ignition Citroen C4 PICASSO 2015 2.G Owner's Guide

71
Electric windows
Manual operation
To open or close the window, press or pull the switch   gently.   The   window   stops   as   soon   as   the  
s

witch   is   released.
Safety anti-pinch
When the window rises and meets an obstacle, it   stops   and   immediately   partially   lowers   again.
In
  the   event   of   unwanted   opening   of   the  
w

indow   on   closing,   press   the   switch   until   the  
w

indow   opens   completely,   then   pull   the   switch  
i

mmediately   until   the   window   closes.   Continue  
t

o  
h
old  
t
he  
s
witch  
f
or  
a
pproximately  
o
ne  
s
econd  
a

fter   the   window   has   closed.
The
  safety   anti-pinch   function   is   not   active  
d

uring   this   operation.
1.
 L

eft
 
hand
 
front
 
electric
 
window.
2.
 R

ight
 
hand
 
front
 
electric
 
window.
3.
 R

ight
 
hand
 
rear
 
electric
 
window.
4.
 L

eft
 
hand
 
rear
 
electric
 
window.
5.
 D

eactivating
 
the
 
electric
 
window
 
switches
 
l

ocated
 
at
 
the
 
rear
 
seats.
Automatic operation
To open or close the window, press or pull s witch   fully:   the   window   opens   or   closes  
c

ompletely   when   the   switch   is   released.  
P

ressing   the   switch   again   stops   the   movement  
o

f   the   window.
The
  electric   window   switches   remain  
o

perational   for   approximately   45   seconds   after  
s

witching   off   the   ignition.
Once
  this   time   has   elapsed,   the   electric  
w

indows   will   not   operate.   To   reactivate   them,  
s

witch   the   ignition   on   again.
2
Access

76
System which registers the electrical settings of   the   driver's   seat.   It   enables   you   to   store   and  
r

ecall   two   positions   using   the   buttons   on   the  
s

ide   of   the   driver's   seat.
Storing driving positions
Storing a position
Using buttons M / 1 / 2
F Switch  on   the   ignition.
F  A djust   your   seat   and   the   door   mirrors.
F

P
ress button M , then press button 1 or 2
within
  four   seconds.
An
  audible   signal   indicates   that  
t
he   position   has  
b

een   stored.
Storing
  a   new   position   cancels   the   previous  
p

osition.
Recalling a stored position
Ignition on or engine running
F Press button 1 or 2 to recall the corresponding p osition.
 A

n   audible   signal   confirms   that   adjustment  
i

s   complete.
You
  can   interrupt   the   current   movement   by  
p

ressing   button   M, 1 or 2
  or   by   using   one   of   the  
s

eat   controls.
A
  stored   position   cannot   be   recalled   while  
d

riving.
Recalling
  stored   positions   is   deactivated  
4

5 seconds   after   switching   off   the   ignition.
Comfort

89
Mirrors
Adjustment
F Move control A  to   the   right   or   to   the   left   to  s
elect   the   corresponding   mirror.
F

M
ove control B   in   all   four   directions   to  
adj

ust.
F

R
eturn control A   to   the   central   position.
Each
 
fitted
 
with
 
an
 
adjustable
 
mirror
 
glass
 
p

roviding
 
the
 
lateral
 
rear ward
 
vision
 
necessary
 
f

or
 
overtaking
 
or
 
parking.
 
They
 
can
 
also
 
be
 
f

olded
 
for
 
parking
 
in
 
confined
 
spaces.
Demisting - Defrosting
Door mirrors
Demisting-defrosting of the door m irrors   operates   with   the   engine  
r

unning,   by   switching   on   the   heated  
re

ar
 sc
reen.
Refer
  to   the   "Rear   screen   demist-
defrost"
 s

ection. As
  a   safety   measure,   the   mirrors   should  b
e   adjusted   to   reduce   the   "blind   spots".
The
  objects   observed   are,   in   reality,  
c

loser   than   they   appear.
Take
  this   into   account   in   order   to  
c

orrectly   judge   the   distance   of   vehicles  
a

pproaching   from   behind.
Folding
F From  outside:   lock   the   vehicle   using   the  e
lectronic   key   or   the   Keyless   Entry   and  
S

tarting   system.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If
  the   mirrors   are   folded   using   control   A,
they
  will   not   unfold   when   the   vehicle   is  
u

nlocked.   Pull   again   on   control   A.
The
  folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
F
 
F
rom   outside:   unlock   the   vehicle   using   the  
e

lectronic   key   or   the   Keyless   Entry   and  
S

tarting   system.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
Unfolding
If necessary, it is possible to fold the mirrors m anually.
3
Comfort

