas   masked   from  
t

he   driver's   field   of   vision),   as   soon   as   this  
p

resents   a   potential   danger.
Operation
F On  switching   on   the   ignition,   or   engine  r
unning,   press   this   button   to   activate   the  
f

unction;   the   warning   lamp   comes   on.
Sensors
  fitted   in   the   front   and   rear   bumpers  
m

onitor   the   blind   spots.
A
 
warning
 
lamp
 
appears
 
in
 
the
 
door
 
mirror
 
on
 t
he
 
side
 
in
 
question:
-
 i
mmediately,
 
when
 
being
 
overtaken,
-

a

fter a delay of about one second, when
overtaking
 
a
 
vehicle
 
slowly.
This
 
system
 
is
 
designed
 
to
 
improve
 
s

afety
 
when
 
driving
 
and
 
is
 
in
 
no
 
c

ircumstances
 
a
 
substitute
 
for
 
the
 
use
 
o

f
 
the
 
interior
 
rear
 
view
 
mirror
 
and
 
door
 
m

irrors.
 
It
 
is
 
the
 
driver's
 
responsibility
 
to
 
c

onstantly
 
check
 
the
 
traffic,
 
to
 
assess
 
t

he distances and relative speeds
of other vehicles and to predict their
movements
 
before
 
deciding
 
whether
 
to
 
c

hange
 lan

e.
The
 
blind
 
spot
 
sensor
 
system
 
can
 
never
 
r

eplace
 
the
 
need
 
for
 
vigilance
 
on
 
the
 
p

art
 
of
 
the
 
driver.
driving

198
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
F To  deactivate   the   system,   press   this   button  a
gain;   the   warning   lamp   goes   off.
The
  state   of   the   system   remains   in   memory   on  
s

witching   off   the   ignition.
Operating fault
The system is automatically deactivated when   towing   with   a   towbar   approved   by  
CIT

ROËN. The
  system   may   suffer   temporary  
i

nterference in certain weather
conditions(rain,
 h
ail...).
In   particular,   driving   on   a   wet   sur face  
o

r   moving   from   a   dry   area   to   a   wet   area  
c

an   cause   false   alerts   (for   example,   the  
p

resence   of   a   fog   of   water   droplets   in  
t

he   blind   spot   angle   is   interpreted   as   a  
v

ehicle).
In bad or wintry weather, ensure that
the   sensors   are   not   covered   by   mud,   ice  
o

r   snow.
Take   care   not   to   cover   the   warning   zone  
i

n   the   door   mirrors   or   the   detection  
z

ones   on   the   front   and   rear   bumpers  
w

ith   adhesive   labels   or   other   objects;  
t

hey   may   hamper   the   correct   operation  o
f   the   system.
In   the   event   of   a   fault,   the   warning   lamp   in   the  
b

utton   flashes   then   goes   off.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

201
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
The programmed information is grouped together in   the   instrument   panel   screen.
6.
  S

peed   limiter   on   /   off   indication.
7.
  S

peed   limiter   mode   selection   indication.
8.
  P

rogrammed   speed   value.
9.
  S

election   of   a   memorised   speed.
Displays in the instrument panel
Speed limiter
The functions of this system are grouped together   on   the   steering   mounted   controls.
1.
 S

peed   limiter   mode   selection   wheel.
2.
 P

rogrammed   value   decrease   button.
3.
 P

rogrammed   value   increase   button.
4.
 S

peed   limiter   on   /   off   button.
5.
 L

ist   of   memorised   speeds   display   button.
Steering mounted controls
Operation
System which prevents the vehicle from exceeding the speed programmed by the driver.
W hen   the   programmed   speed   limit   is   reached,   pressing   the   accelerator   pedal   no   longer   has   any  
ef

fect.
The
  speed   limiter   is   switched on
 m
anually:
 i

t   requires   a   programmed   speed   of   at   least  
2

0 mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
The speed limiter cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
9
Driving