ignition Citroen C4 2016 2.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: C4, Model: Citroen C4 2016 2.GPages: 396, PDF Size: 10.22 MB
Page 25 of 396

23
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Warning/indicator lampis on Cause Action/Observations
AdBlue
® additive
(BlueHDi Diesel) fixed,
on switching o
n the ignition, a
ccompanied by an
a
udible signal and a
m
essage indicating the
r
emaining
d
riving
r
ange.The
remaining driving range is b
etween 350 miles (600 km) and
1
500 miles (2400 km).Have the AdBlue® additive tank topped up as soon a
s
possible:
go
to
a CITROËN dealer or a qualified
w
orkshop,
or
carry out this operation yourself.
+ flashing
associated
with
t
he
SERVICE
warning
l
amp,
accompanied
by
a
n
audible
signal
and
a
m
essage
indicating
the
r
emaining
d
riving
r
ange. The
remaining
driving
range
is
b
etween
0
and
350
miles
(600
km). You
must
top-up the AdBlue
® additive tank to avoid
a
breakdown :
go
to
a
CITROËN dealer or a qualified
w
orkshop,
or
carry
out
this
operation yourself.
flashing,
as
sociated
w
ith the SERVICE
warning
lam
p,
a
ccompanied
by
an
a
udible
signal
and
a
m
essage
indicating
that
s
tarting
is
prevented. The AdBlue
® tank is empty: the s
tarting
inhibition system required
b
y
legislation prevents starting of the
e
ngine. To
be able to start the engine, you must top-up the
AdBlue® additive tank: go to a CITROËN dealer or a
qualified workshop, or carry out this operation
y
ourself.
It is essential
to add at least 3.8 litres of AdBlue
® to
the
additive
tank.
For
topping-up
or
for
more
information
on
the
AdBlue
® additive, refer to the corresponding section.
1
Instruments
Page 26 of 396

24
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Warning/indicator lampis on Cause Action/Observations
+
+ SCR emissions
control system
(BlueHDi Diesel) fixed,
on switching on
t
he ignition, associated
w
ith the SERVICE and
engine
diagnostic warning
l
amps, accompanied by
a
n audible signal and a
m
essage.A
fault with the SCR emissions
c
ontrol system has been detected.This
alert disappears once the exhaust emissions
r
eturn to normal levels.
flashing,
on switching on
t
he ignition, associated
w
ith the SERVICE and
engine
diagnostic warning
l
amps, accompanied by
a
n audible signal and a
m
essage indicating the
r
emaining
d
riving
r
ange.After
confirmation of the fault with the
e
missions control system, you can
d
rive for up to 650 miles (1 100 km)
b
efore the engine starting inhibition
s
ystem is triggered.Contact
a CITROËN dealer or a qualified
w
orkshop without delay, to avoid a breakdown .
flashing,
on switching on
t
he ignition, associated
w
ith the SERVICE and
engine
diagnostic warning
l
amps, accompanied by
a
n audible signal and a
m
essage.You
have exceeded the authorised
d
riving limit following confirmation
o
f a fault with the emissions control
s
ystem: the engine starting inhibition
s
ystem prevents starting of the
e
ngine.To
be able to start the engine, you must call on a
CITROËN
dealer or a qualified workshop.
Instruments
Page 28 of 396

26
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Warning/indicator lampis on Cause Action/Observations
Parking brake fixed. The
parking brake is applied or not
p
roperly
r
eleased.Release
the parking brake to switch off the warning
l
amp, keeping your foot on the brake pedal.
Observe
the safety recommendations.
For
more information on the manual or electric parking
b
rake, refer to the corresponding section.
Electric parking
brake fixed.
The
electric parking brake is applied. Release the electric parking brake to switch off the
w
arning lamp: with your foot on the brake pedal, pull
t
he electric brake control.
Observe
the safety recommendations.
For
more information on the electric parking brake,
r
efer to the corresponding section.
Deactivation of
the automatic
functions of the
electric parking
brake fixed.
The
"automatic application" (on
s
witching off the engine) and
"
automatic release" functions are
d
eactivated or faulty.Activate
the function (depending on the country of
s
ale) via the vehicle configuration menu or contact a
C
ITROËN dealer or a qualified workshop.
Diesel engine
pre-heating fixed.
The
ignition switch is at the
2nd position (Ignition on) or the "ST
ART/STOP "
starting button has
b
een pressed. Wait
until the warning lamp goes off before starting.
Once it goes off, starting is immediate, on condition t
hat the brake pedal remains pressed with an
a
utomatic gearbox, or the clutch pedal is pressed fully
d
own with a manual gearbox.
The
period of illumination of the warning lamp is
d
etermined by the ambient conditions (up to about
t
hirty seconds in severe winter conditions).
If
the engine does not start, switch the ignition off and
t
hen on, wait until the warning lamp goes off again,
t
hen start the engine.
Instruments
Page 32 of 396