97
Dual-zone automatic air conditioning
This air conditioning system operates with the engine running, but the ventilation and its controls are   available   with   the   ignition   on.
Operation
  of   the   air   conditioning   and   regulation   of   temperature,   air   flow   and   air   distribution   in   the  
p

assenger   compartment   are   automatic.Temperature adjustment
1. Automatic  mode.
2. D river's   side   temperature   adjustment.
3.
 P

assenger's
 s
ide
 t
emperature
 a
djustment. The
  driver   and   front   passenger   can   each   set  
t

he
 t
emperature.
F
P
ress one of these buttons
to   increase   the   value.
The   value   indicated   corresponds   to   a   level   of  
c

omfort   and   not   to   a   precise   temperature.
It   is   recommended   that   you   avoid   a   left /right  
s

etting   difference   of   more   than   3.
Depending   on   the   colour   scheme   chosen,   the   system   controls   page   is   displayed   differently:
4. A ir   conditioning   On   /   Off.
5. A ir d istribution a djustment.
6.
 A

ir   flow   adjustment.
7.
 A

ir   intake   /   air   recirculation.
Press the button for the "
Air conditioning"   menu   to   display   the   controls   for   the   air   conditioning  
s

ystem.
F
P
ress one of these buttons
to   decrease   the   value.
3
Comfort

102
Front demist - defrost
F Press  this   button   to   demist   or  d
efrost   the   windscreen   and   side  
w

indows   as   quickly   as   possible.  
T

he   indicator   lamp   in   the   button  
c

omes   on.
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
The
 
system   automatically   manages   the   air  
c

onditioning   (depending   on   version),   air  
f

low
 
and
 
air   intake,   and   provides   optimum  
d

istribution   towards   the   windscreen   and   side  
w

indows.
F

T

o switch it off press this button, the
indicator
  lamp   goes   off.Ventilation with ignition on
function
With the ignition on, you can use the ventilation   system   and   have   access   to   the   "Air
conditioning "
  menu   to   adjust   the   air   flow   and  
a

ir   distribution   in   the   passenger   compartment.
This
  function   is   available   for   a   few   minutes,  
d

epending   on   the   state   of   charge   of   the   battery  
o

f   your   vehicle.
This
  function   does   not   activate   the   air  
c

onditioning.
You
  can   make   use   of   the   residual   heat   in   the  
e

ngine   to   warm   the   passenger   compartment  
u

sing   the   temperature   setting   buttons.
Comfort

127
Switching the ignition on
( without
 s
tarting)
With the ignition on, the system goes i
nto   energy   economy   mode   when  
n

ecessary   to   maintain   the   state   of  
c

harge   of   the   battery.
With
 
the   electronic   key   in   the   reader   or   the  
K

eyless   Entry   and   Starting   key   inside   the  
v

ehicle,   pressing   the   "START/STOP"   button,  
w

ith no action on the pedals
, allows the
ignition   to   be   switched   on.
F  
P
ress   the   "START/STOP"   button,  
t

he   instrument   panel   comes   on  
b

ut   the   engine   does   not   start.
F
 
P

ress   the   button   again   to   switch   off   the  
i

gnition   and   so   allow   the   vehicle   to   be  
lo

cked.
Anti-theft protection
Electronic engine immobiliser
The keys contain an electronic chip which has a
  secret   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   minutes  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.
In
  the   event   of   a   malfunction,   you   are   informed  
b

y   a   message   in   the   instrument   panel   screen.
In
 
t
his  
c
ase,  
y
our  
v
ehicle  
d
oes  
n
ot  
s
tart;  
c
ontact  
a

  CITROËN   dealer   as   soon   as   possible.
4
Driving

129
Label on door panel
Before leaving the vehicle, check that parking   brake   is   applied:   the   indicator  
l

amps   in   the   instrument   panel   and  
t

he   control   lever   must   be   on   fixed,   not  
f

lashing.
If
  the   parking   brake   is   not   applied,   there  
i

s   an   audible   signal   and   a   message   is  
d

isplayed   on   opening   the   driver's   door.
Never
  leave   a   child   alone   inside   the  
v

ehicle   with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.When
  towing,   parking   on   a   steep  s
lope, or if your vehicle is heavily
laden,
  turn   the   wheels   towards   the   kerb  
a

nd   engage   a   gear   (with   a   manual   or  
e

lectronic   gearbox)   or   place   the   gear  
s

elector in position P   with   an   automatic  
g

earbox.
For
  towing,   you   vehicle   is   approved   for  
p

arking   on   slopes   of   up   to   12%.
Manual operation
Application of of the parking brake is   confirmed   by   illumination   of  
t

he   brake   indicator   lamp   and   the  
P

 indicator   lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied".
Manual release
With the ignition on or the engine running, to release   the   parking   brake:
F
 
p
ress   the   brake   pedal,
F
 
w
hile   maintaining   pressure   on   the   brake  
p

edal,   briefly   push   the   control   lever.
The
  complete   release   of   the   parking   brake   is  
c

onfirmed   by   the   brake   indicator   lamp   and   the  
P

  indicator   lamp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the   message  
"