30
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service indicator
System that informs the driver when the next service is due, in accordance with the
ma
nufacturer's
ser
vice
s
chedule.
The point at which the service is due
is
calculated from the last service
i
ndicator zero reset, according to the distance
c
overed and the time elapsed since the last
ser
vice.
For BlueHDi Diesel versions, the level of
deterioration
of the engine oil may also be
t
aken into account, depending on the country
o
f sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition is switched on, no service information appears in the instrument panel central screen.
Between 600 miles (1 000 km)
and 1800 miles (3 000 km) remain
before the next service is due
For a few seconds after the ignition is switched on, the spanner symbolising the service o
perations comes on. The distance recorder
d
isplay line or a specific message in the
i
nstrument panel central screen indicates the
d
istance
r
emaining
b
efore
t
he
n
ext
ser
vice
i
s
d
ue.
For example:
1 700 miles (2 800 km) remain
b
efore the next service is due.
For
a few seconds after the ignition is switched
o
n, the screen indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles (900 km) remain before t
he next service is due.
For
a few seconds after the ignition is switched
o
n, the screen indicates:
A
few
seconds
after
the
ignition
is
switched
on,
t
he spanner goes off ;
the
distance
recorder
r
esumes
its
normal
operation.
The
screen
then
i
ndicates
the
total
and
trip
distances. A
few seconds after the ignition is switched
o
n, the distance recorder resumes its normal
ope
ration.
T
he spanner remains on to
indicate
that a service must be carried out
s
oon.
Instruments
Page 33 of 396

31
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service overdue
For a few seconds after the ignition is switched on, the spanner flashes to indicate that the service
must
be carried out as soon as possible.
Example:
the service is overdue by 180 miles
(
300 km).
For
a few seconds after the ignition is switched on,
t
he screen indicates:
A
few seconds after the ignition is switched
o
n, the distance recorder resumes its normal
ope
ration.
T
he spanner remains on .
For BlueHDi Diesel versions, this alert is also
accompanied
by the fixed illumination of the
S
ervice warning lamp when the ignition is
s
witched on. The
spanner comes on if you have
e
xceeded the specified time interval
s
ince the last service, as indicated in
the
ma
nufacturer's
ser
vice
s
chedule.
For BlueHDi Diesel versions, the
spanner
may also come on before the
n
ormal service point, according to the
l
evel of deterioration of the engine oil,
w
hich
d
epends
o
n
t
he
d
riving
c
onditions
i
n which the vehicle is used.
1
Instruments
Page 34 of 396

32
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service indicator zero reset
After each service, the service indicator must be reset to zero.
If you have carried out the service on your
vehicle
y
ourself:
F
s
witch off the ignition,
F
p
ress and hold the ".../000" trip distance
recorder zero reset button,
F
s
witch
o
n
t
he
i
gnition;
t
he
d
istance
r
ecorder
d
isplay begins a countdown,
F
w
hen the screen indicates "=/0" and the
spanner
disappears, release the button.Following
this operation, if you wish to d
isconnect the battery, lock the vehicle a
nd wait at least five minutes for the
z
ero reset to be registered.
Instruments
Page 35 of 396

33
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Range indicators
Once the AdBlue® tank is on reserve or after d
etection
of
a
fault with the SCR emissions
c
ontrol
system,
when the ignition is switched
o
n,
an
indicator
displays an estimate of the
d
istance
that
can
be covered, the range, before
e
ngine
starting
is
prevented.
In
the
event
of
simultaneous system fault and
l
ow AdBlue
® level, the shortest range figure is t
he
one
displayed.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
W hen the ignition is switched on, no
i
nformation on range is displayed automatically
i
n the instrument panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning lamp comes on, accompanied by an
a
udible signal and the temporary display in
t
he instrument panel of "NO START IN" and
a
distance, indicating the remaining range
e
xpressed in miles or kilometres before engine
s
tarting is prevented - (For example "NO
S
TART IN 900 miles" means that "Starting will
b
e prevented in 900 miles).
When
driving, this display appears every
1
50 miles (300 km) until the additive tank has
be
en
t
opped-up.
Go
to a dealer CITROËN or a qualified
w
orkshop to have the AdBlue
® tank topped-up.
Y
ou
can
also
top-up
the
tank
yourself.
For
more
information
on
topping-up the
Ad
Blue
® additive, refer to the corresponding s
ection.
The
engine
start
prevention
system
r
equired
by
regulations
is
activated
a
utomatically
once
the
AdBlue
® tank is e
m pt y.
1
Instruments
Page 36 of 396