Parking   brake   released".
If you push the control lever without
pressing
  the   brake   pedal,   the   parking  
b

rake   will   not   be   released   and   a  
m

essage   is   displayed.
Manual application
With the  vehicle  stationary:  briefly  pull  the  control  lever.
Confirmation of the instruction is signaled by f
lashing   of   the   indicator   lamp   in   the   control  
l

eve r.
4
Driving

131
Special cases
Application of of the parking brake is   confirmed   by   illumination   of  
t

he   brake   indicator   lamp   and   the  
P

 indicator   lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied". The
  complete   release   of   the   parking  
b

rake   is   confirmed   by   the   brake  
i

ndicator   lamp   and   the   P   indicator  
l

amp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   released".
In
 
some
 
situations,   you   may   need   to   operate  
t

he
 
parking   brake   manually.
Immobilisation of the vehicle
with the engine running
To immobilise the vehicle with the engine r
unning,   briefly   pull   the   control   lever.
Parking the vehicle with the
brake released
In very cold conditions, it is recommended   that   the   parking   brake  
n

ot   be   applied   (risk   of   freezing).
To
  immobilise   your   vehicle,   engage   a  
g

ear   or   fit   a   chock   to   one   of   the   wheels.
Immobilisation of the vehicle with the
parking brake released
F
 
S

witch   off   the   engine.
 I

llumination   of   the   warning   lamps   in   the  
i

nstrument   panel   and   control   lever   confirm  
a

pplication   of   the   parking   brake,
F
 
S

witch   on   the   ignition   again,   without  
s

tarting   the   engine.
F
 
R

elease   the   parking   brake   manually   by  
p

ushing   the   control   lever   while   keeping  
y

our   foot   on   the   brake. F
 
S
witch   off   the   ignition.
4
Driving

140
To engage reverse gear R,   the   vehicle   must   be  i
mmobilised   with   your   foot   on   the   brake   pedal.
F

Sel
ect position R .
Reverse
Engagement of reverse gear is accompanied b
y   an   audible   signal.
At
  low   speed,   if   reverse   gear   is   requested,   the  
N

 indicator   flashes   and   the   gearbox   goes   into  
n

eutral   automatically.   To   engage   reverse,   put  
t

he selector lever in position N , then position R.Before
  switching   off   the   engine,   you   can:
-  
m
ove   to   position   N   to   engage   neutral,
or
-  
l
eave   the   gear   engaged;   in   this   case,   it   will  
n

ot   be   possible   to   move   the   vehicle.
Stopping the vehicle
In both cases, if automatic operation of the e
lectric   parking   brake   has   been   deactivated,  
y

ou   must   apply the parking brake
 
by   pulling  
t

he   control   lever.
When
  immobilising   the   vehicle,   with  
t

he   engine   running,   you   must   place   the  
s

elector lever in neutral N .
Before
  carrying   out   any   work   in   the  
e

ngine   compartment,   ensure   that   the  
s

elector lever is in neutral N   and   that  
t

he   parking   brake   is   applied.
Whatever
  the   circumstances,   you   must  
m

anually   apply   the   parking   brake   when  
p

arking,   if   automatic   operation   has  
b

een
 d
eactivated. With
  the   ignition   on,   the   flashing   of   A or
AUTO ,   accompanied   by   an   audible   signal   and  
a

  message,   indicates   a   malfunction   of   the  
g

earbox.
Operating fault
Have it checked by a CITROËN dealer or a q
ualified w orkshop.
In the event of a battery failure, use the
chock
 
to
 
immobilise
 
the
 
vehicle.
Driving

141
Automatic gearbox
This gearbox offers two driving modes.
-  a utomated  mode   for   automatic  
m

anagement   of   the   gears   by   the   gearbox,  
w

ithout   any   action   on   the   part   of   the   driver,
-
 
m
anual
 
mode   for   sequential   gear   changing  
b

y   the   driver   using   the   steering   mounted  
p

addles.
P.
 Pa

rk.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
a

pplied   or   released.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing,   vehicle   stationary   and   engine   at  
i

dle.
N.
 N

eutral.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
a

pplied.
-
 
S
tarting   the   engine.
D.
 A

utomatic
 ope
ration.
M.
 M

anual   operation   with   sequential   changing  
o

f   the   six   gears.Gear selector lever
To select position P,   move   the   gear  s
elector   to   the   highest   position  
(

towards  R),
  then   push   it   for wards   and  
t

hen   to   the   left.
Only
  engage   it   when   the   vehicle   is   at   a  
c

omplete   stop.   In   this   position,   the   front  
w

heels   are   locked.   Ensure   that   the   gear  
s

elector   is   correctly   positioned.
To
  move   the   gear   selector,   switch   on  
t

he   ignition   or   start   the   engine.
If
  the   battery   is   not   sufficiently   charged,  
i

t   is   not   possible   to   move   the   gear  
s

elector.
To
  come   out   of   position   P
,   move   the  
g

ear   selector   to   the   right   to   the   desired  
p

osition,   while   keeping   your   foot   on   the  
b

rake
 ped
al.
It
 
is
 
possible
 
to
 
change
 
from
 
one
 
mode
 
t

o
 
the
 
other
 
at
 
any
 
time.
With
 
the
 
automated
 
mode,
 
you
 
can
 
t

emporarily
 
take
 
control
 
of
 
the
 
gear
 
c

hanges
 
at
 
any
 
time.
4
Driving