34
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE w
arning lamp comes on and the UREA
w
arning lamp flashes, accompanied by an
a
udible signal and the temporary display in
t
he instrument panel of "NO START IN" and
0 k
m or miles - ("NO START IN 0 miles" means
"
Starting
p
revented").
The AdBlue
® tank is empty: t he s ystem r equired b
y
regulations prevents engine starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning lamp comes on and the UREA
w
arning lamp flashes, accompanied by an
a
udible signal and the temporary display in
t
he instrument panel of "NO START IN" and
a
distance indicating the remaining range
e
xpressed in miles or kilometres before engine
s
tarting is prevented - (For example "NO
S
TART IN 180 miles" means "Starting will be
p
revented in 180 miles).
When
driving, this display appears every
3
0 seconds until the additive tank has been
t
opped-up.
Go
to a CITROËN dealer or a qualified
w
orkshop to have the AdBlue
® tank topped-up.
Y
ou
can
also
top-up
the
tank
yourself.
Other wise you will not be able to restart your
engine.
For
more
information
on
topping-up the
Ad
Blue
® additive, refer to the corresponding s
ection. To
be able to start the engine,
w
e recommend that you call on
a
CITROËN dealer or a qualified
w
orkshop for the top-up required. If
y
ou carry out the top-up yourself, it is
essential to add at least 3.8 litres of
Ad
Blue
® to the additive tank.
F
or
more information on topping-up
t
he AdBlue
® additive, refer to the
corresponding s ection.
Instruments
Page 37 of 396

35
C4-2_en_Chap01_instruments-de-bord_ed02-2015
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
The UREA, SERVICE and diagnostic warning
l
amps comes on, accompanied by an audible
s
ignal and the display of the message
"
Emissions
f
ault".
The
alert is triggered when driving, when
t
he fault is detected for the first time, then
w
hen switching on the ignition for subsequent
j
ourneys, while the fault persists. During an authorised driving phase
(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed (after 3
0 miles (50 km) covered with the permanent d
isplay of the message signalling a fault), the
S
ERVICE and engine diagnostic warning lamps
c
ome on and the UREA warning lamp flashes,
a
ccompanied by an audible signal and the
t
emporary display in the instrument panel of
"
NO START IN" and a distance, indicating the
r
emaining range express in miles or kilometres
b
efore engine starting is prevented - (e.g.: "NO
S
TART IN 350 miles" means "Starting will be
p
revented in 350 miles").
A
system
that
prevents
engine
starting
is
activated automatically from 650 miles (1 100 km) after confirmation of a fault with the SCR emissions
c
ontrol
system.
Have
the
system
checked
by
a CITROËN dealer or a qualified workshop as soon as possible.
If
it
is
a
temporary
fault,
the
alert
d
isappears
during
the
next
journey,
a
fter
a
self
diagnosis
test
of
the
SCR
e
missions
control
system. While
driving, this display appears every 3
0 seconds while the fault with the SCR system
p
ersists.
The
alert is repeated when switching on the
ig
nition.
You
should go to a CITROËN dealer or a
q
ualified workshop as soon as possible.
Other wise, you will not be able to restart your
engine.
1
Instruments
Page 38 of 396

36
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Starting prevented
Every time the ignition is switched on, the
S
ERVICE and engine diagnostic warning
l
amps come on and the UREA warning lamp
f
lashes, accompanied by the temporary display
o
f "NO START IN" and 0 miles or kilometres -
(
"NO START IN 0 miles" means "Starting
p
revented").
To
be able to start the engine, you must call on
a
CITROËN dealer or a qualified workshop.
You
have exceeded the authorised
d
riving limit: the starting prevention
s
ystem inhibits engine starting.
Distance recorders
The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
w
hen the driver's door is opened and when the
v
ehicle is locked or unlocked.
Trip distance recorder
Total distance recorder
Measures the total distance travelled by the
vehicle
since its first registration. Measures the distance travelled since it was
last
reset to zero by the driver.
F
W
ith the ignition on, press and hold this
b
utton until zeros appear.
Instruments